Operation and parts manual rev a 01/2003 hsb21 battery burnisher.
Item no. Qty part no. Description 1 1 001 lower body housing 2 1 002 battery condition meter 3 1 003 rpm meter 4 1 004 60a circuit breaker 5 1 005 36vdc indicator light-red 6 1 006 36vdc indicator light- green 7 1 007 toggle switch 8 1 008 upper hood cover 9 1 009 battery frame assembly 10 3 010 12v...
Item no. Qty part no. Description 46 1 046 5/16-18x 1 1/2 hex head bolt 47 7 047 5/16-18x 1/2 slotted flat head undercut machine screw 48 4 048 5/16-18x 1 slotted truss head machine screw 49 4 049 #6-32x 1 slotted pan head machine screw 50 3 050 #8-32x 1/2 slotted pan head machine screw 51 3 051 #10...
Operating instructions: 1. Make sure burnish pad is on and attached properly. See “pad changing instructions”. 2. Adjust pressure on burnish pad by turning “caster knob” clockwise to reduce pressure on burnish pad. 3. Move “toggle switch” to “on” position; green light will be on. 4. Check “battery c...
Charging batteries: 1. See instructions on charger before operating. 2. Move “toggle switch” to “off” position; green light will be off. 3. Lift and remove “upper hood cover”. 4. Place charger plug into mating plug on machine located on the left side behind batteries. Plug will only connect together...
Trouble shooting: 1. Green light will not come on. A. Check batteries. B. Check battery connections. C. Check circuit breaker. D. Check wire connections to light. E. Check light. 2. Motor will not run. A. Check batteries. B. Check battery connections. C. Check wire connections to switch. D. Check wi...
Warranty policy limited warranty eagle power products (epp) warrants new cleaning equipment against defects in material and workmanship under normal use and service to the original purchaser as detailed below. 10 years subject to the conditions stated below, epp warrants polyethylene tanks and housi...
