EarthQuake Nova FF12 Operation Manual & Technical Manual - Specifications & Performance

Other manuals for Nova FF12: Operation Manual

Summary of Nova FF12

  • Page 1

    Nova power from the heavens nova ff12 front firing powered subwoofers operation manual & technical guide www.Earthquakesound.Com sound that will move you..

  • Page 2

    -2- five (5) years limited warranty. Earthquake warrants the original purchaser that all factory sealed new audio products to be free from defects in material and workmanship under normal and proper use for a period of five (5) years from the date of purchase (as shown on the original bill of sale w...

  • Page 3: Notes and Warnings

    Warning: this product is capable of generating high sound pressure levels. You should exercise caution when operating these speakers. Long term exposures to high levels of sound p r e s s u r e w i l l cause permanent damage to your hearing. Sound pressure levels exceeding 85db can be dangerous w i ...

  • Page 4: Specifications & Performance

    Specifications & performance -4- spl vs freq. Typical near field measurements specifications performance power: 400 watts frequency response: 20-125hz dimensions (hxwxd): height = 19.5" / 495.3mm (including legs) width = 14" / 355.6mm depth = 16.125" / 409.575mm (including amplifier controls) weight...

  • Page 5: Product Overview

    Product overview class "a/b" amp * 400 watts class "ab" , high efficiency power amplifier. * 24 db / octave variable filter from 40 hz to 180 hz. * automatic signal detection circuitry, when "on", it automatically turns on the subwoofer when an audio signal is detected. It also shuts the subwoofer o...

  • Page 6: Positioning Your Subwoofer

    Positioning your subwoofer -6- ff12 subwoofer more bass output; least even bass response ff12 subwoofer moderate bass output; more even bass response ff12 subwoofer lowest bass output; most even bass response subwoofer placement there is no argument among audio professionals that the loudest bass ou...

  • Page 7: Connecting Your Subwoofer

    Connecting your subwoofer -7- av receiver, integrated amp, pre-amp or processor connections to a if your pre-amplifier, receiver etc. Has a subwoofer output (often labeled lfe for low frequency effects), it can be connected to the subwoofer's left (mono) input as shown. This is the simplest and reco...

  • Page 8

    Sound that will move you. 2727 mccone avenue hayward, ca 94545, phone: 800•576•7944 fax: 510•732•1095.