1. DL manuals
  2. E-TEN
  3. Handhelds
  4. Glofiish-M700
  5. User Manual

E-TEN Glofiish-M700 User Manual

Manual is about: GPS Pocket PC

Summary of Glofiish-M700

  • Page 1

    G g p p s s p p o o c c k k e e t t p p c c u u s s e e r r m m a a n n u u a a l l.

  • Page 2

    Safety instructions ♥ please read before proceeding. ♥ this product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use. ♥ before you install the sim card, ma...

  • Page 3

    X-1 u u s s e e r r m m a a n n u u a a l l s afety i nstructions ............................................................ 2 w here to f ind i nformation ............................................... 2 1 getting started / ..................................................................... 1-...

  • Page 4

    X-2 programs......................................................................... 2-7 system application programs ......................................... 2-9 m-d esk ................................................................................... 2-11 e nter i nformation on y our p ocket pc...

  • Page 5

    X-3 4 using the phone /.................................................................... 4-1 i nstalling and r emoving the sim c ard .......................... 4-2 u sing the p hone ................................................................... 4-4 adjusting the phone volume ...................

  • Page 6

    X-4 5 customize your pocket pc /.................................................. 5-1 a djusting s ettings .............................................................. 5-1 n otifications ........................................................................ 5-2 p ower p reference s ettings .......

  • Page 7

    X-5 u sing b luetooth .................................................................. 7-7 bluetooth connection wizard ......................................... 7-7 bluetooth connection setting.......................................... 7-9 service......................................................

  • Page 8

    X-6 w indows l ive ™ m essenger ............................................... 9-12 setting up........................................................................ 9-13 working with contacts.................................................... 9-14 chatting with contacts.............................

  • Page 9

    X-7 11 companion programs /.......................................................... 11-1 c alendar : s cheduling a ppointments and m eetings ..... 11-2 create an appointment ................................................... 11-3 use the summary screen................................................

  • Page 10

    X-8 synchronize mobile favorites......................................... 11-27 create a mobile favorite......................................... 11-27 save pocket pc memory ........................................ 11-28 12 maintaining the pocket pc / ...................................................

  • Page 11

    X-9 13 voice commander / ................................................................ 13-1 s tarting v oice c ommander ............................................... 13-2 v oice c ommand f ormat ..................................................... 13-3 v oice c ommander s ettings ................

  • Page 12

    X-10

  • Page 13

    Getting started 1-1 1 1 g g e e t t t t i i n n g g s s t t a a r r t t e e d d / / package content pocket pc, stylus, battery, getting started cd, user guide, ac adapter, usb cable, headset and leather case. N pocket pc o stylus p battery q getting started cd r user guide s usb cable t ac adapter n...

  • Page 14

    1-2 external views 1 volume control key 2 voice commander 3 earphone and microphone jack 4 wlan active led (orange) bluetooth active led (blue, blinks once) gps active led (blue, blinks twice) 5 cell phone speaker 6 power charging led (red) cell phone active led (green) 7 hot key reserved for gps ap...

  • Page 15

    Getting started 1-3 qwerty keyboard close open.

  • Page 16

    1-4 hardware hotkey functions hardware button short press (press once and release) long press (press for a few seconds and release) m adjust volume zoom in/out during camera mode -- n connect to voice commander connect to notes o hot key reserved for gps ap -- p connect to m-desk -- q left soft-key:...

  • Page 17

    Getting started 1-5 rear side 1 insert the sim card into the sim card slot with its golden contacts facing down. Follow the picture indicated on the pocket pc. 2 main battery 3 back cover 4 follow the direction in the illustration to install the main battery. 5 main battery lock installing the sim c...

  • Page 18

    1-6 using the pocket pc for the first time charging power and power supply n connect the ac adapter plug to any household power outlet. O connect the other plug from the ac adapter to the usb port. The pocket pc starts to charge automatically. P if you need to connect pocket pc and desktop computer,...

  • Page 19

    Getting started 1-7 3. Please connect one side of the ac adapter plug to any household power outlet and connect the other side of plug from the ac adapter to the usb port. The pocket pc will start to charge automatically. 4. Cold boot: press and hold the “power button” with one hand, and use the sty...

  • Page 20

    1-8 re-installation or replacing the battery if the phone, gprs or wireless lan connection function is already activated, deactivate it first and then replace the battery. 1. Slide and remove the back cover of pocket pc. 2. You may poke down to unlock the main battery lock in order to remove the bat...

  • Page 21

    Getting started 1-9 power on and off sleep mode 1. Press the “power button” of the pocket pc to enter the sleep mode. At this time, the screen is turned off and all peripheral devices enter the power-saving mode. But if the phone is turned on, it is still in the call waiting mode. 2. To turn on the ...

  • Page 22

    1-10 turn on the screen this product is designed with a power-saving feature. If the screen is turned off, press the “power button” of the pocket pc to turn it on. If the screen is too dark and you cannot see clearly, set the proper brightness level for the backlight. Tap , settings, the system tab,...

  • Page 23

    Getting started 1-11 restarting the pocket pc appropriate situation: if the pocket pc is unable to maintain normal operation, has no response, or if the screen is frozen. For your consideration, factoring into your safety and convenience, please refer to the following instructions in order: 1. Reset...

  • Page 24

    1-12 reset v reset method: press the “reset button” of pocket pc with the tip of the stylus. V appropriate situation: if the pocket pc is unable to maintain normal operation, has no response, or if the screen is frozen. V result: in a moment, when pocket pc automatically completes the system startup...

  • Page 25

    Getting started 1-13 default settings tap , programs, utilities, and then default settings. 1. If this application is inadvertently accessed, please select the to the upper right of the screen to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, pleas...

  • Page 26

    1-14 clean boot v cold boot method: hold the “power button” of the pocket pc with one hand while holding the stylus tip to push in the “reset button” with the other. Simultaneously release both the “power button” and “reset button”. V appropriate situation: if a previous reset has already been attem...

  • Page 27

    Getting started 1-15 perform cold boot and hold the end button . Please refer to the following instructions before careful consideration. Á erase all data and load default? The default is “no.” if yes or no was not selected, after a few seconds the system will automatically execute the default no. I...

  • Page 28

    1-16.

  • Page 29

    Using the pocket pc 2-1 2 2 u u s s i i n n g g t t h h e e p p o o c c k k e e t t p p c c / / start screen tap , settings, the system tab, and then screen. The first time you use or cold boot the pocket pc, the system will ask you to align the screen. Kindly continue to tap the center of each cros...

  • Page 30

    2-2 the following steps will bring you into the touch screen calibration mode. These steps provide a faster and more efficacious way to enter the touch screen calibration mode. And they also provide a method of getting into screen program for when the touch screen dislocation is so severe that you c...

  • Page 31

    Using the pocket pc 2-3 today screen when you turn on your pocket pc for the first time each day (or after 4 hours of inactivity), you will see the “today screen”. You can also display it by tapping and then today. On the “today screen”, you can see at a glance the important information for the day....

  • Page 32

    2-4 the following table lists the icons that you may see on the navigation bar or the command bar. Kindly refer to the “meaning” column for explanation or tap on the icon to access the instant message. Icon meaning (located on the navigation bar at the top of the screen) speaker is on ringer off pen...

  • Page 33

    Using the pocket pc 2-5 icon meaning (located on the navigation bar at the top of the screen) radio connected no signal. No service. The device has not yet connected to a network. Lost signal. The device is searching for a signal. Missed call voice call in progress data call in progress calls are fo...

  • Page 34

    2-6 icon meaning (located on the command bar at the bottom of the screen) general mode. Set the scenario suitable for each environment. Meeting mode. Set the scenario suitable for each environment. Outdoor mode. Set the scenario suitable for each environment. Silent mode. Set the scenario suitable f...

  • Page 35

    Using the pocket pc 2-7 programs you can switch from one program to another by selecting it from the menu. (you can customize which programs you see on this menu. For information, see “adjusting settings” section.) to access some programs, you’ll need to tap , programs, and then the program name. Ic...

  • Page 36

    2-8 icon programs description notes create handwritten or typed notes, drawings, and recordings. Tasks keep track of your tasks. Messaging send and receive e-mail messages. Internet explorer browse web and wap sites, and download new programs and files from the internet. Windows live msn related pro...

  • Page 37

    Using the pocket pc 2-9 system application programs , settings, the personal tab program description buttons set the hot key for pocket pc hardware button. Input set the details about the input method. Lock set the access rights and password of pocket pc. Menus set the items displaying on the start ...

  • Page 38

    2-10 , settings, the system tab program description about display the important information about the pocket pc. Backlight set the details about the backlight and brightness. Certificates for network identification to prevent unauthorized access. Clock & alarms set the time and alarms. Memory view t...

  • Page 39

    Using the pocket pc 2-11 m-desk press the hot key on the upper part of the pocket pc to link to m-desk. Tap , programs, utilities, and then m-desk. You can categorize programs or even change the background picture on the panel according to your personal preferences. Categorizing, renaming, deleting ...

  • Page 40

    2-12 Á system category screen n this category already has these programs that are automatically selected by the system which you cannot move or delete. All relevant information is updated automatically. O if no storage card is installed, its icon changes to gray and will be marked with a red x . P c...

  • Page 41

    Using the pocket pc 2-13 Á choose style screen n exit choose style screen. O viewing area. P view the previous or next picture. Q tap options and then classify config to enter the categories setup screen. O n q p.

  • Page 42

    2-14 enter information on your pocket pc you have several options for entering new information: 1. Use the input panel to enter typed text, either by using the soft keyboard or other input method. 2. Write directly on the screen. 3. Draw pictures on the screen. 4. Speak into your pocket pc microphon...

  • Page 43

    Using the pocket pc 2-15 using qwerty keyboard the keyboard layout of this product is standard us keyboard (as used on pcs). The keyboard is located underneath the screen of the pocket pc. You can slide the display to access the keyboard. The screen automatically switches to landscape display at the...

  • Page 44

    2-16 standard keyboard functions operation lower case of letters you can input data in the lower case when no function key is activated. Upper case of letters 1. If you want to input the upper case of a letter, press and then release key, the first letter you input will be in upper case, while the r...

  • Page 45

    Using the pocket pc 2-17 standard keyboard functions operation tab press . Latin 1 letters input a letter and press and keys at the same time. The system will convert the letter into the corresponding latin 1 letters. Press both keys continually until the desired letter appear on the screen. Release...

  • Page 46

    2-18 enter text using the input panel use the input panel to enter information in any program on your pocket pc. You can either type using the soft keyboard or write using letter recognizer, block recognizer, or transcriber. In either case, the characters appear as typed text on the screen. To show ...

  • Page 47

    Using the pocket pc 2-19 when you use the input panel, your pocket pc anticipates the word you are typing or writing and displays it above the input panel. When you tap the displayed word, it is inserted into your text at the insertion point. The more you use your pocket pc, the more words it learns...

  • Page 48

    2-20 type with the soft keyboard 1. Tap the arrow next to the input panel button and then keyboard. 2. On the soft keyboard that is displayed, tap the keys with your stylus. Use letter recognizer with letter recognizer you can write letters using the stylus just as you would on paper. 1. Tap the arr...

  • Page 49

    Using the pocket pc 2-21 use transcriber with transcriber you can write anywhere on the screen using the stylus just as you would on paper. Unlike letter recognizer and block recognizer, you can write a sentence or more of information. Then, pause and let transcriber change the written characters to...

  • Page 50

    2-22 write on the screen in any program that accepts writing, such as the notes program, and in the notes tab in calendar, contacts, and tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you’ve written and convert the informat...

  • Page 51

    Using the pocket pc 2-23 select writing if you want to edit or format writing, you must select it first. 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Without lifting, drag the stylus across the text you want to select. If you accidentally write...

  • Page 52

    2-24 draw on the screen you can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot. Create a drawing cross th...

  • Page 53

    Using the pocket pc 2-25 select a drawing if you want to edit or format a drawing, you must select it first. Tap and hold the stylus on the drawing until the selection handle appears. To select multiple drawings, tapping menu and then draw to deselect it and then drag to select the drawings you want...

  • Page 54

    2-26 create a recording 1. Hold your pocket pc’s microphone near your mouth or other source of sound. 2. Press and hold the record hardware button on your pocket pc until you hear a beep. 3. While holding down the record button, make your recording. 4. To stop recording, release the record button. T...

  • Page 55

    Using the pocket pc 2-27 voice commander by default, the system sets the button on the side of the pocket pc as the “voice commander button.” press this button to launch the voice commander. For details on how to use this function, please refer to the voice commander section. Voice commander button.

  • Page 56

    2-28.

  • Page 57

    Voice command satellite navigation 3-1 3 3 v v o o i i c c e e c c o o m m m m a a n n d d s s a a t t e e l l l l i i t t e e n n a a v v i i g g a a t t i i o o n n / / navigation device installation n pocket pc o car charger (* optional): when pocket pc is low on power, recharge by connecting one...

  • Page 58

    3-2 gps navigation software installation please follow your car navigation system operating manual’s instructions on software installation in order to use the navigation function. Conditions for using gps car navigation by using this system you are agreeing to the following conditions: 1. When using...

  • Page 59

    Voice command satellite navigation 3-3 2. Please set navigation destination before driving. Do not operate this system while driving. 3. Please use this system with care. If any harm results from careless use of this system, the responsibility for safe driving resides with the driver. 4. Gps positio...

  • Page 60

    3-4 10. When not in use, please do not leave the device inside the car. If exposed directly to sunlight, the battery may overheat and cause damage to this device. This may endanger the vehicle as well..

  • Page 61

    Voice command satellite navigation 3-5 satellite data update tap , programs, gps, and then satellite data update. Login to the provider’s server to download instant satellite data and enable the gps function. Note: either of the following connections allows your pocket pc to download the latest gps ...

  • Page 62

    3-6 Á tap the download button to update the gps data manually. The figure on the left shows how to download using the synchronization connection. Á tap the setting button in the satellite data update main screen to open the dialog in the left figure. N check the expiration checkbox to activate the r...

  • Page 63

    Voice command satellite navigation 3-7 Á when the gps data has expired, the relevant message displays on the top of the screen. N the icon reminds you that your gps data has expired. O tap the notification button to open the message window. P tap to close the message window. O n p.

  • Page 64

    3-8 location sms tap , programs, gps, and then location sms. You can utilize the gps function offered by your pocket pc, to send the matching location automatically found by this program and the necessary message to your contacts. This could be helpful in preventing kidnapping, reporting disastrous ...

  • Page 65

    Voice command satellite navigation 3-9 2. Select in the main screen, once in the screen shown on the left, tap on any message and tap ok button to select. Further, by pressing and holding anywhere on the screen, together with the pop-up menu, you can add, edit or delete your most used messages. 3. T...

  • Page 66

    3-10 gps viewer tap , programs, gps, and then gps viewer. You may use this pocket pc to automatically search the gps coordinates of your location and check if the gps functions work properly. 1. Run this program in a location with good signal reception. N greenwich mean time (gmt): after connecting ...

  • Page 67

    Using the phone 4-1 4 4 u u s s i i n n g g t t h h e e p p h h o o n n e e / / the phone feature on the pocket pc allows you to perform the following tasks: v make and receive calls. V quickly make calls or listen to voice mail without entering phone numbers using contacts, speed dial, or your call...

  • Page 68

    4-2 installing and removing the sim card 1 insert the sim card into the sim card slot with its golden contacts facing down. Follow the picture indicated on the pocket pc. 2 main battery 3 back cover 4 follow the direction in the picture to install the main battery. 5 main battery lock installing the...

  • Page 69

    Using the phone 4-3 1. Tap the all off button in wireless manager to turn off your pocket pc’s mobile phone, bluetooth, and wireless lan functions. 2. Press the “power button” of the pocket pc to turn off the screen. 3. Remove the back cover, unlock the main battery lock and remove the battery. 4. I...

  • Page 70

    4-4 using the phone n microphone o earphone p phone speaker q phone microphone (bottom of pocket pc) combination method operation answer or end a call adjust earphone volume hold the pocket pc manually for calls hold the pocket pc and position the speaker close to your ear and the microphone close t...

  • Page 71

    Using the phone 4-5 adjusting the phone volume tap on the top and adjust all programs’ sound functions under . Adjust the phone sound volume under . 1. When there is no call, you can push the volume control key on the side of the pocket pc or use the stylus to tap the speaker icon tap and then to ad...

  • Page 72

    4-6 turning the phone on or off and making calls n adjust earphone volume o rear side: the sim card is located below the battery. P send button q end button 1. Open the pocket pc back cover and remove the main battery. 2. Install the sim card properly. As shown in the direction on the pocket pc, pay...

  • Page 73

    Using the phone 4-7 the following table shows the icons that you may see on the navigation bar on the top of the screen. Signal indicator description sim card unavailable. The phone is turned off. To turn it on, tap this icon. Network is searching or unavailable. Phone connection unavailable or netw...

  • Page 74

    4-8 toolbar n smart dialing: enter the portion you remember and the system will use the fuzzy comparison method to list the matching contacts at area o on the figure. Please refer to the keyboard shown on the screen to enter information including the phone number and letters. O tap a contact to view...

  • Page 75

    Using the phone 4-9 call from contacts phone numbers entered in contacts can be used to quickly locate phone numbers and make calls. 1. In the contact list, tap and hold the contact to display a pop-up menu. 2. Tap call mobile or call work on the pop-up menu. 3. Tap a contact to display the details....

  • Page 76

    4-10 call from the call history tap call history button on the phone screen to enter the following screen. N tap menu and then filter to list the categories. To search, tap by caller and follow the screen instructions to complete the operation. O tap this icon to redial this number immediately. P ta...

  • Page 77

    Using the phone 4-11 customize your phone tap menu, options, and then the phone, services, network, skin, appreciation software or others tabs to modify the relevant service setup. Note that the setup values you can change here depend on the services provided by your telephone company. Tap the appre...

  • Page 78

    4-12 tap menu, options, and then the phone tab. N you can set the ring type as ring, vibration or mute. O if you want to use a customized ring tone file, use the synchronization program on your desktop computer to copy the .Wav ring tone file to the /windows/rings folder on the pocket pc. You can th...

  • Page 79

    Using the phone 4-13 phone application programs caution! Before you can use the functions described in the phone group. Make sure that the sim card is properly installed in your pocket pc and the phone is already turned on. Sim manager if your pocket pc does not include this function, it means it is...

  • Page 80

    4-14 the following are the shared functions for standard screen or fullscreen display: s menu button: provides the appropriate function table. Sms management: enter the sms management screen. New sim contact: add a new phonebook entry to the sim card. Refresh: tap to refresh the displayed contacts a...

  • Page 81

    Using the phone 4-15 copy phonebook information the function descriptions of this section are for standard screen and fullscreen display. Copying phonebook information between the sim card and contacts is either by “select one, select multiple, or select all” methods. For precise management of your ...

  • Page 82

    4-16 sms management tap menu and then sms management to enter the sms management screen and to display the original sms contents on the sim card. N double tap the number in the pos. Column to view the corresponding sms contents. O tap the sms you want to delete. When it is highlighted, tap del selec...

  • Page 83

    Using the phone 4-17 sms sender tap , programs, phone, and then sms sender. Tap , messaging, and then new. Press to bring up the phone screen. Tap menu and then send text message. Enter the composing sms screen in messaging. N “text messages” means you are editing sms. O input the mobile phone numbe...

  • Page 84

    4-18 speed dial tap , programs, phone, and then speed dial. Hot key switch n tap the box according to the functions provided by the system. O tap to switch between these functions: frequency dial → index dial. P tools button: provides the relevant menu. For example, select settings to set the interf...

  • Page 85

    Using the phone 4-19 frequently dialed screen Á frequency dial screen n tap any phone entry box to speed dial. O tap and hold the box, then select appropriate command from the pop-up menu. P sort according to the number of calls in descending order. The upper left corner has the most number of calls...

  • Page 86

    4-20 index dial Á index dial screen n tap on any letters. The content displayed are the data created in contacts. If you did not create any data in contacts, the screen is blank. O switch to the index dial screen as shown on the left. N the letter “f” appears on the upper left side of the screen (se...

  • Page 87

    Using the phone 4-21 call filter tap , programs, phone, and then call filter. N tap add new list button to add a new block list. O tap and hold an entry in the list. Select from the pop-up menu to manage the list according to your needs. P tap add new list to add a new allow list. Tap and hold any e...

  • Page 88

    4-22 Á tap add new list button in the call filter screen to enter the screen shown on the left. N input name and telephone number. O add to block list or allow list. P ok button q cancel button tap and hold a contact in the contacts screen. Select add to call filter from the pop-up menu to add a new...

  • Page 89

    Using the phone 4-23 tap the icon or on the lower right of the today screen to display the call filter status window. Á display call filter setting status. N tap to hide the call filter status window. N.

  • Page 90

    4-24.

  • Page 91

    Customize your pocket pc 5-1 5 5 c c u u s s t t o o m m i i z z e e y y o o u u r r p p o o c c k k e e t t p p c c / / you can adjust the pocket pc settings according to your personal preferences and install other programs. Adjusting settings to see available options, tap , settings, then the pers...

  • Page 92

    5-2 notifications your pocket pc reminds you in a variety of ways when you have something to do. For example, if you’ve set up an appointment in calendar, a task with a due date in tasks, or an alarm in clock & alarms, you’ll be notified in any of the following ways: v a message box appears on the s...

  • Page 93

    Customize your pocket pc 5-3 power preference settings tap , settings, the system tab, and then power. View the power usage condition or perform the relevant power management settings. N power icon o check this item, so that when you accidentally press the hardware buttons on the pocket pc, the pock...

  • Page 94

    5-4 backlight tap , settings, the system tab, and then backlight. 1. Battery power or external power tab: set the relevant backlight functions. 2. Backlight level tab: adjust the backlight level..

  • Page 95

    Customize your pocket pc 5-5 microphone profile microphone cause * voice commander voice control turn the volume down and find the proper volume setting for better recognition of system. Surrounding interference recorded when volume up. Speech recording turn the volume up. More distance from the lec...

  • Page 96

    5-6 adjust volume push the volume control key on the side of the pocket pc. Or use the stylus to tap the icon on the top of the screen to adjust all program sound functions under . Adjust the phone volume under . 1. Adjust volume: when set to € on, use the stylus to tap and drag the slider up and do...

  • Page 97

    Customize your pocket pc 5-7 scenarios tap , programs, phone, and then scenarios. Á you can tap any scenarios icon in the today screen to enter scenarios. After selecting a mode, this will become the scenarios icon you selected. N check this item to activate scenarios. O select an applicable mode. P...

  • Page 98

    5-8 quick link tap , settings, the personal tab, today, the items tab, and then check quick link. N items tab: enter the today setting screen with quick link options. O make sure that quick link is checked so that the today screen can display this item. P options button: check and select quick link ...

  • Page 99

    Customize your pocket pc 5-9 Á tap the advanced tab to enter the screen shown on the left. N set to enable or disable the use of the big icon. O tap on arrowhead to select the number of lines for displaying quick link. P the icons of the programs you checked in the general tab are displayed in this ...

  • Page 100

    5-10 find and organize information the search feature on your pocket pc helps you quickly locate information. 1. Tap , programs, and then search. Input the text you want to find and then select the data type. Tap on search to start the search. 2. To find information that occupies a larger space, sel...

  • Page 101

    Customize your pocket pc 5-11 navigation bar and command bar the navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. ...

  • Page 102

    5-12 pop-up menus with pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program....

  • Page 103

    Customize your pocket pc 5-13 redefine hot keys tap , settings, the personal tab, and then buttons. These hot keys can be redefined as launch keys for frequently used programs. V end button and send button are exclusive phone functions so they cannot be redefined. P q o n.

  • Page 104

    5-14.

  • Page 105

    Synchronization 6-1 6 6 s s y y n n c c h h r r o o n n i i z z a a t t i i o o n n / / windows vista part a pc with windows vista™ operating system can be used to enable connection and synchronize with your pocket pc. The windows mobile ® device center application can be used to manage your pocket ...

  • Page 106

    6-2 2. Hardware installation: the usb cable is a plug-and-play device. Use the usb cable to connect your pocket pc to your personal computer. 3. Using windows mobile ® device center n after installation is complete, the setup wizard helps you customize your synchronization settings. O once you use t...

  • Page 107

    Synchronization 6-3 windows xp/2000/98 part a pc with windows xp/2000/98 operating system can be used to enable connection and synchronize with your pocket pc. Using microsoft ® activesync ® , you can synchronize the information on your desktop computer with the information on your device. Synchroni...

  • Page 108

    6-4 installing and using activesync important installation notice before you install activesync, make sure that the usb cable on the pocket pc is not connected to the personal computer. Connect the usb cable only after activesync is installed. 1. Installing activesync: you could use the getting star...

  • Page 109

    Synchronization 6-5 3. Using activesync n after installation is complete, the activesync setup wizard helps you customize your synchronization settings. O once you use the usb cable to connect the two devices properly, the set up a partnership screen appears on the personal computer. Set it up accor...

  • Page 110

    6-6 faq about synchronization tap , settings, the connections tab, and then usb to pc. 1. Factory setting defaults to checking the box. 2. If you have followed the above installation and operation procedures and find that the connection between your pocket pc and desktop pc still cannot be establish...

  • Page 111

    Synchronization 6-7 activesync synchronization settings: 1. After installation is complete, the setup wizard will continue to guide you. Adjust the specifications according to your actual needs. 2. Use the usb cable to connect the two devices properly and the set up a partnership screen appears on t...

  • Page 112

    6-8 r click finish. S after installation is complete, the activesync setup wizard helps you connect your pocket pc to your desktop computer, set up a partnership so you can synchronize information between your pocket pc and your desktop computer, and customize your synchronization settings. Your fir...

  • Page 113

    Synchronization 6-9 synchronization tool on pocket pc once you have set up activesync and completed the first synchronization process, you can initiate synchronization from your pocket pc. To switch to activesync on your pocket pc, tap , and then tap activesync. For more information on how to use ac...

  • Page 114

    6-10 synchronizing using bluetooth without using the usb cable to connect the two devices, you can still synchronize using bluetooth. The greatest advantage is that you don’t have to plug in and detach from the usb cable so often. This is especially useful for managing several pocket pcs. For detail...

  • Page 115

    Connections 7-1 7 7 c c o o n n n n e e c c t t i i o o n n s s / / connecting to the internet this section teaches you how to use gprs wireless network connection. Gprs wireless networking is a convenient function for working at home or while traveling. You can use the pocket pc to browse websites ...

  • Page 116

    7-2 tap , settings, the connections tab, and then connection wizard. 1. Select the country name from the list. 2. Select the carrier name from the list. 3. According to actual requirements, select the carrier name, and then tap add button or edit button. Or use the new button to add the new network ...

  • Page 117

    Connections 7-3 setting the gprs connection tap , settings, the connections tab, connections, and then the tasks tab. 1. As shown in the screen on the left tap “add a new modem connection.” 2. Enter the “make new connection” screen as shown in the screen on the left. N input a new connection name fo...

  • Page 118

    7-4 3. Input the access point name provided by your telecom company and tap next. 4. Input your personal information such as account number, and tap finish..

  • Page 119

    Connections 7-5 starting gprs connection 1. Tap the or icon at the top of the screen and when a message window appears tap “turn off flight mode” and input your pin to turn on the phone. The icon will change to while the icon changes to . 2. Tap , then tap settings to link to connections. You are re...

  • Page 120

    7-6 disconnecting gprs 1. Disconnect gprs: tap and the message window appears. Tap disconnect. 2. Turn off phone: tap and the message window appears. Tap “turn on flight mode.”.

  • Page 121

    Connections 7-7 using bluetooth bluetooth is a short-distance wireless communication technology with an effective range under 10 meters (30 feet). When you enable bluetooth function, the blue led blinks once every 4 seconds. Bluetooth connection wizard tap , programs, utilities, and then bluetooth m...

  • Page 122

    7-8 Á all nearby bluetooth devices found by the system. N tap on any one of the shortcut icons and you will be able to follow the on-screen instructions to pair with that particular device. Devices that have already been paired with are shown with a 9 . O tap on one of the icons which represent a bl...

  • Page 123

    Connections 7-9 bluetooth connection setting tap settings button in the bluetooth wizard screen to display the bluetooth settings screen. Tap the general tab 1. Bluetooth status n tap open to enable bluetooth function. O tap close to disable bluetooth function. Make sure that you disable bluetooth f...

  • Page 124

    7-10 service tap the service tab provide the settings about services of serial port, file transport and exchange vcard..

  • Page 125

    Connections 7-11 serial port if you have bluetooth gps software, use the product as instructed and refer to the accompanied documentation and this section to register your pocket pc as an effective serial port or search for other serial ports. Tap the serial port tab register new serial port 1. Tap ...

  • Page 126

    7-12 bluetooth headset tap the bluetooth headset tab 1. Select a headset from the paired list. 2. Check “use headset.” ftp sharing tap the ftp tab specify one of the folders on your pocket pc as a shared directory..

  • Page 127

    Connections 7-13 csd type tap , settings, the connections tab, and then csd type. You must first apply for circuit-switched data (csd) service from your telecom company before you can use this function. In short, this function is similar to the modem dial-up in a personal computer. By simulating the...

  • Page 128

    7-14 connecting with a personal computer for more information, refer to “synchronization” section. Wireless lan transmission tap the wireless manager icon on the lower right corner of the today screen. For more information, refer to “using wireless lan” section. Wireless lan led indicator (orange) t...

  • Page 129

    Using wireless lan 8-1 8 8 u u s s i i n n g g w w i i r r e e l l e e s s s s l l a a n n / / connecting to wireless lan this section teaches you how to use the pocket pc’s built-in wireless lan function to connect to the internet. It is convenient for you to browse websites and send/receive e-mail...

  • Page 130

    8-2 select the icon on the bottom right of the today screen. Tap , programs and then wireless manager. N this icon will show up on your screen whenever your pocket pc has detected a usable wireless network and has connected to that network, indicating that your pocket pc has successfully connected t...

  • Page 131

    Using wireless lan 8-3 configure your wireless network wlan setup scenarios location select networks proxy connection network key or access point home , settings, the connections tab, connections, the advanced tab, select networks button, and then select my work network from “programs that automatic...

  • Page 132

    8-4 configure your wireless network (reference for a normal network setup) you will need a correct ip address, dns name server address, proxy server, and connection port number to setup your connection. If you have purchased a wireless internet service account, then the service desk at the location ...

  • Page 133

    Using wireless lan 8-5 4. As shown on the left, make sure that my work network is selected for both items, and finally tap to save and exit. My work network is the wlan connection method. As this option is from a choice of two, the next time you need to use the gprs connection, you will have to refe...

  • Page 134

    8-6 7. Select name of a currently available network to enter the wlan authorization setup screen. 8. Set accordingly to the rules and information provided by the hotspot location. N authentication: select open o data encryption: select wep to enable the entry bar about network key p network key q ne...

  • Page 135

    Using wireless lan 8-7 configure your wireless network (reference for proxy setup) to successfully configure your network, you will need the following information: a correct ip address, dns name server address, proxy server, and connection port number, etc. Please obtain the above listed information...

  • Page 136

    8-8 the above is applicable to an office environment that requires a proxy setup. For others that close the proxy connection, please do not check the box named “this network connects to the internet” and skip the following procedures. 3. Enter the name into the “proxy server” field. 4. Select the ad...

  • Page 137

    Sending and receiving messages 9-1 9 9 s s e e n n d d i i n n g g a a n n d d r r e e c c e e i i v v i i n n g g m m e e s s s s a a g g e e s s / / tap and then messaging. N tap to select an account. O tap to setup a new e-mail account. P tap to select the highlighted account above. Q change the ...

  • Page 138

    9-2 e-mails and sms messages refer to “connecting to the internet” section to learn how to connect the pocket pc to the internet and start using messaging to send and receive e-mails and sms messages. This section explains the basic preparations and processing principles. If you have any questions, ...

  • Page 139

    Sending and receiving messages 9-3 synchronizing e-mail messages if you want to synchronize e-mails with company or home usage, please refer to this section. E-mail messages can be synchronized as part of the general synchronization process. You will need to enable inbox synchronization in synchroni...

  • Page 140

    9-4 connecting directly to the mail server for single-machine use, not combining office and home e-mails, please refer to “e-mail server setup” section. You will receive messages directly from the mail server. This is irrelevant to personal computer use. You can work online or offline. When working ...

  • Page 141

    Sending and receiving messages 9-5 e-mail server setup refer to this section if you are preparing for single-machine use and not combining office and home e-mails. If you already have an e-mail account from your isp or company network, you can use messaging to send and receive mails and messages. To...

  • Page 142

    9-6 3. Select “other” for the e-mail source. 4. Select “other (pop/imap)” for the e-mail provider. 5. Follow the instructions on the screens to setup the e-mail account. 6. Refer to “connecting to the internet” section or “using wireless lan” section to connect the pocket pc to the internet and you ...

  • Page 143

    Sending and receiving messages 9-7 using e-mails and sms below is a brief description of the messaging screen functions: n select the service and folder you want to display. O select the sort order for messages. P tap to open a message. Q tap and hold to display a pop-up menu of actions. R status ba...

  • Page 144

    9-8 brief description on writing, sending, reading and replying (to) mail: 1. Send and receive mail: tap menu and then new to compose a message and then tap send to send it. N tap to, cc or bcc to open the contacts screen. As long as you have set up contacts beforehand, you can just tap to select. O...

  • Page 145

    Sending and receiving messages 9-9 2. Read and reply: receive new mails by tapping menu and then send/receive. Switch to the “inbox” folder and tap to open. The following figure shows the open mail screen. Besides reading the messages, provide frequently-used functions for replying to or forwarding....

  • Page 146

    9-10 direct push technology alert the direct push technology alert function will enable you as a corporate user to never miss another e-mail, using the pocket pc for the best business service. Through the activesync feature, your pocket pc can instantly and automatically receive important e-mails fr...

  • Page 147

    Sending and receiving messages 9-11 2. Obtain the server address, user name, network etc. From the company network administrator to successfully setup the server data. 3. Tap menu and then schedule. The peak times and off-peak times provide a as items arrive option, this is the direct push technolog...

  • Page 148

    9-12 windows live™ messenger to switch to windows live™ messenger, tap , programs, and then tap windows live™ messenger. Windows live™ messenger on your pocket pc is an instant messaging program that lets you: v see who is online. V send and receive instant messages. V have instant message conversat...

  • Page 149

    Sending and receiving messages 9-13 setting up the first time you use: tap , programs, and then windows live™ messenger. On the today screen, tap messenger to display the windows live™ messenger sign-in screen. Before you can connect, you must enter passport or exchange account information. 1. Tap m...

  • Page 150

    9-14 working with contacts if you already use windows live™ messenger on your desktop computer, your contacts will show up on your pocket pc without being added again. The windows live™ messenger window shows all of your messenger contacts at a glance, divided into online and offline categories, or ...

  • Page 151

    Sending and receiving messages 9-15 chatting with contacts tap a contact name to open a chat window. N view full chat. O enter your message in the text entry area, and tap send. P return to the contacts list, and select a contact to chat with. Q the contact you are chatting with. \ provides the rele...

  • Page 152

    9-16 mms message tap , messaging, and then mms. Tap , programs, phone, and then mms message. The mms message mailbox is very similar to ordinary e-mail mailbox function. “inbox” saves the mms that you received while “outbox” saves the mms that you are going to send. “sent” saves a backup copy of the...

  • Page 153

    Sending and receiving messages 9-17 2. Tap menu and then new to add a new mms. N tap to change the mms sort method. O select the folder types you want to display in the list. P tap to manage your mms mailbox. Q provides the relevant menu. 3. The mms template displays. You can edit freely. N tap to b...

  • Page 154

    9-18 birthday reminder tap , programs, utilities, and then birthday reminder. Combines contacts and this application, you may store birthdays and anniversary dates in the contacts card first. When the day comes, a message will remind you to send a sms, mms, make a phone call or send an email to him/...

  • Page 155

    Sending and receiving messages 9-19 3. For setting the corresponding features, you may tap settings on the main screen. N tap the check box to display a popup message for reminding. O the options of reminding methods. Remind you once: at 8:00 a.M. Remind you two times: at 8:00 a.M. And noon. Remind ...

  • Page 156

    9-20 6. Moreover, you may tap the , , or icons on the calendar of main screen. N you may send a sms, mms, make a phone call or send an email to him/her after selected corresponding icons. O select one contact to be the message recipient. P show you that you ever sent greeting messages to this contac...

  • Page 157

    Multimedia 10-1 1 1 0 0 m m u u l l t t i i m m e e d d i i a a / / using camera tap , programs, multimedia, and then camera. 1. To take photos of scenery or of other people, turn the pocket pc so the screen is facing you and when you are satisfied with the composition, press the button on the side ...

  • Page 158

    10-2 camera mode you can use camera to shoot pictures and videos. This section describes the camera tools. N exit camera o camera toolbar p viewfinder q open or close the toolbar r switch between camera and digital video modes n r q o p.

  • Page 159

    Multimedia 10-3 icon meaning photo mode: normal, timer, continuous shutter, portrait activate “timer” to select the fixed time for shooting a picture activate “continuous shutter” to select the number of pictures to be taken choose landscape or portrait enable or disable the flash function display o...

  • Page 160

    10-4 camera mode using wizard tap or to select wizard. After you press the shutter button on the side of the pocket pc, the wizard will guide you through how to link to other programs conveniently. This section explains the wizard tools. N exit camera o photo-viewing area, retains the last photo jus...

  • Page 161

    Multimedia 10-5 managing pictures shot by continuous shutter tap to select “continuous shutter” in the wizard mode. After you press the shutter button, you can preview all thumbnails just shot and delete the unnecessary one. N exit camera o tap the thumbnail that you want to delete p tap on the tool...

  • Page 162

    10-6 digital video mode recording without entering the camera screen: directly press and hold the recorder button for a few seconds and then release to start recording. To finish recording, press the recorder button to stop. Tap , programs, multimedia, and then camera, dv mode. 1. Since only horizon...

  • Page 163

    Multimedia 10-7 icon meaning recording quality. The higher the resolution, the larger the file. Select file format select resolution. The higher the resolution, the larger the file. Select scene enable or disable sound recording select storage path enable or disable wizard select special effect sele...

  • Page 164

    10-8 digital video mode using wizard tap or to select wizard. After you finish recording, the wizard will guide you through how to link to other programs conveniently. This section explains the wizard tools. N exit camera o the photo viewing window stops at the first scene of the video you just reco...

  • Page 165

    Multimedia 10-9 speed shooting using the hardware hotkeys capture mode n adjust focus o exit camera p switch between camera and video recording modes q open or close the toolbar r camera shutter/video recorder setting mode/wizard mode n use the navigation button to navigate up, down, left and right ...

  • Page 166

    10-10 multimedia manager tap , programs, multimedia, and then multimedia manager. You can use multimedia manager to manage and view multimedia information such as pictures, music, videos, etc. Preview multimedia information n select the folder you want to display. O tap to change the order of the li...

  • Page 167

    Multimedia 10-11 slide show function tap multimedia manager, view, and then slideshow. N double tap anywhere on the screen to exit the slideshow. O playing the last picture while not in the slide show looping mode, tap the screen and then tap the icon to exit the slideshow. Á refer to the method des...

  • Page 168

    10-12 multimedia manager tools tap multimedia manager, tools, and then setting. N slideshow tab: as shown on the left, this is the settings of the slideshow mode. O association tab: select the desired file type you want to open with multimedia manager. P file browse tab: set the browsing method. Tap...

  • Page 169

    Multimedia 10-13 image maker tap , programs, multimedia, and then image maker. Image maker is used to create, edit and view pictures. Use it to view and edit the pictures you take. You can also use the relevant image maker commands and tools such as rotate, stretch, brightness, etc. To edit and proc...

  • Page 170

    10-14 icon meaning of the drawing tool box select foreground and background colors eraser pick color pencil for writing and drawing lines airbrush line curve rectangle ellipse polygon rounded rectangle text select fill with color magnifier brush icon meaning of the drawing toolbar new document open ...

  • Page 171

    Multimedia 10-15 image wizard tap , programs, multimedia, and then image wizard. Image wizard provides frames, icons, filters and simple drawing tools that you can use to process photos and pictures. Wizard will guide you to complete the process step-by-step. You can then choose to save the file or ...

  • Page 172

    10-16 fm tuner tap , programs, multimedia, and then fm tuner. This program is for listening to the radio with headset. The headset will improve radio quality with its built-in antenna. N tool bar: c screen off: this function turns off the screen but leaves the program running. Turn on the power to a...

  • Page 173

    Multimedia 10-17 Á set the station frequency. N tap and edit the frequency to set a custom station. Note: the frequency must be in the legal range. O cancel. P ok. Q delete the previous digit. Á tap the my favorite button in the main screen to set my favorite station. N close and save the setting. O...

  • Page 174

    10-18.

  • Page 175

    Companion programs 11-1 1 1 1 1 c c o o m m p p a a n n i i o o n n p p r r o o g g r r a a m m s s / / microsoft ® pocket outlook includes calendar, contacts, tasks, messaging, and notes. You can use these programs individually or together. For example, e-mail addresses stored in contacts can be us...

  • Page 176

    11-2 calendar: scheduling appointments and meetings use calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (agenda, day, week, month, and year) and easily switch views by using the view menu. N tap to go to today. O tap to ...

  • Page 177

    Companion programs 11-3 create an appointment n tap to return to the calendar (the appointment is saved automatically). O tap to choose from predefined text. P tap to choose from previously entered locations. Q tap to select a time. R tap to select a date. S notes is a good place for maps and direct...

  • Page 178

    11-4 use the summary screen when you tap an appointment in calendar, a summary screen is displayed. To change the appointment, tap edit. N view appointment details. O view. P tap menu and then edit to change appointment. Create meeting requests you can use calendar to set up meetings with users of o...

  • Page 179

    Companion programs 11-5 schedule a meeting 1. Create an appointment. 2. In the appointment details, hide the input panel, and then tap attendees. 3. From the list of e-mail addresses you’ve entered in contacts, select the meeting attendees. The meeting notice is created automatically and placed in t...

  • Page 180

    11-6 contacts: tracking friends and colleagues contacts maintains a list of your friends and colleagues so that you can easily find the information you’re looking for, whether you’re at home or on the road. N tap and enter part of a name to quickly find it in the list. O tap to display the contact d...

  • Page 181

    Companion programs 11-7 create a contact 1. Tap new. And then select a contact type. 2. Using the input panel, enter a name and other contact information. You will need to scroll down to see all available fields. 3. To assign the contact to a category, scroll to and tap categories and select a categ...

  • Page 182

    11-8 find a contact there are four ways to find a contact: v in the contact list, enter a contact name in the box under the navigation bar. To show all contacts again, clear text from the box or tap the button to the right of the box. V in the contact list, tap menu, filter and then select the type ...

  • Page 183

    Companion programs 11-9 use the summary screen when you tap a contact in the contact list, a summary screen is displayed. N view contact details. All of the available contact information is listed, you can tap and use easily. O provides the relevant menu. For example, select edit to change the conta...

  • Page 184

    11-10 tasks: keeping a to do list use tasks to keep track of what you have to do. N indicates high priority. O tap to display or edit the task details. P tap and hold to display a pop-up menu of actions. Q tap to change the status. R provides the relevant menu. For example, tap filter to select the ...

  • Page 185

    Companion programs 11-11 create a task 1. Tap menu and then new task. 2. Using the input panel, enter a description. 3. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you will need to hide it to see all available fields. 4. ...

  • Page 186

    11-12 use the summary screen when you tap a task in the task list, a summary screen is displayed. To change the task, tap edit. N view task details. O tap to show and hide additional summary information. P view notes. Q tap to change task. N p q o.

  • Page 187

    Companion programs 11-13 notes: capturing thoughts and ideas quickly capture thoughts, reminders, ideas, drawings, and phone numbers with notes. You can create a written note or a recording. You can also include a recording in a note. If a note is open when you create the recording, it will be inclu...

  • Page 188

    11-14 create a note 1. Tap new. 2. Create your note by writing, drawing, typing, and recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see “enter information on your pocket pc.” n tap to return to the note list (the note is saved...

  • Page 189

    Companion programs 11-15 word mobile word mobile works with microsoft word on your desktop computer to give you easy access to copies of your documents. You can create new documents on your pocket pc, or you can copy documents from your desktop computer to your pocket pc. Synchronize documents betwe...

  • Page 190

    11-16 n select the type of folder you want displayed in the list. O tap to change the sort order of the list. P tap to open a document. Q tap and hold an item to see a pop-up menu of actions. R tap to create a new document. You can change the zoom magnification by tapping view and then zoom. Then se...

  • Page 191

    Companion programs 11-17 using the input panel, enter typed text into the document. For more information on entering typed text, see “enter information on your pocket pc.” to format existing text and to edit text, first select the text. You can select text as you do in a word document, using your st...

  • Page 192

    11-18 excel mobile excel mobile works with microsoft excel on your desktop computer to give you easy access to copies of your workbooks. You can create new workbooks on your pocket pc, or you can copy workbooks from your desktop computer to your pocket pc. Synchronize workbooks between your desktop ...

  • Page 193

    Companion programs 11-19 excel mobile provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering. To display the toolbar, tap view and then check toolbar. N cell contents appear here as you enter them. O select cell contents for the resource of chart. P insert chart ...

  • Page 194

    11-20 tips for working in excel mobile for more information on using excel mobile, tap and then help. Note the following when working in large worksheets in excel mobile: v view in full-screen mode to see as much of your worksheet as possible. Tap view and then check full screen. To exit full-screen...

  • Page 195

    Companion programs 11-21 powerpoint mobile view powerpoint slides created in powerpoint 97 and above versions on your desktop computer. The supported formats include .Ppt and .Pps files. N select the type of folder you want displayed in the list. O tap to change the sort order of the list. P tap to ...

  • Page 196

    11-22 windows media player use microsoft windows media player for pocket pc to play digital audio and video files that are stored on your pocket pc or on a network. To switch to windows media player for pocket pc, tap and then windows media. N use full-screen to view video. O display website. Find m...

  • Page 197

    Companion programs 11-23 use microsoft windows media player on your desktop computer to copy digital audio and video files to your pocket pc. For more information about using windows media player for pocket pc, tap , and then tap help..

  • Page 198

    11-24 internet explore using internet explore use microsoft ® internet explorer mobile to view web or wap pages in either of these ways: v during synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the mobile favorites subfolder in interne...

  • Page 199

    Companion programs 11-25 browse the internet refer to “connecting to the internet” section to connect the pocket pc to the internet and start browsing websites. 1. Tap and then internet explorer. 2. Input the site address into the address bar at the top of the screen and connect to this site. 3. Use...

  • Page 200

    11-26 view mobile favorites and channels n tap the favorite you want to view. O tap to add or delete a folder or favorite link. 1. Tap the favorites button to display your list of favorites. 2. Tap the page you want to view. You’ll see the page that was downloaded the last time you synchronized with...

  • Page 201

    Companion programs 11-27 favorite links during synchronization, the list of favorite links in the mobile favorites folder on your desktop computer is synchronized with pocket internet explorer on your pocket pc. Both computers are updated with changes made to either list each time you synchronize. U...

  • Page 202

    11-28 5. Synchronize your pocket pc and desktop computer. Mobile favorites that are stored in the mobile favorites folder in internet explorer are downloaded to your pocket pc. If you did not specify an update schedule in step 3, you will need to manually download content to keep the information upd...

  • Page 203

    Maintaining the pocket pc 12-1 1 1 2 2 m m a a i i n n t t a a i i n n i i n n g g t t h h e e p p o o c c k k e e t t p p c c / / backup utility tap , programs, utilities, and then backup utility. Backup utility is used to back up or restore files saved in the pocket pc. You can back up personal da...

  • Page 204

    12-2 backup files wizard mode n tap backup. O tap next button and the wizard will guide through the steps that follow. P standard: switch to the standard mode. Standard mode backup your personal data to a storage space. Á tap the backup tab. N tap to check the items for backup. O tap the function bu...

  • Page 205

    Maintaining the pocket pc 12-3 advanced settings options under the backup files screen, tap advanced button to enter the advanced settings screen as shown below. Á check the options as required. N if you check this option, the wizard will guide you through the steps to complete the operation the nex...

  • Page 206

    12-4 Á if you checked “auto backup on schedule,” tap to enter the screen shown on the left. N backup frequency. O tap the date button on the right of “starting” to set the starting date. P tap the time button on the right of “starting” to set the starting time. Q if you have selected “weekly,” tap t...

  • Page 207

    Maintaining the pocket pc 12-5 restore files caution! 1. When restoring files, the system will delete all current data in the pocket pc and replace it with the backup files. 2. To make sure that files can be restored successfully, do not use the pocket pc while performing restore. 3. Restore cannot ...

  • Page 208

    12-6 standard mode restore the backup personal data from a storage space. Á tap the restore tab. N select “latest” below “restore from.” or select from the list. O tap backup file name from the list under “file name.” p tap restore button to start restoring. N p o.

  • Page 209

    Maintaining the pocket pc 12-7 adding or removing programs programs added to your pocket pc at the factory are stored in rom (read-only memory). You cannot remove this software, and you’ll never accidentally lose rom contents. All other programs and data files added to your pocket pc after factory i...

  • Page 210

    12-8 5. Double-click the *.Exe file. N if the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the software has been installed on your desktop computer, the installer will automatically transfer the software to your pocket pc. O if the file is not a...

  • Page 211

    Maintaining the pocket pc 12-9 add a program to the start menu tap , settings, the personal tab, and then menus. Á check the box for the program. If you do not see the program listed, you can either use file explorer on the pocket pc to move the program to the start menu folder, or use synchronizati...

  • Page 212

    12-10 v using synchronization tools on the desktop computer: use the explorer in synchronization tools to explore your pocket pc files and locate the program. Right-click the program, and then click create shortcut. Move the shortcut to the start menu folder in the windows folder. The shortcut now a...

  • Page 213

    Maintaining the pocket pc 12-11 manage memory view memory status tap , settings, the system tab, and then memory. Á tapthe main tab. N the status of storage and program memory. O find: quick link to the search program. Á tap the storage card tab. N current storage card memory status. O tap to select...

  • Page 214

    12-12 Á tap the running programs tab. N tap a program name in ”running programs list” and when it is highlighted, tap activate or stop. O activate: start running the program you selected. Stop: stop the program you selected. Stop all: stop all programs in the “running programs list.” find available ...

  • Page 215

    Maintaining the pocket pc 12-13 1. Tap , programs, and then file explorer. Use file explorer to move the files you want to keep to external storage cards. Tap and hold the items to be moved, then tap cut or copy on the pop-up menu. Move to the storage card and then tap paste. 2. Use file explorer to...

  • Page 216

    12-14 tap , programs, notes/word mobile/excel mobile, menu, and then options. 1. Enter the notes file list screen. 2. Tap menu and then options. 3. Tap the “save to” function button and select sdmmc from the list. This indicates that you are using your external storage card. Hereafter, new files wil...

  • Page 217

    Maintaining the pocket pc 12-15 system information tap , settings, the system tab, and then system information. Á tap + or - to display or hide the system information..

  • Page 218

    12-16.

  • Page 219

    Voice commander 13-1 1 1 3 3 v v o o i i c c e e c c o o m m m m a a n n d d e e r r / / tap , programs and then voice commander. Voice commander is continuous voice recognition application software in the pocket pc. Voice commander allows the user to use their own voice to dial and control function...

  • Page 220

    13-2 starting voice commander here are two methods for running voice commander: 1. Tap , programs, voice commander, and then voice commander. 2. Voice commander button. The system sets the button on the pocket pc as the exclusive “voice commander” button. Just press this button to run voice commande...

  • Page 221

    Voice commander 13-3 voice command format press the voice commander button on the pocket pc and enter the voice commander screen. Voice name dialing usage: call at example 1: call jennifer lopez example 2: call jennifer lopez at mobile voice show contact usage: show at example 1: show eric clapton e...

  • Page 222

    13-4 tips all the names in contacts will automatically become recognizable contacts in the “voice dialing” syntax. However, if the number of contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these entries to voice commander for recognition, tap menu and then ...

  • Page 223

    Voice commander 13-5 voice commander settings there are two ways to run voice commander settings: tap , programs, voice commander, and then voice commander settings. Tap menu and then settings while using voice commander. Voice commander settings allows the user to personalize the voice commander se...

  • Page 224

    13-6 q play button: play the recorded voice tag for this contact and hear how it is pronounced. R build button: record the voice tag for this contact again. S delete button: delete the voice tag for this contact. T contacts tab: sets the voice commands for contacts. Application tab: sets the voice c...

  • Page 225

    Voice commander 13-7 tips you can choose which contacts are to be added to the recognizable range of the voice commander. By default, the system automatically adds all names within the recognizable range. If the number of contacts exceeds 1000 entries, the system will not recognize the excessive ent...

  • Page 226

    13-8 application settings page tap voice commander settings and then the application tab and the settings page will list the applications and settings installed by the pocket pc on and then programs (whether or not it is selected, with or without voice tag). You can choose which applications are to ...

  • Page 227

    Voice commander 13-9 application example: you want to record windows live™ messengers as “chat room.” 1. Tap windows live™ messengers. 2. Tap build button. 3. When you hear a beep, say the words “chat room” that you want to record. 4. When you hear a second beep, say “chat room” again. 5. After reco...

  • Page 228

    13-10 music settings page tap voice commander settings and then the music tab, the settings page will list the music files and configuration status of the specify folder in your pocket pc or on your storage card. If you add a new music file, the system will update in real-time, automatically adding ...

  • Page 229

    Voice commander 13-11 n check box function if the music file name is checked, it can be identified normally. If unchecked, this indicates that it is not within the recognizable range. If the check box is gray and cannot be checked, this indicates that the item is unrecognizable. Build a voice tag to...

  • Page 230

    13-12 advanced settings page the sensitivity setting is for voice recognition. The “length of phone number” setting specifies the maximum number of digits that can be entered as the phone number. These settings will improve recognition accuracy. N sensitive: when you use this setting, the voice reco...

  • Page 231

    Voice commander 13-13 faq question: i want to make a call to my friend andy miller, but i’m tired of reading manuals. What do i need to know if i just want to make phone calls? Answer: make sure you have andy miller’s name and phone number in the contact database. Press the voice commander button, a...

  • Page 232

    13-14 question: i performed digit training today, but i found that the accuracy is worse than before, what do i do now? Answer: you can retry the digit training again in a “quiet” place. And if it still doesn’t help, disable the adapted model and use the default one. To disable the adapted model, ta...

  • Page 233

    Specifications 14-1 1 1 4 4 s s p p e e c c i i f f i i c c a a t t i i o o n n s s / / item description operating system windows mobile ® 6 professional processor samsung sc3 2442, 400 mhz memory 128 mb flash rom, 64 mb sdram display 2.8", 240 x 320, 65,536 colors, tft-lcd communication gsm/edge qu...

  • Page 234

    14-2 item description environmental temperature daily operation: 0°c ~ 40°c; storage: -10°c ~ 50°c environmental humidity 45% ~ 85% dimensions 117.5 x 59 x 19.6 mm (lxwxh) 165 g including battery optional accessories battery, car charger, bluetooth ® headset design and specifications are subject to ...

  • Page 235

    Regulation notice and safety declaration 15-1 1 1 5 5 r r e e g g u u l l a a t t i i o o n n n n o o t t i i c c e e a a n n d d s s a a f f e e t t y y d d e e c c l l a a r r a a t t i i o o n n / / sar information read this manual carefully before using. Warning: reduced electromagnetic waves, p...

  • Page 236

    15-2 health and safety information electrical and battery safety ♥ use only the ac adapter provided with this product. Do not use similar items from other products. The provided ac adapter is for use with this product only. Do not use it for other electrical products. ♥ follow the specifications of ...

  • Page 237

    Regulation notice and safety declaration 15-3 warranty security ♥ in case the pocket pc is damaged, kindly return it to your place of purchase. Do not attempt to disassemble this device on your own as this may void the warranty. ♥ if any hazards result from the failure of the user to comply with usa...

  • Page 238

    15-4 safety in aircrafts ♥ due to the possible interference caused by this product to an aircraft's navigation system and its communications network, using this product on board an airplane is against the law in most country. Interference with medical equipment functions ♥ this product may cause med...

  • Page 239

    Regulation notice and safety declaration 15-5 explosive atmospheres ♥ when in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and user should obey all signs and instructions. Sparks in such areas could cause an explosion or result...

  • Page 240

    15-6.

  • Page 241

    Faq 16-1 1 1 6 6 f f a a q q / / 1. What features does the pocket pc have? Answer: n built-in 802.11b/g wireless networking module. O the built-in camera module’s sensitization, filming quality are better than other brands of pocket pc in the same class. P the latest windows mobile ® 6 professional ...

  • Page 242

    16-2 3. My pocket pc cannot boot. What should i do about it? Answer: n make sure the pocket pc battery you use still has enough power. O plug your pocket pc into the charger, and make sure the red charging indicator lights up. Press the “power button.” p if you have done the above but your pocket pc...

  • Page 243

    Faq 16-3 5. Why doesn’t my pocket pc make any sound? Answer: n tap the speaker icon on the top right of the screen, then select the volume control options, or adjust the volume of the incoming call sound. O alternatively, you may use the volume control key to control the volume. 6. Why does my pocke...

  • Page 244

    16-4 8. The characters on the screen are too small to read. How can i enlarge them? Answer: tap , settings, the system tab, screen, and then the text size tab. You may adjust the text size as you wish. Also, you may select the landscape orientation in the general tab screen. Try and change them so t...

  • Page 245

    Faq 16-5 11. My pocket pc's activesync cannot be executed or make a connection. What should i do about it? Answer: n make sure you have installed activesync version 4.5 or above. You could use the getting started cd or download activesync version 4.5 from http://www.Microsoft.Com/downloads/ to insta...

  • Page 246

    16-6 13. My pc currently has microsoft outlook installed, will it work with the pocket pc? Answer: refer to the download link which you can see in the companion cd. If your current microsoft outlook version is older than that, uninstall the older version, then install the microsoft outlook limited t...

  • Page 248

    First version: december 2006 current version: june 2007, version 3 number: 20070530