Earlex SPRAY SYSTEM HV 1900 Operating Instructions Manual - Notes

Manual is about: Earlex Spraystation HV1900 Operating instruction manual

Summary of SPRAY SYSTEM HV 1900

  • Page 1

    Operating instruction manual thank you for purchasing the earlex ® spraystation kit. This is a highly versatile spray kit and can be used for a variety of applications. Before use - please read the safety & operating instructions . Please retain for future reference earlex® ltd. Will accept no respo...

  • Page 2: Important Information

    2 important information (not supplied).

  • Page 3: Please Read Before Use

    3 safety operating instructions please read before use • never under any circumstances aim the nozzle at another person or animal. In the event of injury occurring seek expert medical advice immediately. • the spray gun must only be used with paints and solvents that have a suitable flash point for ...

  • Page 4: Exploded Parts View

    4 exploded parts view parts list no. Description part no. 1. Air cap ring l0215 2. Air cap l0205 3. Spray direction plate l0206 4. Fluid tip (2.0mm) l0237 5. Fluid tip seal l0211 6. Trigger pin l0209 7. Trigger l0202 8. Fluid needle (2.0mm) l0236 9. Spring l0216 10. Fluid adjusting screw l0210 no. D...

  • Page 5: Introduction

    5 introduction hvlp stands for high volume, low pressure. This is a type of spraying that allows you to spray extremely accurately but without all the overspray that occurs with the high pressure tank type equipment. In fact, in some parts of the world the high pressure systems are banned by law on ...

  • Page 6: Operation

    6 operation fill the paint container with the material to be sprayed. Do not fill above max level indicator. Push the fluid tube firmly into the base of the spray gun body. Screw the container onto the gun body tightly. Place the motor unit onto a clean surface, free from any loose debris or liquids...

  • Page 7: Helpful Hints

    7 helpful hints 1. Evenly control the speed of movement of the spray gun. A fast speed will give a thin coat and a slow speed will give a thick coat. 2. Stir paint well using paint stirrer (19). 3. Only apply one coat at a time. If a further coat is required follow the paint manufacturer’s instructi...

  • Page 8: Turbine Unit

    8 turbine unit the turbine unit only requires minimal maintenance. ● ensure the filter (18) is kept clean at all times. This can be washed out if necessary and replaced when dry. From time to time this filter will need replacing. ● the turbine bearings are sealed and lubricated for life. There is no...

  • Page 9: Mains Connection

    Mains connection this unit is a class ii appliance which means it is double-insulated for your protection, no earthing wire is necessary. If the supply cord is damaged, it must be replaced by earlex ltd or our appointed agents. Your unit has been supplied with a mains lead fitted with a fuse plug. T...

  • Page 10: Notes

    10 notes.

  • Page 11: Notes

    11 notes.

  • Page 12

    © 2012 earlex ltd. L0482 09/12 earlex limited, opus park, moorfield road, guildford, surrey, gu1 1sz, uk tel: +44 (0) 1483 454666. Fax: +44 (0) 1483 454548 www.Earlex.Com ec declaration of conformity we declare that the unit hv1900 conforms to: lvd 2006/95/ec, en60335-1, emf en62233; emc 2004/108/ec...