Dimension One Spas AQUATIC FITNESS SYSTEM 2003 Owner's Manual - page 41
Aquatic Fitness System
2003Owner’s Manual
Symptom (Cont)
Problem
Corrective Action
High temperature condition:
Do not enter the spa water.
The water
temperature is above acceptable limits.
Water temperature has reached 110°F
(43.3°C.) The air blower and low speed
pump are activated to assist in lowering
water temperature.
No action required unless the water
temperature fails to return to acceptable
levels – in which case, call your dealer for
service.
High limit condition:
Do not enter the spa water.
The water temperature has reached 118°F
(47.8°C.) The entire system is disabled.
Call your dealer for service.
AquaFit™Dual Temp (Spa-Side)
Symptom
Problem
Corrective Action
“OH” on LED Digital Display
Window
High Temperature Condition:
Do not enter spa water.
The water
temperature is above acceptable limits.
The water temperature has reached
110°F (43.3°C.). The system will shut
down.
1.
Remove the cover and allow the
water to cool.
2.
Reset the power to the spa by
resetting the GFCI breaker.
No further action is required unless the
water temperature fails to return to
acceptable levels – in which case, call
your dealer for service.
3 Flashing Lights AND
“OH” on LED Digital Display
Window
High Limit Condition:
Do not enter spa water.
The water
temperature is above acceptable limits.
The water temperature has reached
118°F (47.8°C.). The system will shut
down.
Call your dealer for service.
3 Flashing Lights
System Error:
1.
Check the water level
2.
Clean the filters.
3.
If the problem persists, reset the
power to the spa by resetting the
GFCI breaker.
If the error is not resolved after
resetting the spa, call your dealer for
service.
37