EarthWise CST00012 Operator's Manual - page 6
MAINTENANCE
CAUTION: Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils, etc., come in
contact with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
Make sure the battery is detached from the unit, then use
only mild soap and a damp cloth to clean the tool. Never let
any liquid get inside the tool; never immerse any part of the
tool into a liquid.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals Do not store the
tool on or adjacent to fertilizers or chemicals.
IMPORTANT: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment should
be performed by an authorized service center or other
qualified service organization, always using identical
replacement parts.
If you drop the trimmer, carefully inspect it for damage. If the
blade is bent, housing cracked, or handles broken or if you
see any other condition that may affect the trimmer’s
operation, contact your local Authorized Service Center for
repairs before putting it back into use.
TROUBLESHOOTING
Problem
-Unit does not run
- Line won’t feed
- Line fails to cut off
- Battery will not charge
Possible Cause
- Battery not making contact
- Lock off not fully operated
- Battery not installed properly
- Battery not charged
- Line tangled in spool
- Line cutter in guard is damaged or missing
- Battery not inserted into charger
- Charger not plugged in
- Surrounding air temperature too hot or too cold
Possible Solution
- Check battery is fully inserted
- Check that lock off is fully forward prior to
moving trigger
- Check battery installation
- Check battery charging requirements
- Unwrap 24” of line and rewind
- Replace guard
- Insert battery into charger until red LED appears
- Plug charger into a working outlet
- Check current at receptacle by plugging in a
lamp or other appliance
- Check to see if receptacle is connected to a
light switch which turns power off when you
turn out the lights
- Move charger and tool to a surrounding air
temperature of above 40 degree F
(4,5 degree C) or below 105 degree F
( +40,5 degree C)
Call us first with questions about operating or maintaining your string trimmer
at 1.800.313.5111 between 7:30 a.m. – 4:30 p.m. Eastern Standard Time,
or send emails to earthwise@reelin.com.
CALL US FIRST !!