Front tine rototiller operator’s manual includes models 3100, 3200, 3365 badger series operating position om3100 rev. 01/28/04 © copyright 2004 ardisam, inc. All rights reserved. Printed in usa. Transport position.
2 ardisam.
3 ardisam model identification model identification ............................................. 3 warranty ................................................................... 4 safety rules ............................................................ 5 owner's responsibility .........................
4 ardisam warranty thank you . . . For purchasing an earthquake ® badger ™ front tine rototiller. We guarantee that this front tine rototiller conforms to applicable north american safety standards, and have worked to ensure that it will meet your exacting standards for usability and durability. Wit...
5 ardisam safety rules owner's responsibility safe and effective use of the rototiller is the owner's responsibility. 1. Read and follow all safety instructions. 2. Maintain the tiller according to directions and schedule included. 3. Ensure that anyone who uses the tiller is familiar with all contr...
6 ardisam safety rules operation • never operate the tiller without guards, covers, and hoods in place. • keep hands, feet, and clothing away from rotating parts. Keep clear of tiller tines at all times. • tines rotate when tiller is engaged in forward -- in forward , tines rotate when the drive saf...
7 ardisam safety rules safety decals this rototiller unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing. Although reading this manual and the safety instructions it contains will pro...
8 ardisam features drive safety control lever forward cable belt guard the advantage of the earthquake â badger ä gear drive rototiller over other front tine tillers, is the exclusive unfolding and flexible drag bar. This gives the earthquake â badger ä gear drive tiller its stability and its versat...
9 ardisam unpacking and assembly unpack tiller 1. Open top of carton and remove handlebar assembly. 2. Find parts packet. Parts packet contains: 6- 5/16-18 x 1-3/4” bolts 6- 5/16” spring lockwashers 2- hand knobs 4- locknuts 2- 1/2” push nuts 1- detent pin 3. Cut open end of carton and remove machin...
10 ardisam unpacking and assembly install the depth regulator lever 1. Install the depth regulator lever through hole in bracket from the bottom up with curve to rear of unit and secure with detent pin. Fill engine crankcase 1. Add oil according to engine manual. Do not overfill. Use a clean, high q...
11 ardisam controls drive safety control lever engage tines into forward, releasing returns machine to neutral. Pulling down on drive safety control lever engages the tines. Releasing the drive safety control lever disengages the tines to a neutral position. Drive safety control lever disengaged thi...
12 ardisam depth regulator lever tilling depth is controlled by the height of the depth regulator lever. To adjust tilling depth. 1. Remove detent pin. 2. Raise the depth regulator lever to position tines at chosen tilling depth. 3. Align hole in depth regulator lever with hole in depth regulator br...
13 ardisam start-up the controls required to start and run the rototiller are located on the engine and are marked "choke" and "throttle". A more detailed description of engine operation and all related precautions and procedures can be found in the engine manufacturer's manual that accompanies each...
14 ardisam tilling 1. Adjust the depth regulator lever to desired tilling depth. Note: raise depth regulator lever up one hole at a time, testing tiller operation after each raise. Raising depth regulator lever too high can result in loss of control of tiller! 2. Move the throttle control to fast . ...
15 ardisam normal care schedule your rototiller has been designed and produced by the industry's leading manufacturer of outdoor power equipment to provide you with years of reliable operation. Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performanc...
16 ardisam change forward belt 1. Turn off engine. Engine must be cool. 2. Remove spark plug wire from spark plug and secure. 3. Remove belt guard. ✮ remove the belt from the engine pulley: - gently pull the engine recoil rope to rotate the pulley. - with the pulley turning, force the belt out of th...
17 ardisam engine is shipped from factory without oil. You must add engine oil before starting engine. Normal care engine maintenance refer to the engine manual included in your parts packet for information on engine maintenance. Your engine manual provides detailed information and a maintenance sch...
18 ardisam prepare for storage follow the steps below to prepare your tiller for storage. Read your engine manual for detailed instructions on preparing the engine for storage. 1. Protect wheels and axles from rust: - coat the axles lightly with axle grease. 2. Run with gas stabilizer in fuel. 3. Dr...
19 ardisam troubleshooting guide while normal care and routine maintenance will extend the life of your rototiller, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly. The troubleshooting guide below lists the most common problems, c...
20 ardisam rev-012804 part # description qty. 504 lockwasher-spring, 5/16” ............................................................................................................................... 2 2104 nut-hex, 3/8”-16 ............................................................................
21 ardisam rev-012804 3100/3200/3365 motor mount & hood assembly part # description qty. 60g56 nut-biway lock, 5/16-18 ................................. 1 741 spacer, crankshaft, long, briggs ...................... 1 742 spacer, crankshaft, short, tec ........................... 1 744 spacer ..........
22 ardisam rev-012804 3100/3200/3365 tine & 1” shaft assembly part # description qty. 60g56 nut-biway lock, 5/16-18 ............................... 4 417 bolt-hx hd, 5/16-18 x 1/2”, gr 5 ................... 2 504 lockwasher-spring, 5/16” .............................. 7 747 spacer, 1” id x 1-1/4” od...
23 ardisam rev-012804 notes ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ____________________...
Ardisam, inc. 1690 elm street, cumberland, wisconsin 54829 (715)822-2415 • fax (715)822-4180 1-800-345-6007 www.Ardisam.Com.
