M280 reference guide revision d august 2013 2800513-1b.
M280 reference guide 8-21-2013, rev d. Page 1 1. Introduction …………………………………………………..... 2 2. Product specifications ………………………….…………… 3 3. Unpacking m280 …………………………………….………… 4 4. Getting started ………………………………..………………. 4 5. Using m280 ………………………………………..…………… 9 copyright © 2013 e-seek incorporated. All ri...
M280 reference guide 8-21-2013, rev d. Page 2 1. Introduction the e-seek m280 allows for the reading and capture of all electronic data while concurrently providing the ability to scan and capture a complete image of both sides of an id card or license. The m280 reads all data from both the 2 dimens...
M280 reference guide 8-21-2013, rev d. Page 3 figure 1-2. Back & side view 2. Product specifications imager cmos image sensor (272 dpi) barcode reader 2d: pdf417, linear: code 39 & code 128 magnetic reader 3 track magnetic reader(ansi, iso, cdl, aamva) card size iso standard size 2.125" x 3.375" key...
M280 reference guide 8-21-2013, rev d. Page 4 recommended system requirements • more than intel core 2, or amd phenom™ cpu • more than 2 gb memory • usb2.0 high speed • windows xp with service pack 2 or later, windows vista, or windows 7 (32-bit or 64-bit) 3. Unpacking m280 the m280 package includes...
M280 reference guide 8-21-2013, rev d. Page 5 if your system is different than above, please do the following: 4.1 download device driver from the following link: http://www.E-seek.Com/product_m280.Asp save the zip file into your system and open it. You will see 3 different folders. • w2k -> windows...
M280 reference guide 8-21-2013, rev d. Page 6 select update driver figure 4-3. Update driver select “browse my computer for driver software” figure 4-4. Driver software.
M280 reference guide 8-21-2013, rev d. Page 7 select appropriate device driver from zip file downloaded from website. Figure 4-5. Select device driver successfully updated m280 driver. Figure 4-6. Driver updated.
M280 reference guide 8-21-2013, rev d. Page 8 4.3 check for proper installation go to: start > control panel > device manager. Select and open universal serial bus control, right click on m280 usb driver and select properties. You will see “this device is working properly“. Figure 4-7. Device workin...
M280 reference guide 8-21-2013, rev d. Page 9 5. Using m280 led indicator the m280 incorporates three led indicators. These leds are assigned to the following functions: 1.1 scan status led this led indicates barcode scanner status. Red color means barcode scanner or magnetic stripe reader is in use...
