Earlex spray station hv7000 ® operating instructions thank you for purchasing the earlex sprayport. This is a highly versatile spray kit and can be used on a variety of applications. Before use - please read the safety & operating instructions. Please retain for future reference.
● caution: to reduce the risk of electric shock or injury, do not use in the rain. Store indoors ● the substances used with this spray applicator (paint, thinners etc) may contain hazardous, harmful, explosive or corrosive materials. Always comply with the safety instructions issued with this produc...
1 2 3 4 5 6 7 8 9 10 11 12 13 15 14 type p key description part no. 01. Air cap ring l0215 02. Air cap l0238 03. Spray direction plate l0206 04. 2.0mm fluid tip l0237 05. Fluid tip seal l0211 06. 2.0mm fluid needle l0236 07. Spring l0216 08. Fluid adjusting screw l0210 09. Gland nut l0208 10. Gland ...
Turbine unit & carrier stand parts drawings (230v models) power in (iec connector) circuit breaker 1 2 3 5 6 7 4 mains switch (230v) for information on all spare parts for this unit please contact earlex ltd on our helpline no: +44 (0) 1483 454666 volts 230v wattage 1100w turbine stages 3 length of ...
Turbine unit & carrier stand parts drawings (110v models) 110v power socket circuit breaker 1 2 3 5 6 7 4 mains switch (110v) for information on all spare parts for this unit please contact earlex ltd on our helpline no: +44 (0) 1483 454666 volts 110v wattage 1100w turbine stages 3 length of mains c...
The earlex sprayport is an industrially rated, portable, paint spraying system and is intended for use by pro- fessionals. Hvlp stands for high volume, low pressure. This is a type of spraying that allows you to spray ex- tremely accurately but without all the overspray that occurs with high pressur...
Water based paints and 25 - 75 seconds emulsions oil based paints 45 - 50 seconds wood preservatives no dilution primers 45 - 50 seconds varnishes manufacturer’s ratio aluminium paints manufacturer’s ratio wood stains manufacturer’s ratio ideal viscosity this spray applicator can be used with produc...
1. Evenly control the speed of movement of the spray applicator. A fast speed will give a thin coat and a slow speed will give a thick coat. 2. Only apply one coat at a time. If a further coat is required follow the paint manufacturer’s instructions for drying times. 3. If spraying small areas or ob...
Spray gun 1. Remove the applicator container. 2. Pour any leftover paint into its container so that it can be used for future projects. 3. Pour a quantity of the respective thinner into container, shake the spray applicator lightly, reassemble the applicator, then spray this liquid through the appli...
Spray applicator ● keep the internal workings of the spray applicator clean. The spray applicator should be thoroughly cleaned after each use. Follow the cleaning instructions on page 9 with reference to the drawings on page 3 ● check the needle and fluid tip on a regular basis for excessive wear, a...
The paint runs or sags? Paint too diluted add undiluted material paint volume reduce the paint flow too high by turning fluid adjusting screw moving too slowly increase speed of application spray gun trigger being release trigger earlier held for too long spray gun too close increase the distance be...
Earlex ltd, opus park, moorfield road, guildford, surrey, gu1 1sz customer service: +44 (0) 1483 454666 e.Mail: enquiries@earlex.Co.Uk website: www.Earlex.Com copyright & design right reserved © 2010 hv7000 patent - gb 2429179 gun (type a) design registration - gb 3006933 © 2010 earlex products. N01...
