1. DL manuals
  2. EarthQuake
  3. Tiller
  4. 7055 6 HP BRIGGS
  5. Operating Instructions & Parts Explosions

EarthQuake 7055 6 HP BRIGGS Operating Instructions & Parts Explosions

Summary of 7055 6 HP BRIGGS

  • Page 1

    Ardisam .Com operating instructions & parts explosions srt rototillers omsrt07 rev. 2/5/07 © copyright 2007 ardisam, inc. All rights reserved. Printed in usa. 7055 6 hp briggs 7065v 6.5 hp viper 7155 6 hp briggs.

  • Page 2

    Operating instructions and parts explosions srt models page 800-345-6007 introduction thank you . . . For purchasing an earthquake® forward rotating rear-tine rototiller from ardisam, inc. We have worked to ensure that this rear-tine rototiller meets high standards for usability and durability. With...

  • Page 3

    Operating instructions and parts explosions srt models page 3 800-345-6007 safety owner’s responsibility accurate assembly and safe and effective use of the rototiller is the owner’s responsibility. • read and follow all safety instructions. • carefully follow all assembly instructions. • maintain t...

  • Page 4

    Operating instructions and parts explosions srt models page 4 800-345-6007 important the right and left sides of your rototiller are deter- mined from the operating posi- tion as you face the direction of forward travel. Engine is shipped from factory without oil. You must add en- gine oil before st...

  • Page 5: Place Free

    Operating instructions and parts explosions srt models page 5 800-345-6007 part no. Lbl516aa warning instructions hood decal part no. Lbl516c warning belt cover decal part no. Lbl516j tines danger hood flap decal safety decals this rototiller unit has been designed and manufactured to provide you wi...

  • Page 6: No Engine Oil!

    Operating instructions and parts explosions srt models page 6 800-345-6007 unpacking and assembly your rototiller comes fully assembled except for a few parts. The fol- lowing instructions will help you unpack your tiller and assemble and adjust your tiller’s depth regulator lever, cable tension and...

  • Page 7

    Operating instructions and parts explosions srt models page 7 800-345-6007 features all srt models forward drive safety control lever detent pin forward & reverse cable recoil start serial number plate wheel lock pin (model 7055, 7065v) or wheel lockout (model 7155) belt guard reverse drive safety c...

  • Page 8: Danger

    Operating instructions and parts explosions srt models page 8 800-345-6007 operation pre-start inspection 1. Make sure all safety guards are in place and all nuts and bolts are secure. 2. Check oil level in engine crankcase. See your engine manual for procedure and specifications. 3. Inspect air cle...

  • Page 9

    Operating instructions and parts explosions srt models page 800-345-6007 idle speed use the “low” position on the throttle lever to reduce stress on the engine when tilling is not being performed. Lowering the engine speed to “idle” will help extend the life of the motor, as well as conserve fuel an...

  • Page 10

    Operating instructions and parts explosions srt models page 10 800-345-6007 drive safety control levers forward lever engages wheels and tines into forward. Pulling the drive safety control lever labeled (forward) toward the handlebar engages the wheels and tines. Releasing the lever stops the wheel...

  • Page 11

    Operating instructions and parts explosions srt models page 11 800-345-6007 wheel lock pins (7055, 7065v) place wheels in tilling position. 1. Remove lock pin. Align hole in axle with hole in wheel hub. 2. Insert lock pin through holes, fold lock pin ring to secure pin to axle. 3. Firmly lock wheel ...

  • Page 12

    Operating instructions and parts explosions srt models page 1 800-345-6007 depth regulator lever tilling depth is controlled by the height of the depth regulator lever. To adjust tilling depth. 1. Remove detent pin. 2. Raise the depth regulator lever to position tines at chosen tilling depth. 3. Ali...

  • Page 13

    Operating instructions and parts explosions srt models page 13 800-345-6007 tilling tips the key to successful tilling is to begin with a shallow cut on the first pass, and then work an inch or two deeper on each successive pass. • tilling depth will vary with ground conditions. • when beginning to ...

  • Page 14

    Operating instructions and parts explosions srt models page 14 800-345-6007 servicing the rototiller the following information will help you make the necessary checks and perform the procedures required to follow the normal care recommendations made for your rototiller unit. If you prefer, your loca...

  • Page 15

    Operating instructions and parts explosions srt models page 15 800-345-6007 belt replacement part #’s: 727a (forward) 730 (reverse) change forward/reverse belt 1. Turn off engine. Engine must be cool. 2. Remove spark plug wire and secure from spark plug. 3. Remove belt guard. • remove the forward be...

  • Page 16: Important

    Operating instructions and parts explosions srt models page 16 800-345-6007 engine maintenance refer to the engine manual included in your parts packet for information on engine maintenance. Your engine manual provides detailed information and a maintenance schedule for performing the following task...

  • Page 17

    Operating instructions and parts explosions srt models page 17 800-345-6007 lubrication proper lubrication of moving mechanical parts is critical for proper care and maintenance. Oil the moving parts shown at 10 hour intervals using a 30 weight oil. Clean tine axle shaft 1. Turn off engine. Engine m...

  • Page 18

    Operating instructions and parts explosions srt models page 18 800-345-6007 troubleshooting and repair troubleshooting guide while normal care and routine maintenance will extend the life of your rototiller, prolonged or constant use may eventually require that service be performed to allow it to co...

  • Page 19

    Operating instructions and parts explosions srt models page 1 800-345-6007 problem remedy/action belts squeal in neutral and/or reverse • adjust forward belt guide: - turn engine off and allow muffler to cool - disconnect spark plug wire and secure from spark plug - remove belt guard - pull down on ...

  • Page 20

    Operating instructions and parts explosions srt models page 0 800-345-6007 srt handlebar parts explosion 53650(2) 53614 53613 53612 53620 53606(2) 53607(4) 503 53629 60g56 53630(2) 53624 2104(4) 48762(2) 53632 53631(2) 53679 90138(4) 90139(2) 53618(2) 2104(2).

  • Page 21

    Operating instructions and parts explosions srt models page 1 800-345-6007 srt handlebar parts list part # description qty. 2104 nut hex two-way 3/8-16 6 48762 bolt 3/8-16 x 1” carriage 4 503 bolt 5/16-24x1” hh gr5 1 53606 nut-nyloc, #10 2 53607 nut-jam, 5/16-24 4 53612 link 11-5/8” long 1 53613 lin...

  • Page 22

    Operating instructions and parts explosions srt models page 800-345-6007 srt tines & hood parts explosion 509(2) 415a 1501(4) 69170 394 1501(2) 1511(3) 1508 1507 2001(2) 1900rcrt 719(2) 2104(2) 1103(2) 1501 1710(2) 1500l, 1500p 53698 1507 1514 1515 48406 53640 1516(3) 740 804 803 504 802 727a 730 19...

  • Page 23

    Operating instructions and parts explosions srt models page 3 800-345-6007 srt tines & hood parts list part # description qty. 1103 lock pin 5/16” x 1-3/4” 2 1103a wheel lockout knob (7155) 2 1103b butterfly lockout (7155) 2 1103c snap ring 1/2” (7155) 2 1105 spring clamp w/ dowel (7155) 2 1439 flat...

  • Page 24

    Operating instructions and parts explosions srt models page 4 800-345-6007 srt motor mount parts explosion 53413 1501(4) 53623 810 504(2) wf516 743 803 731 804 741, 742 53642(6) 60g56(5) wf38(2) 2104(2) 53648 1501(4) 60g56(4) 53638 53649 1423(4) wf516 (4) 60501, 60365 2104 1408 wf38(2) 739 53682 481...

  • Page 25

    Operating instructions and parts explosions srt models page 5 800-345-6007 srt motor mount parts list part # description qty. 1407 forward arm spring 2 1408 forward pulley idler 2 1416 clevis pin 1 1418 cotter pin 5/64” x 1/2” 1 1423 bolt 5/16-18 x 2” 4 1501 bolt 5/16-18 x 3/4” 9 2104 nut 3/8-16 6 4...

  • Page 26

    Operating instructions and parts explosions srt models page 6 800-345-6007 srt wheel & tiller shaft parts explosion & parts list part # description qty. 1500l transmission complete, lockout (7155) 1 1500p transmission complete, lock pin 1 1506 seal-tiller housing 4 1601 bearing-tapered (includes con...

  • Page 27

    Operating instructions and parts explosions srt models page 7 800-345-6007 000 hiller/furrower kit installation (optional accessory)* thank you for purchasing a hiller/furrower attachment for your rototiller. You will be pleased with the many work saving uses you can accomplish with this handy tool....

  • Page 28: Ardisam

    Earthquake, division of ardisam, inc. 1690 elm street; p.O. Box 666 cumberland, wisconsin 54829 800-345-6007 · fax (715) 822-2223 e-mail: info@ardisam.Com ardisam .Com visit www.Ardisam.Com and discover more innovations that will benefit you throughout the year..