E-MOTO ELECTRIC BICYCLE User Manual - The Dash:
The battery level meter, or “dash”,
is located on the left side of the
handlebars. When the battery is
switched on, a series of red LED
lights come on to indicate the
battery’s status and that the bike is
ready to ride.
The dash also features two additional
functions. First, the “Power” button
serves as an additional on/off switch
for turning off the power assist on-
the-fly. While in storage, the bicycle
should be turned off at the battery.
Second, the “Mode” button on the
dash controls two different levels of
power assist. In normal mode, the
VPAC system provides assistance at
speeds up to 10-mph, after which
the bicycle relies on human power.
Pressing the Mode button until the
“Hi” light is illuminated provides
additional assistance until 15-mph is
reached.
Some models may be equipped with
an additional button for a headlight
system. If your e-Moto electric
bicycle came from the factory with a
lighting system, this switch controls
it. If you bicycle lacks factory installed
lighting-- this switch performs no
function.
If the battery level LED’s do not
•
light when the bike is powered
on, verify that the battery is
charged and correctly installed.
If the LED’s are flashing, power
•
assist will not be available. To
reset the system, turn off the
battery for 30-seconds and then
switch back on. If the system
does not reset, bring your bicycle
to an authorized e-Moto service
center for repair.
If storing your e-Moto bicycle, be
•
sure to turn off the system at the
battery.
The Dash:
Mode
Light
Light
Power
Empty
Full
Hi
7