E&C Cheerups 1000 Installation Manual And Operators Instructions

Summary of Cheerups 1000

  • Page 1

    Line interactive ups cheerups cheerups cheerups he s c erup he s c erup an iso 9001:2008 company installation and operation manual.

  • Page 2: Package Contents

    Package contents page 2 you should have received the following items inside of package: - ups unit - installation and operation manual - communication cable (only for the model with usb/rs-232 port) product overview front view: rs-232 rs-232 usb usb in out 1 1 7 3 4 2 5 6 5 4 3 2 8 5 600 model w / r...

  • Page 3

    Note: before installation, please inspect the unit. Be sure that nothing inside the package is damaged. Placement & storage conditions install the ups in a protected area that is free of excessive dust and adequate air flow. Please place the ups away from other units at least 20cm to avoid interfere...

  • Page 4: Important Safety Warning

    Important safety warning (save these instructions) caution! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area free of conductive contaminants. (see the specifications for the acceptable temperature and humidity range.) caution! To reduce the ...

  • Page 5: Trouble Shooting

    Problem probable cause solution low battery battery fault ups is not turned on ups is overload ups is overload remove some critical load battery voltage is too low power cord is loose no led display on the front panel charge the ups at least 8 hours replace the battery with the same type of battery ...

  • Page 6: Specification

    Specification 7 page 6 installation and operation manual 1.0

  • Page 7: Warranty Policy

    Page 7 warranty introduction: electronics & controls power systems pvt. Ltd ("e&c") warrants that its products are free from defects in material and workmanship. During the warranty period, if the product fails under normal use in the recommended environment due to improper workmanship or materials,...

  • Page 8: Contact Information

    Contact information head office 29/a, 2nd phase, peenya industrial area, bangalore - 560 058, india. Tel no : +91-80-28371974 / 28379401, fax no : +91-80-28391587 for sales enquiries contact : sales@eandcpower.Com regional sales offices w ahmedabad w bangalore w chandigarh w chennai w cochin w hyder...