Eagle MAPCREATE 7 - ADDENDUM Quick Start Manual - page 5
3
• The setup program for the USB SD/MMC Reader will load first.
When the setup program has loaded, a welcome screen will display.
Click NEXT when you're ready to begin the card reader installation.
• Read the complete License Agreement. If you accept the agreement,
click YES. (If you do not accept, click NO, and the SD/MMC Reader
software will not be installed on your computer, and MapCreate will
not run.)
• Choose a destination folder for the SD-MMC Reader program. This is
where you want the files on your hard drive. You can accept the de-
fault (recommended) or choose another location. Click NEXT to con-
tinue.
• Select the folder where you want to place the shortcut for the
SD/MMC Reader program. You can accept the default or choose an-
other location. Click NEXT to continue the installation.
• The setup program is ready to install the SD-MMC Reader program
on your computer. Click NEXT to continue. The setup program will
display the progress of the installation.
6. When the card reader install program has finished, the InstallShield
wizard completion window appears. We strongly recommend that you re-
start your computer now. MapCreate and the card reader will not run until
your computer restarts.
With the "restart my computer now" option selected, click FINISH. After
the computer restarts and Windows has finished loading, plug the card
reader into a USB port. After Windows finishes installing the card