E-Bench KH 2074 Operating Manual - Technical Data
48
49
Technical data
Camera
1. 8 mm image converter
2. Frequency band:
2.4 GHz ~ 2.483 GHz (4 channels)
3. Range:
up to 100 m (outside)
4. Current consumption (max.):
2.4 W
5. Power supply:
12V, 500 mA
6. Dimensions:
140 mm x 70 mm x 55 mm
Receiver
1. Frequency band:
2.4 ~ 2.483 GHz (4 channels)
2. AV-output:
SCART-cable
3. AV-input:
SCART-jack
4. Power supply:
12 V, 500 mA
5. Current consumption (max.):
3.6 W
6. Dimensions:
162 mm x 94 mm x 48 mm
Operating instructions
Read these operating instructions through carefully before using your surveillance
camera set for the first time and keep them in a safe place for future reference.
Safety instructions
• Do not dismantle a surveillance camera or its components since there is a danger
of an electric shock.
• Only use the cables provided to connect the components.
• If liquid should penetrate the device, disconnect it from the power supply
immediately to avoid the danger of a fire or an electric shock.
• Damaged parts may only be replaced by original spare parts. Do not attempt to
repair the surveillance camera or other components of the system yourself in the
case of a fault. If it does not function correctly or is in need of repair, please
contact our service partner near you.
• Before cleaning the surveillance camera and its components, disconnect it from
the power supply. Use a soft, clean, damp cloth for cleaning purposes.
• Do not use the system in the direct vicinity of heating, refrigerators or cookers.
• Make sure that TV sets, video recorders or DVD players that are to be connected
to the surveillance camera system have the CE mark.
• Only use original accessories from eBench to expand your surveillance camera
system to prevent damage to the devices and avoid personal danger.
• Your surveillance camera set complies with all European directives concerning
radio systems and radio interference; it is still possible, however, that other
devices can cause interference.