1. DL manuals
  2. Dimplex
  3. Heater
  4. XLS12N
  5. Operating Instructions Manual

Dimplex XLS12N Operating Instructions Manual

Manual is about: storage heater

Summary of XLS12N

  • Page 1

    Contact details please note that some of the contact details on this pdf document may not be current. Please use the following details if you need to contact us: telephone: 0844 879 3588 email: customer.Services@gdcgroup.Co.Uk the customer support section of our website also features a wide range of...

  • Page 2: Storage Heaters

    Operating instructions storage heaters xln manual models: xl6n xl12n xl18n xl24n xlsn automatic xls6n xls12n xls18n xls24n these instructions should be read carefully and retained for future reference. Note also the information given on the appliance. Issue 1 january 2011 1224-xln/xlsn storage heate...

  • Page 3

    These instructions should be read carefully and retained for future reference. Note also the information given on the appliance. Important setting up your new heater setting up your new heater, called ‘commissioning’ is simple as instructed on page 3. Please note that the new materials in the heater...

  • Page 4

    Input output controls: output and input the benefits of storage heating one of the benefits of storage heaters is that after their night-time intake of off-peak electricity i.E. The ‘charge’ they will always emit some heat throughout the day and night. This helps to maintain a steady temperature so ...

  • Page 5

    Setting up your new heater 1 the controls there are two simple controls located at the top right of the heater. User adjustable controls are not provided on models xl6n or xls6n. 2 to commission a new heater set both the input and output controls to ‘max’ and leave for a minimum of 48 hours. After t...

  • Page 6

    5 input manual ‘boost’ operation 7 with the output control set on minimum (anticlockwise) the airflow release [boost] remains closed, and heat is released from the heater only by normal radiation and convection. This alone may provide sufficient heat on many occasions and therefore no adjustment of ...

  • Page 7

    Seasonal settings summer 1 in summer when you hopefully don’t need any heat you can switch the heater off at the wall socket. Turn it on again when you need heating. Preparing for colder weather 2 remember to turn the heater on at the wall switch. • allow 24 hours for the heater to ‘charge’. • adjus...

  • Page 8

    7 troubleshooting guide please note this guide refers to heaters being operated individually. If a central control system is installed some issues may require that you refer to the instructions provided with the system controlling the heaters. Issue solution my heater is too cold • has there been an...

  • Page 9

    Cleaning to maintain the external appearance of the radiator it need only be wiped over occasionally with a dry duster. During the summer months, or at other times when the appliance is not in use and is completely cold, the opportunity should be taken to wipe over with a damp cloth. Do not use abra...