Ea2 BL502 User Manual - page 11
ENGLISH 7
ENGLISH 8
• For Time Zone: If you receive no RC-DCF frequency signal, the time zone should be
set to 0. Time Zone is used in countries which can received the DCF frequency signal
but the time zone is different from German Time ( i.e. GMT+1).
Note:
(1) Second adjusted to zero only.
(2) The Time Setting Mode will automatically exit in 5 seconds without any adjustment.
7.2 12/24 Hour Display mode:
Press “(12/24)” button (B7) to select 12 or 24 hours mode.
7.3 Snooze Alarm Clock Function:
• Press “ MODE/SET” button (B6) to select to view :
Time Date/Month/Weekday Alarm Time (“ALM” Shown on the LCD)
• When viewing the Alarm Time, hold “MODE/SET” button (B6) for 3 seconds to enter
Alarm Time setting. Press “-” (B4) or “+” (B7) buttons to adjust the alarm time. Press
“MODE/SET” button (B6) to confirm the setting.
• Press “ALARM ON/OFF” button (B1) to switch alarm on or off. If it is on, alarm icon
“
” shown on the LCD.
• When alarming, press “SNOOZE / LIGHT” button (B2) to activate the snooze alarm,
alarm icon (“
”) flashes on LCD. The alarm will snooze for 5 minutes, then it
alarms again. This snooze function can be enabled for maximum 7 times.
• Except “Snooze/Light”(B2) button, press any button to stop the snooze alarm
(4) Temperature Alert Function:
• Hold “ALERT” button (B5) for 3 seconds to enter Temperature Alert setting,
Temperature’s digits flash.
• Press “-” (B4) or “+” (B7) button to select Indoor or Outdoor CH1, CH2 and CH3
temperature alert (if more than one sensor is registered). Press “ALERT” button (B5) to
confirm the setting.
• Press “-” (B4) or “+” (B7) button to set the upper ” ” and lower “ ” limit of the
temperature. Press “ALERT “button (B5) to confirm the setting.
• Press “ALERT” button (B5) to set the Temperature Alert function ON or OFF (“ ”
appears on the LCD if this function is activate). (5) Maximum / Minimum Temperature
& Indoor Humidity Recording Function:
• Press “MAX/MIN” button (B3) to show the maximum recorded Indoor /Outdoor
Temperature and Indoor Humidity. “
” is shown on the LCD
• Press “MAX/MIN”Button (B3) again to show the minimum recorded Indoor/Outdoor
Temperature and Indoor Humidity. “
” is shown on the LCD.
• Hold “MAX/MIN” button (B3) for 3 seconds to clear the recorded maximum and
minimum reading.
7. Time and Alarm Setting
7.1 Manual Time Setting:
• Hold “MODE/SET” button (B6) for 3 seconds to enter Clock/Calendar setting mode
when viewing the Time.
• Press “-” (B4) or “+” (B7) button to adjust the setting and press “MODE/SET” button
(B6) button to confirm each setting.
• The setting sequence is shown as follow: Hour, Minute, Second, Year, Month/Day
sequence, Month, Day, Time Zone, Day-of-week language.
• 8 languages can be selected in Day-of-week, they are: German, English, Denmark,
Dutch, French, Italian, Spanish and Russian. The languages and their selected
abbreviations for each day of the week are shown in the following table.
Language
Sunday
Monday
Tuesda Wednesday Thursday
Friday
Saturday
German, GE
SO
MO
DI
MI
DO
FR
SA
English, EN
SU
MO
TU
WE
TH
FR
SA
Russian, RU
BC
ПН
BT
CP
ЧТ
ПТ
СБ
Denmark, DA
SO
MA
TI
ON
TO
FR
LO
Dutch, NE
ZO
MA
DI
WO
DO
VR
ZA
Italian, IT
DO
LU
MA
ME
GI
VE
SA
Spanish, ES
DO
LU
MA
MI
JU
VI
SA
French, FR
DI
LU
MA
ME
JE
VE
SA