EA-ELEKTRO-AUTOMATIK PS 2042-06B Instruction Manual - page 19
19
Instruction manual
PS 2000 B Single Series
EN
Date: 18-04-2013
Operating the device
7.3 Remote control with EasyPS2000
The device can be remotely controlled via the USB port
by means of a PC and a Windows software called Ea-
syPS2000. The software and a USB cable are included in a
seperately available kit. The device requires a license code
to be unlocked in the software. The code can be purchased
as an option. Further information are available upon request
or in the instruction manual of the EasyPS2000 software,
as well as on our website. In order to purchase the kit and
the license code, contact your dealer or send an e-mail to
and state article number
and serial number of the device.
7.4 Programming
The device can be programmed and remotely controlled
by custom software and via the USB port. This port is enu-
merated as virtual COM port on certain operation systems
(currently: Windows only). This enables the user to easily
implement the device into the target application.
The programming documentation is available on the web-
site of the device manufacturer in the download section
or upon request. When programming custom software no
device license is required.
The connection to the PC is done a standard mini USB
cable.
The manufacturer can not provide the USB driver for other
operating systems such as Linux or MacOS. There are free
or commercial drivers available from the Internet for those
OS‘s. The USB driver has to be of type CDC (Communi-
cations Device Class).
7.5 Firmware updates
The device firmware can be updated if necessary. Details
about firmware updates and the procedure are in the in-
struction manual of the software EasyPS2000, which can
be found in the seperately available software kit or on our
website. Only this software can be used to update a PS
2000 B unit.
The update feature of the software does not require a
license code.