1. DL manuals
  2. EarthQuake
  3. Power Tool
  4. EQ12 XT-20V
  5. Owner's Manual & Safety Instructions

EarthQuake EQ12 XT-20V Owner's Manual & Safety Instructions

Manual is about: 1/2’’ & 3/8’’ CORDLESS XTREME TORQUE IMPACT WRENCH

Summary of EQ12 XT-20V

  • Page 1

    Visit our website at: http://www.Harborfreight.Com email our technical support at: productsupport@harborfreight.Com owner’s manual & safety instructions save this manual keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Wr...

  • Page 2: Table Of Contents

    Page 2 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p table of contents safety ......................................................... 2 specifications ............................................. 7 setup ..............................

  • Page 3: Electrical Safety

    Page 3 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p electrical safety do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Personal safety 1. Stay alert, watch wha...

  • Page 4: Battery Tool Use and Care

    Page 4 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p battery tool use and care 1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when use...

  • Page 5: Vibration Safety

    Page 5 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p lithium battery safety warnings lithium batteries store a large amount of energy and will vent fire or explode if mistreated: 1. Keep battery pack dry. 2. Do not do any of the follo...

  • Page 6: Extension Cords

    Page 6 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p grounding to prevent electric shock and death from incorrect grounding: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not ...

  • Page 7: Functions

    Page 7 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p specifications battery rating 20 v / 4.0 ah battery type li-ion impact rate 63536: 0 – 3000 ipm 63852: 0 – 2200 ipm anvil size 63536: 3/8" 63852: 1/2" setup - before use: read the e...

  • Page 8: Tool Set Up

    Page 8 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p operating instructions read the entire important safety information section at the beginning of this manual including all text under subheadings therein before set up or use of this...

  • Page 9

    Page 9 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p general operating instructions 1. Make sure that the trigger is in the off-position and the direction switch is in the centered, trigger lock position, then attach the battery pack....

  • Page 10

    Page 10 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p maintenance and servicing procedures not specifically explained in this manual must be performed only by a qualified technician. T o prevent serious injury from accidental operatio...

  • Page 11: Troubleshooting

    Page 11 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p troubleshooting problem possible causes likely solutions tool will not start. 1. Battery pack not properly connected. 2. Battery pack not properly charged. 3. Battery pack worn out...

  • Page 12: 63536 Parts List

    Page 12 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p part description qty 1 enclosure 1 2 rear cover 1 3 direction switch 1 4 led cover 1 5 panel 1 6 screw 10 7 screw 4 8 buffer 1 9 washer 1 10 front cover 1 11 anvil 1 12 o-ring 1 13...

  • Page 13: 63536 Assembly Diagram

    Page 13 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p 63536 assembly diagram.

  • Page 14: 63852 Parts List

    Page 14 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p part description qty 1 enclosure 1 2 direction switch 1 3 panel 1 4 led cover 1 5 screw 9 6 screw 4 7 soft pad 1 8 front cover 1 9 washer 1 10 needle roller bearing 1 11 anvil 1 12...

  • Page 15: 63852 Assembly Diagram

    Page 15 for technical questions, please call 1-888-866-5797. Item 63536 63852 safet y op era tion m aintenan c e setu p 63852 assembly diagram.

  • Page 16

    3491 mission oaks blvd. • po box 6009 • camarillo, ca 93011 • 1-888-866-5797 limited 90 day warranty harbor freight tools co. Makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in ma...