EarthQuake 9800 Series Operator's Manual

Other manuals for 9800 Series: Operator's manual, Operator's Manual
Manual is about: Two-Man Earth Auger Powerhead

Summary of 9800 Series

  • Page 1

    Om9800 revision 02/03/04 © copyright 2004 ardisam, inc. All rights reserved. Printed in usa. 2-person power earth auger operator’s manual includes model 9800

  • Page 2: One Year

    Ardisam page 2 one year limited warranty the ardisam, inc., manufacturing company warrants this earthquake model 9800 auger to be free from defects in material or workmanship. Conditions of this warranty include: what is covered under warranty: ardisam, inc. Will repair or replace any part defective...

  • Page 3: Safety

    Ardisam page 3 owner's responsibility accurate assembly and safe and effective use of the auger is the owner's responsibility. 1. Read and follow all safety instructions. 2. Carefully follow all assembly instructions. 3. Maintain the auger according to directions and schedule included. 4. Ensure tha...

  • Page 4: Operation

    Ardisam page 4 registration form complete and return. Your auger has a serial number decal located on side of engine directly above the carburetor. Record this number and the model number in the space provided on page 3 of this manual. You will need these numbers if you order parts. Fill out and mai...

  • Page 5: Operation

    Ardisam page 5 pre-start checklist 1. Read and understand the engine manual and operator's manual that came with your unit. 2. Fill oil sump or check oil level. Check oil level often during engine break-in. 3. Fill fuel tank. Use unleaded, regular gasoline. 4. Be sure spark plug wire is attached to ...

  • Page 6: Maintenance and Storage

    Ardisam page 6 maintenance and storage safety 1. Always allow muffler to cool before filling fuel tank. 2. When storing for over one (1) month, use gas stabilizer in fuel. 3. Do not fill gas tank indoors or when engine is running or is hot. 4. The gear case has four (4) oz. Of grease installed at th...

  • Page 7: Maintenance and Storage

    Ardisam page 7 storage maintenance and storage do not store auger with fuel in tank indoors or in enclosed, poorly ventilated areas, where fuel fumes may reach an open flame, spark, pilot light or an ignited object. Drain fuel outdoors away from any ignition sources. Use only approved fuel container...

  • Page 8

    Ardisam page 8 service, troubleshooting and repair service information at ardisam, we build quality and durability into the design of our products; but no amount of careful design by us, and careful maintenance by you, can guarantee a repair- free life for your auger. Most repairs will be minor, and...

  • Page 9: Caution

    Ardisam page 9 troubleshooting problem possible cause remedy/action engine will not start 1. Flip switch to on position 2. Connect spark plug wire to spark plug engine runs rough, floods during operation 1. Dirty air cleaner 2. Carburetor out of adjustment 1. Clean or replace air cleaner 2. Take to ...

  • Page 10: Earthquake Model 9800

    Ardisam page 10 earthquake model 9800

  • Page 11: Earthquake Model 9800

    Ardisam page 11 minimum order ...................................................................................................................... $10.00 earthquake model 9800 part # description qty. 8935 bolt-shcs, 1/4-20 x 2-1/2" 4 (gear case to handlebar plate) 9016 clutch drum 1 9211 handle gr...

  • Page 12

    Ardisam ardisam, inc. 1690 elm street; p.O. Box 666 cumberland, wisconsin 54829 phone (715) 822-2415 fax (715) 822-4180 1-800-345-6007 www.Ardisam.Com.