Cheetah folding bike thank you for purchasing a dillenger cheetah folding bike, please read this manual before using this product..
2 t able of c ontents assembly instructions ............................................................................................................................................. 3 safety ............................................................................................................
3 a ssembly i nstructions it is very important to follow these instructions carefully before using this product for the first time. The bike will arrive fully assembled but in a stored state. Before it can be ridden please complete the following steps: 1. Remove the bike from packaging. Remove the z...
4 t aking c are o f y our b atteries charge the battery at least every 30 days make sure the battery is fully charged (as indicated by status on charger) before use. Q: i have had my electric bike a while now and it’s not going as far as it did when new, does the battery need replacing? – it is a po...
5 c harging the battery the charger is provided with the cheetah. 1. Do not use any other type of charger 2. Do not leave on charge for more than 12 hours 3. Do not leave a charging battery in the sun 4. Do not let the battery of charger get wet or damp 5. Make sure that the charging socket is all t...
6 m aintenance b rake adjustment f ront calliper brake adjustment : for front brake adjustments, please see this video: http://www.Youtube.Com/watch?V=w1xcwogltdk r ear brake adjustment : loosen the main cable tensioning nut as shown in this photo (other model shown): pulling the cable through in th...
7 f ine brake adjustment ( front and rear ) the fine brake adjustment is used to adjust the front and rear brakes as they are ‘run-in’ or to fine-tune the adjustment after adjusting the cable length as just described. This is how the mechanism looks when done up: the two silver nuts are used to tigh...
8 once the adjustment has been made, retighten the larger nut in place so the adjustment doesn’t change while riding. Tips on brake adjustment: 1. For front or rear, start by screwing in the fine adjustment so both nuts are all the way in 2. Then adjust the main cable length adjustment on the front ...
9 m otor c hain t ightening : for tightening the motor driver chain independently, here is the procedure: if you look at the motor, you will see it is mounted to a metal plate that pivots at one end. That plate is held in place by a large vertical bolt that goes through the plate and holds the plate...
10
11.
12.
13 t roubleshooting . Problem: cheetah will not turn on solution: check that the battery is correctly seated and is not being held off the terminals by the locking bolt being incorrectly positioned, preventing the battery from contacting the contacts. Check that the 4 metal terminals that you can se...
