1. DL manuals
  2. E-Collar
  3. Pet Care Product
  4. Easy Educator EZ-902
  5. Quick Start Manual

E-Collar Easy Educator EZ-902 Quick Start Manual

Manual is about: Remote Education Collar

Summary of Easy Educator EZ-902

  • Page 1

    Easy educator ez-902 quick start guide e-collar technologies, inc..

  • Page 2: Welcome

    Welcome thank you for trusting us with your purchase of the 902 easy educator remote education collar. We have made every attempt to provide you with the most technologically advanced product using the most stringent quality and manufacturing standards. We are confident you will be pleased with the ...

  • Page 3: Table of Contents

    Table of contents 3 4 5 6 7 8 10 11 12 13 14 15 16 characteristics package contents turning on/off the ez-902 system / charging instructions ez-902 functions lcd display 2 dog mode buttons descriptions and stimulation button assignments i mode lock and unlock stimulation level booster level setup lo...

  • Page 4: Characteristics

    Characteristics 03 1/2 mile range employs quick charge li-polymer batteries convenient intensity dial for quick adjustment stimulation levels adjustable from 0 to 100 collar receiver light for night tracking “lock and set” stimulation safety feature user adjustable boosting levels provides 2 control...

  • Page 5: Package Contents

    Package contents 04 ergonomic transmitter - remote-sender quick start owner’s guide waterproof collar receiver high quality biothane strap test light 5/8” and ¾” contact points contact point tool lanyard battery charger splitter cable easy educator ez-902 quick start guide e-collar technologies, inc...

  • Page 6: Right Button For 1 Second.

    05 turn on/off the transmitter by pressing the lower right button for 1 second. To turn on/off the collar receiver simply position the red dot on the backside of the transmitter against the red dot on the collar receiver for 1 second. Turning on/off the ez-902 system splitter cable please charge the...

  • Page 7: Icon

    06 icon m m+ c+ c stimulation others i v t function momentary stimulation send momentary stimulation (volume level) momentary boost stimulation send momentary boosted stimulation (volume + boost level) continuous stimulation sends continuous stimulation instant mode without pressing any button, it w...

  • Page 8: Lcd Display

    07 lcd display 2 dog mode icon m m+ c+ c i v t number description momentary stimulation short pulse of stimulation momentary boost stimulation short pulse of boosted stimulation continuous stimulation up to 10 seconds of stimulationㅤ instant stimulation mode stimulation level displayed on the lcd, m...

  • Page 9: Buttons Descriptions and

    Buttons descriptions and stimulation button assignments the 902 easy educator has 4 control buttons which are assigned to stimulation, vibration and tone. S1 / s3 buttons are programmed for dog 1 and s2 / s4 buttons are programmed for dog 2. It also has 2 program buttons for changing modes (p) and t...

  • Page 10: Function

    09 function description power on/off night lights volume lock stimulation level lock mode buttons 1. To start instant mode, rotate volume to level 0 and press a button set to continuouss, "c" mode activates the "i" mode when pushed on level "0" 2. To exit from instant mode, press any button or wait ...

  • Page 11: “I” Instant Stim

    “i” instant stim “i” instant stimulation mode ulation mode the "i" mode is a patented feature which allows the stimulation to increase gradually as determined by the user. The gradual introduction of stimulation provides a more gentle sensation and removes the startling effect sometimes associated w...

  • Page 12: Second.

    Lock and unlock stimulation level for dog 1 lock and unlock stimulation level for dog 1 1. Check lcd display to confirm 1d icon is blinking. 2. Set the desired stimulation to lock by rotating the volume dial. 3. Press p button and s3 simultaneously and hold one second to lock. 4. Check lcd display t...

  • Page 13: Booster Level Setup

    Booster level setup 12 boost level setup for dog 1 boost level setup for dog 1 1. Change the mode of s1 or s3 button to momentary if not already programmed to “m” mode. 2. Change the stimulation level to “0” (stimulation level should be unlocked) 3. Press momentary button for more than 5 sec to ente...

  • Page 14: Timer.

    13 lost transmitter activation (6 hour timer) 1. Change the stimulation level to “0” 2. Press on/off button and then press p button simultaneously. 3. One short beep will sound confirming the activation of the locator timer. 4. To deactivate, press on/off button and p button one more time. 5. Two sh...

  • Page 15: Pairing

    14 pairing /syncing when you change transmitters or collar receivers they will need to be paired/ synced to each other for them to communicate with each other. Pairing for dog 1 (on/off + s3) pairing for dog 1 (on/off + s3) 1. Turn on the transmitter. 2. Rotate the volume dial to “0”. 3. Turn off th...

  • Page 16: Factory Default Setting

    15 ez-902 two dog default settings factory default setting of ez-902 is as below. You can change tone mode, vibration mode, and instant mode by using computer interface tool which can be downloaded on our website www.Ecollar.Com. Factory default setting s1-button s2-button s3-button s4-button boost ...

  • Page 17: Warranty and Registration

    16 warranty and registration two year full warranty: your product is covered by our full two year warranty. During the warranty period we will repair and or replace your product for any reason due to workmanship and component failures. Dog chews and misuse are not covered by the warranty and are sub...

  • Page 18: Contact Information

    This product is covered by various patents including but not limited to patents 8757098 and 8833309. Patent is pending on the instant stimulation feature on this device. Copyright 2014 e-collar technologies, inc. All rights reserved. Contact information e-collar technologies, inc. 2120 forrest park ...

  • Page 19: Important Information

    Important information about contact points: many dogs in our modern society have developed sensitivity to nickel which is a metal in all stainless steel products. Keep a watchful eye on your dogs skin where the contact points are touching his/her skin for redness or any signs of irritation. This sho...

  • Page 20

    E-collar technologies, inc. 2120 forrest park drive garrett, in 46738-1887 1-260-357-0051 (us & international) 1-855-326-5527 (us toll free) 1-855-226-5527 (us toll free fax) sales@ecollar.Com www.Ecollar.Com.