EAGLE VISION EV3000-P-EMCCD User Manual - 3. Installation Notes
United Vision Solutions, Co.
sales@unitedvisionsolutions.com
+1-413-592-8477
10 Center St., Suite 401-402 +1-413-591-8477
Chicopee, MA 01013 USA
3. Installation Notes
Before operation the unit, you must read this user’ s Manual
thoroughly and retain it for future reference.
You must clean it with a wet cloth. Never use liquid cleanser.
Never attach any other things to the unit as this could lead to
danger.
Be careful not to put this unit on an unstable stand, tripod,
shelf, or Table
Do not leave the unit in a location near heat sources or
humidifier. This Unit needs ventilation
Power supply AC100V~230V according to model desiring to
confirm optimum power supply necessarily before establishment
because is manufactured have better use 3 - WIRE GROUND
TYPE.
HOUSING CABLE of PAN/TILT must observe to become tight or
is not been wrenched when rotate PAN/TILT.
You must stop operation this unit and never connect the
connector of the cable to the unit in case of the followings:
In case of the control cable being damaged.
When any liquid or unfavorable material fall into the unit.
When the unit doesn’ t work properly according to the
instruction.
When the unit fell down or the cabinet was damaged.
You must make an expert examine the accessories whether they
have the same specific character when you need replacement of
them.