E-TWOW s2 booster plus User Manual - Riding Operation
User Manual Page 14 / 20
04/2017 E-Twow
®
Riding Operation
1. Getting Ready!
1. Choose a suitable venue for riding.
2. Unfold the scooter in accordance with the instructions and make
sure the safty pin is engaged.
3. Adjust the T-pipe to the suitable height according to your height.
2. Start
1. Press the power button to turn on the power.
2. Stand one foot on the scooter and leave another foot on the
ground.
3. Gently press down on the right thumb accelerator, the scooter
will immediately move forward slowly. Place the previous foot
on the scooter. Press the right thumb accelerator with your right
thumb. The greater pressure you put, the faster it will go.
3. Brakes
1. Electromagnetic brake - pressing the left thumb electronic mag-
netic brake will activate the electromagnetic brake, which will
power off the scooter and apply the brake. The more you press,
the greater the braking force will be.
2. Mechanic brake - E-Twow
®
Scooters also have a mechanic brake,
which is activated by pressing with the foot on the rear fender.
This also activates a sensor that stops the front wheel motor.
4. Cruise control
This option allows the user to set and maintain a constant speed,
without keeping the acceleration lever pressed. Press the accel-
eration right thumb and keep the same speed for 5 seconds and
the cruise control will automatically begin. Then you can release
the acceleration lever, and the scooter will continue cruising with
the same speed. You can switch the function off easily as well, by
pressing the brake or acceleration lever gently. The cruise control
function is not activated by default, you need to activate it after
the purchase of the scooter. This function can be activated or
deactivated from the central control unit, according to the user’s
needs.