E-Lins H888-C Mini User Manual - page 4
H888-C Series 3G WiFi Hotspot Usermanual
E‐Lins Technology Co.,Limited
Add: #301,Unit 6, Building A,Minkang Garden, Minkang Rd.,Minzhi, Longhua,Shenzhen,518109, China
Tel: +86‐755‐29230581 83700465 E‐mail: sales@szelins.com www.szelins.com www.e‐lins.com
If you could not surf, Please do following operations
Step1) Open a browser and enter http://192.168.169.1 at address bar
Step2) Enter login credential with password as “admin”
Step3) Click internet>WAN Network Make sure that the 3G mode is being selected in WAN Connection Type>Select
Auto Apn> Apply#3
4.2 Connect via ADSL Modem
Before you begin please make sure you have below items prepared
1. H888-C router
2. ADSL Modem with telephone line connect at RJ11
RJ45 Cable (use existing RJ45 cable from modem)
Installation Steps
Step1) Connect LAN port of ADSL Modem and WAN/LAN port of H888-C by R145 cable
Step2) Turn on the power of ADSL Modem and supply power to H888-C
Step3) Make the computer connect the Wi-Fi SSID of AIS (see 4. Computer setting
Step4) Open a browser, login with password “admin”, then input relevant ADSL login credential (ID and password) in
the pop up menu
Step5) then you could surf
If you could not surf , Please do following operations
Step1) Open a browser and enter http://192.168.169.1 at address bar.
Step2) enter login credential with password as ”admin”
Step3) Click Internet> WAN Network. Make sure that the PPPOE(ADSL)
Is being selected in WAN Connection Type
Step4) Please make sure the User Name and Password are correct
4.3 Connect via Cable/DHCP Modem
Before you begin, please make sure you have below items prepared:
1. H888-C Router
2. Switch or Router with internet access ready(e.g.: existing office LAN, hotel LAN, etc., which has internet facility
ready)