E-Image GH03 User Manual - page 9

MOUTING THE CAMCORDER VIA ADAPTER

4.Mounting the camcorder via adapter

4.1 Attach the slide plate to the camcorder adapter, screwing camera 

1/4" screw or 3/8" screw into the camcorder adapter's threaded hole 

WITHOUT APPLYING FORCE(such as using a coin).

4.2 Insert the plate into the plate mount. 

4.3 Please make sure pan & tilt knob are locked. Insert the slide plate 

onto the rear of the platform until locking button "C" clicks,then lock the

plate. Amount the camcorder on the adapter. Loose plate locking knob, 

adjust the center of gravity to right position, the lock the plate tightly.

Q

5.1 Attach the slide plate to the camcorder, screwing camera 1/4" screw 

or 3/8" screw into the camcorder's threaded hole WITHOUT APPLYING 

FORCE(such as using a coin).

5.2 Please make sure pan & tilt knob are locked. Hold the camera with 

one hand.Insert the slide plate onto the rear of the platform until locking 

button "C" clicks.Adjust the center of gravity to right position, the lock the

plate tightly.

MOUNTING THE CAMERA

9

10

5.Mouting the camera