Eagle Eye PV922 User Manual - Basic Operation
of
44
PV922 | ENGLISH USER MANUAL
7
BASIC OPERATION
Power Charger：
Please chage the battery before first using.
1. Connect charger’s USB pins into PV922’s multifunctional USB port.
2. Connect the charger with standard AC power socket.
3. When the battery is full charged,（ ico on LCD will not flash any more）
，you
can pull out the charger from power socket.
LED lights：
1, During PV922 is in charging mode, the red LED light will be always turn on.
2, After PV922 full charged, red LED light will be turn off and blue light start turn on.
Notice:
If you want to charge power when the DVR is recording, it only can works with wireless camera.
Otherwise, the wire camera has no enough power, may cause bad recording effect.