Eagle CCTV E-M1DVR Operation Manual - page 2
1. Names and Parts
2. Charging Battery and USB out
3. Operation
3.1 To power on the E-M1DVR, gently press Power/Rec Key once and the blue LED on
the botton of the E-M1DVR will illuminate on and the unit will vibrate for about 2-3 seconds.
3.2 The blue LED will blink indicating the system is ready to work.
3.3 To record, gently press Power/Rec Key once. The red LED on the bottom of the
E-M1DVR will illuminate on to show it is recording.
3.4.To stop recording, press Power/Rec Key again and the E-M1DVR will stop recording.
Depending on the fi le size, it takes 2 to 10 seconds for the red LED to go out.
3.5. To snapshot, simply press Photo Capture Key once. The red LED will illuminate on
and automatically go out when the photo fi le is saved.
3.6 Press Power Off Key once to turn off the E-M1DVR. The blue LED will go out shortly.
4. Connecting to PC
4.1 Install the freeware, KMPlayer, to your PC by downloading it from the web link at
http://imgcd.pandora.tv/pan_img/KMP/Download/kmp.exe
4.2 Press Power/Rec to turn on the E-M1DVR. Remove the cover from the bottom of the
E-M1DVR then connect it to the computer with the supplied USB cable.
4.3 When connected to a computer the E-M1DVR is recognised as “removable drive”.
4.4 Double-click the “removable drive” then a folder named “DCIM” will appear.
User may now copy fi les between “removable drive” and computer.
4.5 When fi nished, you eject the removable drive before unplugging the USB cable.
4.6 It is strongly recommended to download the video fi les to a computer when playing back.
Video may not be smooth when it is saved in E-M1DVR over USB connection.
5. Date and Time Setting (for Windows XP)
5.1 Right-click your mouse on the Windows desktop. Choose Notepad from the menu to
create a .txt fi le. Name the fi les as “settime.txt” and save.
5.2 Double click on the newly created Notepad fi le.
5.3 Assuming the current time is 2009, March 9th 14:00pm. Enter the date time information
identically as below, 2009.03.09 14:00:00. Please note the format MUST be identical as the
example. A space must be present in between date and hour and time must be in
24-hour format.
5.4 Power on the E-M1DVR then connect it to the computer.
5.5 Copy the settime.txt fi le from Windows desktop to the root directory of E-M1DVR
5.6 Disconnect the E-M1DVR from computer
5.7 Power on the E-M1DVR and leave it for 10 seconds to allow the system program
make date and time change, now power off the unit and the date and time setting
is completed.
5.8 To reset date and time, repeat above steps.