E-TWOW BOOSTER PLUS User Manual - Riding Operation
11
RIDING OPERATION
Getting Ready!
1. Choose a suitable venue for riding.
2. Unfold the scooter in accordance with the instructions.
3. Adjust the T-pipe to the suitable height according to your height.
Start
1. Press the power button to turn on the power.
2. Stand one foot on the scooter and leave another foot on the ground.
3. Gently press down on the right thumb accelerator, the scooter will immediately move
forward slowly. Place the foot which is on the ground on the scooter. With your right thumb
press the right thumb accelerator. The bigger the pressure, the faster it will go.
Brake
1. Electromagnetic brake - pressing the left thumb electronic magnetic brake will activate
the electromagnetic brake, which will power off the scooter and apply the brake. The more you
press, the greater the braking force will be.
2. Mechanic brake - E-Twow also has a mechanic brake, which is activated by pressing
with the foot on the rear fender. This also activates a sensor that stops the front wheel motor.
Cruise control
– P2
This option allows the user to set and maintain a constant speed, without keeping the
acceleration lever pressed. Press the acceleration right thumb and keep the same speed for 5
seconds and the cruise control will automatically
begin. Then you can release the acceleration
lever, and the scooter will continue cruising with the same speed. You can switch the function
off easily as well, by pressing the brake or acceleration lever gently. The cruise control function
is not activated by default, you need to activate it after the purchase of the scooter.
This
function can be activated or deactivated from the central control unit, according to the user’s
needs.
Zero start
– P1
This function is designed for safety reasons. The option allows the acceleration to be activated
only the scooter is first pushed with the foot and the wheel is in motion, ensuring that the
acceleration lever is not actioned by mistake. The zero start function is not activated by default,
you need to activate it after the purchase of the scooter. This function can be activated or
deactivated from the central control unit, according to the user’s needs.
Maximum Speed Limitation
– L1, L2, L3, L4, L5
A lot of countries have a legislation that imposes a speed limitation for electrical vehicles. Once
a maxim speed is set, the scooter won't exceed that speed. The maximum speed limit options
are 6km/h, 12 km/h, 20 km/h, 25 km/h. This function can be activated or deactivated from the
central control unit, according to the user’s needs.