E.T. Systems ET-500 12V User Manual - Normal Use
3
REMOTE CONTROL FEATURES
Full open - Momentarily press and release the button on your remote
transmitter that has been setup for full opening.
Pedestrian opening/partial open- Momentarily press and release the
button on your remote transmitter that has been setup for pedestrian
access.
Autoclose override- (Not available in Condominium/Loop mode) When
the gate reaches the full open position, press and hold the full opening
button on your transmitter until the buzzer beeps confirmation. To re-
instate the autoclose momentarily press and release the full opening
button.
Holiday lockout- (Not available in Condominium/Loop mode) With the
gate in the full closed position press and hold the pedestrian button of
the remote until buzzer beeps. This will lock out any opening inputs
including the test button on the board. The buzzer will beep when
attempting to operate the motor when locked. To re-instate normal
operation press and hold the pedestrian button untilthe buzzer starts 5
long beeps to indicate unlocking.
HOW DO I RELEASE THE MOTOR TO USE MY GATE MANUALLY?
The manual release in the open position also deactivates the electronic
control. To operate the unit normally the release door must be fully
closed.
Remember to gently push or pull the gate until the gearbox re-engages
before running the motor. The gears will lightly click into place.
Locked
and engaged
Insert key and turn
clockwise
Pull door to release