Summary of ELI-ANPTZ-56-37R
Page 3: Welcome
Welcome thank you for purchasing our product. If there is any question or request, please do not hesitate to contact us. This manual is applicable to speed dome. This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice. The ...
Page 4: Safety Instruction
Elinetechnology.Com 2 safety instruction these instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “warnings” and “cautions”: warnings: neglecting any of the warnings may cause serious injury or death. C...
Page 5
E linetechnology.Com 3 5. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of ccd at the same time. 6. Please use the provided glove when open up the dome cover, avoid direct contact wit...
Page 6: Catalog
Elinetechnology.Com 4 catalog chapter 1 brief introduction ...................................................................................................... 5 1.1 description .................................................................................................................... 5 1...
Page 7: Chapter 1 Brief Introduction
E linetechnology.Com 5 chapter 1 brief introduction 1.1 description speed dome is new products model which features built-in auto focus camera module. Inner pan/tilt integrated with digital decoder which support line fault diagnosis, and 3d position function. Speed dome set up the precision sensitiv...
Page 8
Elinetechnology.Com 6 heat balance device built in, fog proof. Precise motor device which sensitively and steady. The accuracy deviation >0.1, no picture shake. Support online upgrade , reduce the service cost support 3d positioning function easy setting for dip and protocol friendly graphical user ...
Page 9
E linetechnology.Com 7 1 to 40, with the corresponding speed ranging from 1°/second to 40°/second. Presets: each of the user-definable presets can be programmed to use pan, tilt, camera settings and other settings. When preset is called, the dome will automatically move to the defined position. User...
Page 10
Elinetechnology.Com 8 enabled/disabled by the menu. Backlight compensation (blc): if a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation (blc) enhances objects in the center of the picture. The dome uses the center of the picture to a...
Page 11
E linetechnology.Com 9 following is the diagram: display n ne e se s sw w nw means north north east east east south south west south west west north 485 fault detect: the speed dome will display the fault case when there is some fault between control side and receiver side. For example: the fault of...
Page 12
Elinetechnology.Com 10 chapter 2 ir speed dome installation 2.1 install preparation 1. Basic requirement before the installation, please read following caution information: 1) installation and maintenance should be carried out by professional personnel as per relative regulations. All electrical wor...
Page 13
E linetechnology.Com 11 2)following is recommend max distance for 12vdc. Please refer the appendix 3 wire gauge&transmission distance cable diameter max distance(m/ft) 0.75mm 2 6m(20ft) 1mm 2 9m(30ft) 1.5mm 2 12m(40ft) 2mm 2 15m(50ft) 3. Please keep the product package well please keep the product p...
Page 14
Elinetechnology.Com 12 2.2.4 2.2.5 2.2.6 2.3 default setting protocol: auto match address: no.1 baud rate: 2400-n-8-1 120 Ω ohmic resistance ： 2.4 dip switch setting before install the speed dome, please configure the protocol, baud rate, and speed dome address. The dip switch is on side of speed do...
Page 15
E linetechnology.Com 13 1) protocol rule protocol sw1-1 sw1-2 sw1-3 auto match/pelco-d off off off ta off off on pelco-p on off off save …… …… …… 2) baud rate rules baud rate sw1-4 sw1-5 auto match/1200bps off off 2400bps on off 4800bps off on 9600bps on on 3) 120 Ω ohmic resistance configuration sw...
Page 16
Elinetechnology.Com 14 chapter 3 installation description 3.1 bracket dimension wall mount dimension ceiling mount dimension pole mount dimension corner mount dimension 3.2 wall mount 1 ） accessories installation wall mount bracket washer&screw cap.
Page 17
E linetechnology.Com 15 2 ） mount step 3.3 ceiling mount bracket installation 1 ） accessories installation ceiling mount bracket ( length optional) washer&screw cap 2 ） mount step 3.4 pole mount 1 ） accessories mount wall mount bracket pole mount bracket fastener washer,screws&crew cap.
Page 18
Elinetechnology.Com 16 2 ） mount step 3.5 corner mount 1 ） accessories mount wall mount bracket corner mount bracket washer,screws&crew cap 2 ） mount step.
Page 19: Chapter 4 Operation
E linetechnology.Com 17 chapter 4 operation 4.1 post( power on self test) the speed dome power on, execute the self test. The steps: system preheat( if it is necessary), camera test,pan test, tilt test. The self test display as pic 5.1.1, it is takes 40 sec. Note: if the speed dome address is unavai...
Page 20
Elinetechnology.Com 18 preset: the speed dome support 255 presets. The setting and operation, please reference by chapter 5.3. 4.3 special function preset call preset function call preset function 33 auto flip 93 limited direction of up,down,left,righ t setting 34 back to zero point 94 remote reboot...
Page 21
E linetechnology.Com 19 4.4 screen character prompted the speed dome supply the screen character prompted for easily to operation.It can display the multiples of lens,azimuth angle,alarm,date and title of the presets. Lens multiples: display the format for z xxx,xxx is multiples of lens. 3d position...
Page 22: Chapter 5 Menu Guide
Elinetechnology.Com 20 chapter 5 menu guide menu of speed dome as follows: remarks:if the menu have many pages need to display,customer can operate "down" of arrow keys for turn to next pages.There maybe difference in the camera module function.Different camera module's function may be display on th...
Page 23
E linetechnology.Com 21 5.1 menu operation guide call preset point no.95 to open the menu via controller keyboard,dvr,client software.Please refer to 5.1.1.For example,if you want to open the camera menu.You could enter ptz housing mode according to at front of panel with "ptz housing"button,then pr...
Page 24
Elinetechnology.Com 22 keyboard special definition key as below : “ ← ” ： delete one byte “ ┘ ” ： confirmation input and return “_” ： input space "abc/abc/pinyin" ： input method select button. Pic 5.1.1 input method when the input method is spell type,it will display the selected byte in third lines...
Page 25
E linetechnology.Com 23 5.3 function setting 5.3.1 display setting "display information setting" menu has two pages,as shown 5.3.1.Each menu item can be selected independently continuous display of the time,each items displays a fixed location in the video on the screen,the display time interval is ...
Page 26
Elinetechnology.Com 24 5.3.3 regional limit pic. 5.3.4 timer setting 5.3.2 timer setting as shown 5.3.5,move the keyboard joystick left and right or press the left and right button on front of dvr panel for change the menu items.Move the keyboard joystick up and down or press the up and down button ...
Page 27
E linetechnology.Com 25 parameters special meaning and setting method as follows: focus mode:optional automatic,hand and semi-automatic.In the automatic focus mode,speed dome will automatic adjust the focus of camera module,keeping clearly image.Control keyboard by hand or "focus+" and "focus-" butt...
Page 28
Elinetechnology.Com 26 image flip: you could set display the picture on the screen up,down,left and right reverse. Image mirror:the picture on the screen will reverse by right and left via this function shake reduction level:shake reduction have closed,high,medium and low four options,closed for don...
Page 29
E linetechnology.Com 27 left or right. Proportional zooming: when open proportional zooming function,the ptz housing will change the zoom according to zoom magnification in keyboard control state.When the zoom magnification is increased,the speed of speed dome will automatic change slowly;when the z...
Page 30
Elinetechnology.Com 28 1. Presets setting enter "presets setting" menu,shown in fig 5.3.10. Preset means the unit can monitor the zone among the specified presets 。 you could select cruise numbers from 1 to 8,the number of presets,speed or time through moving control keyboard joystick left and right...
Page 31
E linetechnology.Com 29 4. Partern scan enter"partern scan"menu,shown in pic.5.3.13. Partern scan means that user operation series action records inside the speed dome.Such as horizontal moving,camera module zooming,,etc. Pic. 5.3.13 partern scan setting pic.5.3.14 advance setting partern scan numbe...
Page 32
Elinetechnology.Com 30 5.3.7 alarm setting enter "alarm setting" menu,shown in pic.5.3.15 pic.5.3.15 alarm setting alarm channel:alarm channel can select the number from 1 to 4. Alarm switcher:selecting open or closed in alarm switcher. Alarm output channel: selected no.1 or no.2 channel in alarm ou...
Page 33
E linetechnology.Com 31 ir switch mode:ir switch mode can select ir open,closed,timing or auto. Photosensitive threshold: photosensitive threshold can select high,medium,low grades. White light protection mode:it can select high,medium and low three options,it can improve the white brighter performa...
Page 34
Elinetechnology.Com 32 5.8.10 application enter "application" menu.Shown in pic.5.3.18. Pic.5.3.18 application pic.5.3.19 communication check communication log:you could select open or closed.When the speed dome have problem,customer could send the communication log to our factory engineer for analy...
Page 35
E linetechnology.Com 33 pic.5.3.22 integral self-checking pic.5.3.23 ir self 5.3.11 privacy mask enter "privacy mask" menu,shown in pic.5.3.24.(remarks:some module camera don't support this function) pic. 5.3.24 privacy mask pic. 5.3.25 preset setting mask number: mask number can select from 1 to 24...
Page 36
Elinetechnology.Com 34 preset number:preset number can select the number from 1 to 48. Preset tile: press button for editing the tile of preset.See 5.3.1 area tilt setting as your reference. Setting preset: press button for setting preset.See pic. 5.3.1 area tilt setting as your reference. Call pres...
Page 37
E linetechnology.Com 35 lightning and surge protection this product adopts ceramic gas discharge tube and tvs-class lightning protection technology to effectively prevent such pulse signal damage caused by instantaneous lightning under 4000w or electric surge. But, for outdoor installing, on the pre...
Page 38
Elinetechnology.Com 36 appendix rs485 bus-mastering knowledge rs485 bus-mastering basic characteristics according to rs485 bus-mastering standard,rs485 bus for half-duplex communication bus,its maximum load capacity is 32 payload(including main controller and controlled set) rs485 bus-mastering tran...
Page 39
E linetechnology.Com 37 for this case,we suggest you add one rs485 distributor.It can solved all problem.Avoid production problems and improve communications reliability. Appendix simple trouble shooting table problems possible causes solutions no action, no picture when power is switched power supp...
Page 40
Elinetechnology.Com 38 power supply not sufficient or power cables too long replace ir intelligent high-speed dome out of control abnormal self-check power on again bad contact of control lines remove the host operations have a problem power up the host again the load is too much ,the distance is to...
Page 41
E linetechnology.Com 39 130 21(6) 34(10) 55(16) 139(42) 140 20(6) 32(9) 51(15) 129(39) 150 18(5) 30(9) 47(14) 120(36) 160 17(5) 28(8) 44(13) 113(34) 170 16(4) 26(7) 42(12) 106(32) 180 15(4) 25(7) 39(11) 100(30) 190 14(4) 23(7) 37(11) 95(28) 200 14(4) 22(6) 35(10) 90(27) appendix iv awg sheet at home...
Page 42
Elinetechnology.Com 40 0.710 22 22 0.3958 0.750 21 0.4417 0.800 20 21 0.5027 0.900 19 20 0.6362 1.000 18 19 0.7854 1.250 16 18 1.2266 1.500 15 1.7663 2.000 12 14 3.1420 2.500 4.9080 3.000 7.0683.
Page 43
E linetechnology.Com 41 appendix v address coding table sw2 address setting add 1 2 3 4 5 6 7 8 33 on off off off off on off off 34 off on off off off on off off 35 on on off off off on off off 36 off off on off off on off off 37 on off on off off on off off 38 off on on off ...
Page 44
Elinetechnology.Com 42 sw2 address setting （ continued ） add 1 2 3 4 5 6 7 8 97 on off off off off on on off 98 off on off off off on on off 99 on on off off off on on off 100 off off on off off on on off 101 on off on off off on on off 102 off on on off off on on off 103 on on on o...
Page 45
E linetechnology.Com 43 sw2 address setting （ continued ） add 1 2 3 4 5 6 7 8 161 on off off off off on off on 162 off on off off off on off on 163 on on off off off on off on 164 off off on off off on off on 165 on off on off off on off on 166 off on on off off on off on 167 on ...
Page 46
Elinetechnology.Com 44 sw2 address setting （ continued ） add 1 2 3 4 5 6 7 8 225 on off off off off on on on 226 off on off off off on on on 227 on on off off off on on on 228 off off on off off on on on 229 on off on off off on on on 230 off on on off off on on on 231 on on on off off...