Summary of VPPH01
Page 1
Professional voip phone vpph01 user manual.
Page 2
E-tech vpph01 manual 2 table of contents page 1.0 introduction 3 2.0 functions and features 3 2.1 standard and protocol 4 2.2 function keys 4 3.0 installation 4 4.0 configuration 5 4.1 phone keypad set 5 4.2 configured by web 6 5.0 upgrade your phone 15 6.0 view records 15 7.0 usage of the phone 16.
Page 3
E-tech vpph01 manual 3 1.0 introduction congratulations on your purchase of this high-quality e-tech product! This product has been extensively tested by e- tech’s technical experts. Should you experience any problems with this product, you are covered by a five-year e- tech warranty. Please keep th...
Page 4
E-tech vpph01 manual 4 2.1 standard and protocols • h.323 v4 calling signal protocol • mgcp rfc2705 • sip rfc3261 • net2phone iax2,wp private protocol • ieee 802.3 10base-t/100base-tx rj-45 port • major g.7xx and gsm610 audio codec • audio codec algorithm include g.711a,g.711u,g.723.1(5.3k/6.3k) and...
Page 5
E-tech vpph01 manual 5 4.0 configuration 4.1 phone keypad set (note: default password is 1234.) 1. Function keys introduction : while using keypad and lcd to configure the setting of ip phone, following keys will be used: press key function spk /hand free enter into submenu of the current menu ;ackn...
Page 6
E-tech vpph01 manual 6 save setting and exit setting continually press redial to reach save setting menu. Then please press spk key to confirm the change. When the menu (save, are u sure?) is displayed on the lcd, press spk again to confirm. Once the ip phone restart successfully, the new setting is...
Page 7
E-tech vpph01 manual 7 • network setting iptype: set how ip phone gets relevant network parameters by selecting corresponding item from drop down list. - static ip: select this item to authorize users set ip address, subnet mask and router ip address of ip phone manually. - dhcp: select this item to...
Page 8
E-tech vpph01 manual 8 ppp pin: with pppoe or modem selected in iptype drop down list, please enter the password here. Local ip: with static ip selected in iptype drop down list, please enter ip address of ip phone here. Subnet mask: with static ip selected in iptype drop down list, please enter sub...
Page 9
E-tech vpph01 manual 9 service type: this option is used to accommodate the miscellaneous requirements of the system providers. When ip phone is connected to these systems, please select the corresponding service type. - common: no special requirements - etalk: use etalk prepaid card by selecting th...
Page 10
E-tech vpph01 manual 10 - enable: when the system does not support ip phone working behind the lan, please select this item to search public ip address of the nat device. With this item selected, “nat addr” field will be activated. Besides, port mapping (port forwarding) needs to be properly set up ...
Page 11
E-tech vpph01 manual 11 rtp port: rtp port is the port transferring and receiving voice packets using udp protocol. This is an even number between 1024 and 65535, can’t be the same as “register port”. Local type: with h323 protocol used, this parameter refers to how ip phone authenticate itself to t...
Page 12
E-tech vpph01 manual 12 - hotline: use hotline function by selecting this item. With this item selected, please enter the hotline number into dial number field. Note with 179xx service used, please set as follows: fill call prefix into dial number field, such as 17930; type ;language indicating numb...
Page 13
E-tech vpph01 manual 13 • audio settings: audio type: set audio type of the phone by selecting item from drop down list. The options are g729¯g7231¯g711u¯g711a and auto. “auto” is suggested, since when “auto” is selected, ip phone will negotiate with system about which algorithm to use and be able t...
Page 14
E-tech vpph01 manual 14 upgrade addr: enter ip address or domain name obtained by isp of ftp server supplying updated program here. Nts ip: fill ip address of time server here. Use daylight: enable/disable daylight by checking/unchecking this box. Timezone: select correct time zone in dropdown list....
Page 15
E-tech vpph01 manual 15 upgrade program: click this button to update the program of ip phone. Before updating, please fill ip address of ftp server into upgrade addr field, and then click this button. Then the phone will read the corresponding bin files from the server and then load into the phone. ...
Page 16
E-tech vpph01 manual 16 note the e-tech vpph01 ip phone supports saving 127 entries unanswered call, dialed call and received call ranged from 0-126 at best.When the entries arrives 127, the latest record will cover the first one. The record will be lost when the phone restarts or turned on. 7.0 usa...
Page 17
E-tech vpph01 manual 17 view dialed number click dialed call ¯then you will hear the record of the dialed call. Click vol/+ to turn the number orderly; click vol/- to turn the numbers reservedly. If there is no record, you will hear nothing. When you hear the number you want to dial, please press “#...