1. DL manuals
  2. Dimplex
  3. Indoor Fireplace
  4. DF3033ST
  5. Owner's Manual

Dimplex DF3033ST Owner's Manual

Manual is about: Dimplex DF3033ST Electric fireplace Owner's Manual

Summary of DF3033ST

  • Page 1

    Owner’s manual model df3033st to view the full line of dimplex products, please visit www.Dimplex.Com 7209120100rev02 important safety information: always read this manual first before attempting to install or use this fireplace. For your safety, always comply with all warnings and safety instructio...

  • Page 2: Table of Contents

    2 www.Dimplex.Com welcome & congratulations . . . . . . . . . . . . . . . . . . . . . . . . 3 important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . 4 quick reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 site selection and preparation . . . . . . . ....

  • Page 3: Welcome & Congratulations

    3 welcome & congratulations thank you and congratulations for choosing to purchase an electric fireplace from dimplex, the world leader in electric fireplaces. Please carefully read and save these instructions. Caution: read all instructions and warnings carefully before starting installation. Failu...

  • Page 4

    4 www.Dimplex.Com ① read all instructions before using the electric fireplace. ② the heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. The trim around the heater outlet becomes hot during heater operation. Keep combustible materials, such as furniture, pillows, bedd...

  • Page 5: Save These Instructions

    5 save these instructions important safety instructions ⑬ do not modify the electric fireplace. Use it only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons. ⑭ avoid the use of an extension cord or power bar. Extension...

  • Page 6: Quick Reference Guide

    6 www.Dimplex.Com site selection and preparation quick reference guide ① prior to the first use of the fireplace verify the following: • are the circuit breakers for the unit on? • are the light bulbs in your fireplace loose? (to check, follow the instructions for replacing the light bulbs under the...

  • Page 7: Fireplace Installation

    7 site selection and preparation this section provides instructions for selecting a location and preparing the site to install the fireplace into your dimplex mantel surround. ① select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffic. ② for ...

  • Page 8: Fireplace Installation

    8 www.Dimplex.Com fireplace installation new wall construction ① select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffic. ② place the fireplace in the desired location to see how it will look in the room. ③ mark the desired location on the f...

  • Page 9: Fireplace Installation

    9 fireplace installation strip the individual conductor from the end. ③ loosen the screw securing the junction box cover and remove the cover. ④ take the cables out from the junction box, loosen the two wire twist nuts and remove the cord set (figure 2). ⑥ connect the black wire (live) from the unit...

  • Page 10: Fireplace Installation

    10 www.Dimplex.Com fireplace installation ⑨ place all connectors inside the unit and secure the junction box cover to unit. Ensure that the cable clamp grips only the jacket of service cable. Caution: clearance for air circulation beneath the fireplace insert is provided by two (2) rubber feet. Do n...

  • Page 11: Note:  When The Manual

    11 not run on the remote operated thermostat. ! Note: when the manual control switch is in the flame or flame & heat positions, the fireplace unit will not operate with the remote control. C. Initialization button used to synchronize the remote control with the fireplace. Resetting the temperature c...

  • Page 12: Operation

    12 www.Dimplex.Com operation ④ replace the battery cover. ! Note: when the “bat” symbol is present on the remote control it is recommended to replace the batteries promptly, to maintain full functionality of the remote/ fireplace. The remote transmitter has a battery backup time of only several hour...

  • Page 13: Operation

    13 operation button button on the remote. Your remote will now have a different frequency communicating with the fireplace. Remote control functions (figure 6) a. Room temperature b. Set temperature c. Dimmer d. Flame speed control e. Sleep timer f. Flame & heat on/off g. Temperature down h. Tempera...

  • Page 14: Operation

    14 www.Dimplex.Com operation b. Set temperature press f. Flame & heat on/off button to turn fireplace on. Press h. Temperature up to raise thermostat. Press g. Temperature down to lower thermostat. Press both h. Temperature up and g. Temperature down to change °f to °c. C. Dimmer press the f. Flame/...

  • Page 15: Operation

    15 operation temperature is higher then a. Room temperature the heat will come on. To turn the heat off, lower the b. Set temperature so that it’s setting is lower then the a. Room temperature. The default temperature setting is 72°f (22°c). ! Note: when using the remote control the heater runs on a...

  • Page 16: Maintenance

    16 www.Dimplex.Com maintenance light bulb replacement allow at least five (5) minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin. Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log ember bed ext...

  • Page 17: Maintenance

    17 maintenance ③ set log set in front of fireplace. ④ disconnect the log set led wire harness from unit. ⑤ gently pull the flicker rod to the right as far as possible into the rubber bushing on the flicker motor shaft (figure 9). Snaps into place under the mirror (figure 10). ! Note: ensure the log ...

  • Page 18: Maintenance

    18 www.Dimplex.Com maintenance to access the upper light bulb area: ① remove front glass assembly. ② upper bulbs are located in the upper left and upper right corners of fireplace (figure 8). ③ remove the upper light cover for each bulb (two (2) philips screws each). ④ unscrew bulbs counter clockwis...

  • Page 19: Warranty

    19 warranty products to which this limited warranty applies this limited warranty applies to the following model of your newly purchased dimplex electric fireplace df3033st and to newly purchased dimplex fireplace surrounds (mantels) and trims. This limited warranty applies only to purchases made in...

  • Page 20: Warranty

    20 www.Dimplex.Com services do not include in-home services. The above section is a summary only of your warranty rights. Please review the remaining provisions of this warranty for your specific rights. The limited 5 year warranty period for products other than fireplace surrounds (mantels) and tri...

  • Page 21: Warranty

    21 warranty without charge. If dimplex is unable to repair or replace such product or part, or if repair or replacement is not commercially practicable or cannot be timely made, dimplex may, in lieu of repair or replacement, choose to refund the purchase price for such product or part. This limited ...

  • Page 22: Warranty

    22 www.Dimplex.Com is responsible for all expenses incurred for repair or replacement of such product or part including, without limitation, all shipping costs and transportation costs to and from the authorized dealer’s or service agent’s business and all labour costs. Such costs shall not be the r...

  • Page 23: Replacement Parts List

    23 © 2009 dimplex north america limited dimplex north america limited 1367 industrial road cambridge on canada n1r 7g8 1. Log set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0439070100rp 2. Flicker motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...