Installation & owners manual slide gate operator avi avi tm access control systems, inc. Made in the usa pow er ed b y eagl e av i maximum gate capacity 14 ft & 200 lbs avi slide rev - c.
2 avi slide rev - c.
1 avi slide rev - c ul 325 class i, ii, iii and iv motor power 1/2 hp - 120 vac @ 60 hz - 4.3 amp chain type #41 max gate length 14 ft max gate weight 200 lbs normal gate cycles continuous entrapment protection: built-in erd adjustable reversing sensor input for photo sensor input for edge sensor ta...
2 avi slide rev - c safety 1. Install the gate operator only when: a) the operator is appropriate for the construction of the gate and the usage class of the gate. B) all openings of a horizontal slide gate are guarded or screened from the bottom of the gate to a minimum of 6 feet (1.83 m) above the...
3 avi slide rev - c ul 325 model classifications ul 325 entrapment protection class i residential vehicular gate operator - a vehicular gate operator (opener or system) intended for use in a home of one to four single family dwellings, or a garage or parking area associated therewith. Class ii comme...
4 avi slide rev - c gener al safety important safety information general safety information install warning signs installing opening devices 1. Never let children operate or play with gate controls. Keep the remote control away from children. 2. Always keep people and objects away from gate. No one ...
5 avi slide rev - c general safety information continued entrapment protection vehicular use only vehicular use only do not let pedestrians cross the path of a moving gate. Eagle gate operators are for vehicular use only. They are not for pedestrian use. Pedestrian must use a separate entrance. Do n...
6 avi slide rev - c general safety information continued closing gate incorrect correct obstructing wall catch rollers (safety cover) catch post minimum of 3" clearance between gate and obstructing wall or other object in open position. 3" 4" do not install a stop or catch post in front of the gates...
7 avi slide rev - c front installation methods of installation front position an experienced installer should perform the installation. Improper installation may result in property damage, severe injury or death. Read the entire manual before proceeding with the installation. Eagle access control sy...
8 avi slide rev - c additional idler wheel/sprocket required. Eagle part number: e651 idler wheel assembly complete (no mounting post). The “no weld chain kit” comes with the gate operator. Gate connection rear position conceals chain from outside of property. Top view 2” gate frame master chain lin...
9 avi slide rev - c concrete p ad or mount p ost installation concrete pad installation post mount installation pow ere d b y ea gl e av i run any 1/2” conduit needed for the installation. Recommended dimensions 5” min above ground. 19” 24” 18” pipe d epth in concrete recommended . 18” min above gro...
10 avi slide rev - c loops entr apment protection + maglock - 24 vdc #5 + alarm - 12 vdc #6 reverse loop #2 power 24v ac #7 key #3 input/output reverse and exit in-ground loop installation external entrapment protection reversing loops are used to prevent the gate from closing on a vehicle while it ...
11 avi slide rev - c control board feature selector master open right brake on close timer on slave open left brake off close timer off 1 on 234 off—on select motor 15a opening timer erd control multi function gate status feature selector m/s phase 1 0 closing master open right brake on close timer ...
12 avi slide rev - c input p o wer connection limit switc hes & open left/right motor 15a opening timer erd control multi function gate status feature selector m/s phase 1 0 closing master open right brake on close timer on slave open left brake off close timer off 1 on 2 3 4 off—on select min max o...
13 avi slide rev - c po wer f ail oper ation radio recei ve r power fail operation make sure power is turned off on operator before inserting hand crank. Insert hand crank into hole and rotate to move gate. Radio receiver installation and “learning” remote button the radio receiver is wired to the c...
14 avi slide rev - c timer erd rev erse sensor motor 15a opening timer erd control multi function gate status feature selector m/s phase 1 0 closing master open right brake on close timer on slave open left brake off close timer off 1 on 2 3 4 off—on select min max open limit erd overload opening cl...
15 avi slide rev - c input/output connection descriptions #2 reverse loop input: momentary or continuous signal - this input is active only when the gate is closing or when its fully open, if this input is active. The close timer is disabled. Vehicle loop detectors and photo sensors should be connec...
16 avi slide rev - c connecting accessories connecting accessories edge sensor sep arate pow er + maglock - 24 vdc #5 + alarm - 12 vdc #6 reverse loop #2 power 24v ac #7 key #3 input/output m-fcn #4 closing-direction only close only switch 1 - on switch 2 - off switch 1 - off switch 2 - off photocel...
17 avi slide rev - c master / sla ve setup master / slave setup important: the 120 vac power for the master and slave operators must be on the same circuit breaker. It is recommended that each gate operator’s initial set-up is completed (direction of gate travel, limit nuts, erd reverse sensor and f...
18 avi slide rev - c troubleshooting gate stops and reverses direction in mid cycle and the overload led remains on. (a) gate operator is not plumb and level. (b) erd current sensor may be set too sensitive. (c) gate encountered an obstruction while cycling. (a) the radio receiver’s led remains on. ...
19 avi slide rev - c pow ere d by e agle av i moving gate can cause serious injury or death keep clear! Gate may move at any time without prior warning. Do not let children operate the gate or play in the gate area. This entrance is for vehicles only. Pedestrians must use separate entrance. Motor 15...
20 avi slide rev - c avi replacement parts list item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 operator cover (removable) operator housing avi control board wire harness on/off switch alarm avi control board bracket idler wheel bra...
21 avi slide rev - c notes.
Eagle access control systems, inc. 12953 foothill blvd. Sylmar, ca 91342 copyright © 2017 eagle access control systems, inc. All rights reserved. Toll free: 1-800-708-8848 phone: (818) 837-7900 fax: (818) 837-7911 www.Eagleoperators.Com slide gate operator avi avi tm access control systems, inc. Mad...
