1. DL manuals
  2. Eagle Power
  3. Vacuum Cleaner
  4. S6101HQ-S
  5. Operation And Parts Manual

Eagle Power S6101HQ-S Operation And Parts Manual

Manual is about: Eagle Power Hospital Vac Operation and parts manual

Summary of S6101HQ-S

  • Page 1

    Hospital vac models: s6101hq-t s6101hq-s operations and parts manual important! Read this manual prior to use.

  • Page 2: Table of Contents

    Table of contents important safety instructions ..................................................... 1 operation ................................................................................... 4 assembly instructions ............................................................... 5 maintenance ...

  • Page 3: Warning

    Important safety instructions when using an electrical appliance, basic precaution must always be followed, including the following: read all instructions before using this machine. This machine is for commercial use. Warning danger: the machine should never be immersed in water or a pressure jet of...

  • Page 4: Save These Instructions

    Save these instructions warning: rotating fan blades inside the cover. Before opening cover, switch off machine.Wait until the fan/brush stops completely or dust and debris may be ejected. Warning: electrocution could occur if you handle the plug or appliance with wet hands. Do not handle plug or ap...

  • Page 5

    Page 3.

  • Page 6

    Warning: the unit is for dry vacuuming only and must be stored in a dry location 1. Attach paper bag to tank inlet deflector. See figure 1. 2. Ensure that the cartridge filter is securely attached to the bottom of the vacuum head. See figure 2. For s6101hq-t units, insert basket filter into the tank...

  • Page 7

    Page 5 1. Slide on the two collars as pictured. See figure 1 2. Insert wand into the power head neck until it stops. Slide the small collar into the neck of the power head. Screw the large collar onto the powerhead until tight. See figure 2 3. Firmly press the two wands together. 4. Firmly press upp...

  • Page 8

    Servicing the filter servicing the vac motor periodic maintenance (every six to twelve months): 1. Check filter for wear, replace dirt saturated filters that do not respond to normal cleaning. 2. Inspect gasket seals and replace those which have begun to leak. Examine carbon motor bruhes and commuta...

  • Page 9

    Servicing the vac motor carbon brush replacement 1. Disconnect power cord from power source. 2. To access the vac motor, remove the screws that attach the main cover to the head assembly and set the cover to one side. 3. Remove the screws that attach the inner cover to the head assembly and set asid...

  • Page 10

    Pos. Part # description qty 1 s83706 bushing, 8 dia. 4 2 s83724 screw, m5 x 25 4 3 s82822 body 1 4 s82881 hepa filter, 175 x 144 x 125 1 5 s82855 retainer, filter cartridge 1 6 s83735 gasket 1 page 8 filter group (s6101 hq-s) vacuum motor assembly (s6101 hq-s) pos. Part # description qty 1 s81122 el...

  • Page 11

    Pos. Part # description qty 1 s81122 electric cord, 3 x 16 awg 1 2 s80138l strain relief "l" 1 3 s80139 clamp, cord 1 4 s81006 screw, (phillips) m5 x 20 2 5 s83444 terminal block 1 6 s82928au handle base 1 7 s82627 screw, (phillips) m5 x 40 2 8 s82927 handle, black 1 9 s81026 screw, (phillips) m5 x ...

  • Page 12

    Pos. Part # description qty 1 s82652a inlet cover 1 2 s82846 gasket 1 3 s82593 deflector, tank 1 4 s82585 retainer, tank adaptor 1 5 s86132g5-ne tank 1 6 s81026 screw, (phillips) m5 x 30 4 7 s81302 rivet, m5 x 19 4 8 s83602 clamp, tank, complete 2 pos. Part # description qty 1 s86045 base 1 2 s81005...

  • Page 13

    Pos. Part # description qty 1 s82652a inlet cover 1 2 s82846 gasket 1 3 s82593 deflector, tank 1 4 s82585 retainer, tank adaptor 1 5 s86039g55-gp tank 1 6 s81026 screw, (phillips) m5 x 30 4 7 s81302 rivet, m5 x 19 4 8 s83602 clamp, tank, complete 2 pos. Part # description qty 1 s86045 base 1 2 s8100...

  • Page 14

    Pos. Part # description qty 1 vca1bas350 base 1 2 use kit vcsa8vtel screw 3 3 vca1suprsx right side plate, roller brush 1 4 vc1108035000 bearing 2 5 vcsa4r3n1 roller brush, complete (incl 03, 04, & 05) 1 6 vca1suprdx left side plate, roller brush 1 7 vca2ctru belt, poly v 1 8 vca1carne3 case 1 9 vca...

  • Page 15

    B e c d g a f pos. Part # description qty a s76158 wand, curved 1 b s76240 wand, straight 1 c s70617 crevice tool 1 d s70004 round brush 1 e s70616 hand tool 1 f s70632 double use brush 1 g s71685 hose 1 tools filters recommended spare parts s80147 paper bags, pack of 5 s82881 hepa filter, cartridge...

  • Page 16

    Serial number: date purchased: model number: eagle power products sales and service provided by: 1174 northland drive mendota heights, mn 55120 651.686.5399 fax 651.686.5695 www.Eaglepower.Com warranty policy limited warranty eagle power products (epp) warrants new cleaning equipment against defects...