1. DL manuals
  2. Eagle Access Control Systems
  3. Gate Opener
  4. Eagle-E7
  5. Instruction Manual

Eagle Access Control Systems Eagle-E7 Instruction Manual

Manual is about: Eagle-E7 Swing Gate Operator Instruction manual

Summary of Eagle-E7

  • Page 1

    E agle -e7 s wing g ate o perator eagle-e7 swing gate operator for single & dual swing gates to 16’ 700 lbs eagle-e7 short swing gate operator for single & dual swing gates to 10’ 600 lbs.

  • Page 2

    Eagle access control systems, inc. Www.Eagleoperators.Com 2 ul listings important safety information ................................................3 requirements for ul compliant installation..............................3 ul 325 classifications .......................................................

  • Page 3

    Eagle access control systems, inc. Www.Eagleoperators.Com 3.

  • Page 4

    Eagle access control systems, inc. Www.Eagleoperators.Com 4.

  • Page 5

    Eagle access control systems, inc. Www.Eagleoperators.Com 5.

  • Page 6

    Eagle access control systems, inc. Www.Eagleoperators.Com 6 before installation, be sure that • gate posts, hinges, and gate construction, is sufficient to support the gates and the gate operators, • gates swing freely and there is no friction or obstruction between moving parts, • measurement c (be...

  • Page 7

    Eagle access control systems, inc. Www.Eagleoperators.Com 7 important note: the following are exam- ple applications. Your appli- cation may vary. It is the installer’s responsibil- ity to choose the most suit- able dimensions based on site-specific issues. Use “a compact” dimension only when necess...

  • Page 8

    Eagle access control systems, inc. Www.Eagleoperators.Com 8 measurements for mounting (c ontinued ) installation optional method: push gate open note: the following are example applications. Your application may vary. It is the installer’s responsibility to choose the most suitable dimensions based ...

  • Page 9

    Eagle access control systems, inc. Www.Eagleoperators.Com 9 note: with the gate in the closed position, attach the anchoring plate & front bracket to the gate leaf, making sure that the front bracket is level with the back bracket. Ensure proper dimension e (see measurements previous page). Mounting...

  • Page 10

    Eagle access control systems, inc. Www.Eagleoperators.Com 10 gearmotor housing cover screw drive cover step 2. Unscrew 2screws to remove screw drive cover self–locking nut (m8) endless screw drive pin (m8x10) pin (m8x50) back swivel joint self-locking nut (m8) bushing pin (m8x38) note: lubricating t...

  • Page 11

    Eagle access control systems, inc. Www.Eagleoperators.Com 11 open limit using the manual release key, release the gearmotor and swing the gate-leaf to the fully open position. Loosen the open limit micro-switch assembly. Slide the micro-switch assembly along the mi- cro-switch bar until it is insert...

  • Page 12

    Eagle access control systems, inc. Www.Eagleoperators.Com 12 wiring the operator arm installation motor 2 motor 1 the eagle-e7 electro-mechanical swing arm includes color coded wire for convenient connection to the diamond-dc controller. On dual gate application, the electro-mechanical farthest from...

  • Page 13

    Eagle access control systems, inc. Www.Eagleoperators.Com 13 auto power save mode—auxiliary power installation two 24 vdc auxiliary outputs are available for powering accessories. Auxiliary output 1—use auxiliary output 1 for auto power save mode. Auto power save mode maximizes battery back-up opera...

  • Page 14

    Eagle access control systems, inc. Www.Eagleoperators.Com 14 loop detectors installation s tep 1. Using removable connector, connect wire (twisted pair) from each in- ground loop as indicated. S tep 2. Plug in eagle loop detector to corresponding in-ground loop as indicated (u se only e agle b rand ...

  • Page 15

    Eagle access control systems, inc. Www.Eagleoperators.Com 15 power fail operation installation in the event of a power failure, your eagle-dc gate operator will operate on battery back-up until ac power is restored or the batteries are completely discharged. Al- ternatively your eagle-dc gate operat...

  • Page 16

    Eagle access control systems, inc. Www.Eagleoperators.Com 16 power fail operation (c ontinued ) installation complete battery discharge to protect battery life, the eagle-dc gate operator automatically shuts down when battery voltage drains to the minimum allowable for safe operation. If shut down o...

  • Page 17

    Eagle access control systems, inc. Www.Eagleoperators.Com 17 hold-open / hold-closed during ac power failure if you do not want to use battery back-up operation during an ac power failure, you can choose to hold-open (fail-safe) or hold-closed (fail-secure) your gate until the ac power is restored. ...

  • Page 18

    Eagle access control systems, inc. Www.Eagleoperators.Com 18 feature selector set-up & operation feature selector switches 1. Master / slave (not applicable/do not use) 2. Opening direction 3. Motor brake (not applicable/do not use) 4. Reverse loop input can be set to no or nc master 5. One pass is ...

  • Page 19

    Eagle access control systems, inc. 13745 saticoy street van nuys, ca 91402 tel: 818-779-0920 * fax: 818-779-0093 * toll free: 800-708-8848 www.Eagleoperators.Com.