Kh2262 operating and safety instructions uk kh2262_lb4_uk_ka 13.11.2003 14:04 uhr seite 1.
2 tuning ▼ skip i function bass boost stop ■ display memory tuning ▲ skip >>i volume band m-up play pause st./mono repeat kh2262_lb4_uk_ka 13.11.2003 14:04 uhr seite 2.
3 contents contents 1. Intended use ......................................................................................................................4 2. Technical data ....................................................................................................................4 safety i...
4 cd stereo radiorecorder e-bench kh 2262 1. Intended use this appliance is designed for casual home-use. It is not designed for continual use or for use in a commercial or industrial context. To avoid fatal danger through electric shocks: • make sure that the power cable does not get wet or damp du...
5 3. Connection before you start using the device, please check that the device is in good order and condition, and make sure that all packa- ging material has been removed. 3.1 inserting batteries open the battery compartment at the back of the device, as well as … the cover of the battery compartm...
6 4. Operation this section applies when the device has been connected as described in chapter 3: 4.1 switching the device on/off the device is equipped with a function sliding switch for all three modes: the device is switched on and is consu ming electricity when the switch is switched to … • "rad...
7 when the desired memory number appears on the display ... Hold the memory button depressed until the "memory" indicator stops flas- hing. The channel is now stored. Already occupied memory positions can be renewed at will. 5.4 stored channels call up when in the normal reception mode you can brows...
8 6.5 programming a track list you can program a track list with up to 16 tracks. To do this the cd has to be stopped. When a cd is inserted: press memory. The display now shows "pr.01" indicating the first memory position of the track list - follo- wed by the number of the track already allo- cated...
9 7.2 using the tape unit warning: always press the stop / ej but- ton first and let the tape stop before you switch modes. This will prevent damage and the device wearing out prematurely. K the button symbols mean the following for tape mode: play = play a tape ❙❙ pause = stop/start pause >> rew = ...
10 8.1 external cleaning • clean all outside surfaces with a moist but not wet cloth. • do not use any sort of aggressive clea- ning fluids. These could damage the external plastic housing. 8.2 cleaning the cassette unit this could be necessary if you notice the tape sound becoming slightly muffled ...
11 10. Disposal before you dispose of the device, remove batteries as described in chapter 3.1. Old batteries cannot be disposed of in the general house rubbish bin. • always return used batteries to the retail outlet or other collection points for dis- posal. Other than the batteries, the device do...
Idnr. E45-221003-kh2262 · www.Kompernass.Com kh2262_lb4_uk_ka 13.11.2003 14:04 uhr seite 13.
