Eachine E011C User Manual - page 10
9
1
2
2.Pairing Remote Control with Drone
①Turn on the power of the drone; put the drone on
plain ground; check whether the indicator lights
of remote control and LED lights of drone flash.
②Push the accelerator joystick to the top and then
pull back to the bottom. On hearing a clear sound,
the indicator light of remote control and LED lights
of drone will turn from flashing lights to constant
lights, which means the pairing completes.
3.Calibration
①Calibration
②Reset the course
Calibrate the drone when it cannot vertically ascend.
Press “Calibration” button and the indicator light of
drone would start flashing,then trun to constant light.
Thus the calibration completes. Ensure the whole
process of calibration is operated under horizontal
and steady circumstances.