EarthQuake SWAT 2.4 User Manual - Caution

Important Safety Instructions

1)   Read these instructions in their entirety.

10)   Protect the power cord from being walked on or pinched,

        particularly at plugs, convenience receptacles, and the pint

2)   Store this manual and packaging in a safe place.

        where they exit from the apparatus.

3)   Heed all warnings.

11)   Only use attachments & accessories specified by the

        manufacturer.

4)   Follow instructions (do not take short cuts).

12)   Use only compatible rack or cart for final resting position.

5)   Do not use this apparatus near water.

13)   Unplug this apparatus during lighting storm or when unused

6)   Clean only with a dry cloth.

        for long period of time.

7)   Do not block any ventilation openings. Install in accordance

14)   Refer all servicing to qualified service personal. Servicing is

      with the manufacturers instructions.

        required when the apparatus has been damaged in any way

        such as; power-supply cord or plug is damaged, liquid has

8)   Do not install near any heat sources such as radiators, heat

        been spilled or objects have fallen into the apparatus, the

      registers, stoves, or other apparatuses that produce heat.

        apparatus has been exposed to rain or moisture, does not

        operate normally, or has been dropped.

9)   Do not defeat the safety purpose of the polarized or

      grounding-type plug. A polarized plug has two blades with

15)   To reduce the risk of fire or electric shock, do not expose

      one wider that the other. A grounding-type plug has two

        this apparatus to rain or moisture.

      blades and a third grounding prong. The wide blade or the

      third prong is provided for your safety. If the provided plug

      does not fit into your outlet, consult an electrician for

      replacement of the obsolete outlet.

This triangle, which appears on your component,

alerts you to the presence of uninsulated,

dangerous voltage inside the enclosure -

voltage that may be sufficient to

constitute a risk of shock.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This triangle, which appears on your component,

alerts you to important operating and

maintenance instructions in this

accompanying literature.

SWAT-2.4 Manual     3 

SWAT-2.4 Manual     4 

Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com

•  Keep all power cords away from all signal cables to prevent 

humming from induced noise.

•  Choose reliable signal cables cords (Earthquake Sound also 

specializes in high-performance RCA cables and patches).

•  All speaker wires that are ran through the walls should be twisted 

type to reduce potential hum noise pick up.

•  Label both ends of all wires with the corresponding room 

location.

•  It is best to use a grounded electrical outlet to power the 

amplifier. Lack of input ground reference could be unsafe. 

Consult with your electrical contractor about proper grounding.

Unpacking system components

There are several factors to consider before installing Earthquake 

Sound’s SWAT 2.4.

•  What are the intended listening zones?

•  What system options and accessories might be required for 

features such as local sources, etc.?

•  From where in each zone will the listener prefer to control the 

system? Where will the remote gains be located? Where will the 

speakers be located?

•  Where will the source equipment be located?

System installation considerations

Connection tips

 •  Keep the original carton and packing materials for future 

shipment or storage.

•  Check for any visual signs of damage. If you encounter any 

concealed damage, consult your Earthquake Sound dealer 

before proceeding with unit installation.

•  Retain the sales receipt as it established the duration of the 

limited warranty and provided information for insurance 

purposes.

Specifications are subject to change without notice.