E-Bench eBench KH 2242 Operating Instructions Manual - page 13
Operating Instructions|
GB
Continue pressing the “Next”/”Back” button until the
display indicates the number of the desired track.
Playback of the selected track commences instantly with-
out having to press the “Play/Pause” button.
c) … With stopped CD playback (PAUSE mode):
Continue pressing the “Next”/”Back” button until the
display indicates the number of the desired track.
The selected track is now automatically set in PAUSE
mode. To play simply press the “Play/Pause” button once.
.. Rapid search Forward/Reverse
Proceed in the following manner to select certain sections
within a track by rapid search Forward/Reverse …
Keep the “Next” button (rapid search forward) of the
“Back” button (rapid search reverse) depressed during
playback of the desired track.
The current music title (track) can now be heard at high speed
while the “Next” button forward or the “Back” button reverse
is kept depressed.
Release the “Next”/”Back” button as soon as the desired
section within the track is reached.
Playback from the selected point of the track is now automati-
cally continued at normal speed.
.. Repeat functions
The following can be set with the repeat functions …
• Repeat a single track of an audio CD
• Repeat the entire audio CD
... Repeat track
To repeat playback of a single track press the “Repeat” but-
ton once during playback of the desired title.
“RPT” flashing on the LCD display to the left of the current track
number indicates that track repeat has been switched on.
The selected track continues to be repeated until track re-
peat is switched off.
To turn off track repeat press the “Repeat” button twice.
“RPT” flashing on the LCD display to the left of the current
track number is turned off.
Manual_KH2242_EN
16.09.2003, 15:04 Uhr
13