Version 1, november 25th, 2008.
Congratulations on your purchase of the innovative earthworks high definition microphone™ flexwand™ system. We know you will be thrilled with the results you achieve using the flexwand™ system for both live performance and recording. Items enclosed with your new earthworks flexwand™ system: flexwand™...
Identification of the flexwand™ elements in this manual we will refer to the various elements of the flexwand™ system. In figure 1 all of the elements of the flexwand™ system are identified. Please review this information so you are familiar with the various elements and terminology associated with t...
3 figure 1. The flexwand™ elements 3 patent pending 30khz microphone head mini-flex sleeve clutch wand 0.25” in diameter sleeve mating coupler large flex stand 0.75” in diameter microphone electronics section xlr connector base 12 lb..
Using the flexwand™ as a boom in the “boom mode” the flexwand™ can mike anything just like a conven- tional microphone on a boom stand. This can be used when you want the flex- wand microphone lower for such applications as small vocal groups, vocal solos or musical instruments (see figures 5, 6, 9,...
Figure 11. Using the wand as a boom. 5 figure 8. Figure 9. Figure 7. The highly versatile flexwand™ high definition microphone system is a uniquely creative tool that will provide outstanding sonic results for virtually any recording or live sound applica- tion. It’s low profile with no visible wire...
6.
7 about high definition microphones™ during the last decade it has become commonplace for sound recording and broadcast equipment to accommodate extended frequency responses up to and beyond 100khz. With few exceptions, even the very best of conventional professional microphones do not offer frequen...
8 fw730 & fw730/hc (cardioid & hypercardioid) frequency response: 30hz to 30khz ±2db @ 6 inches polar pattern: cardioid or hypercardioid sensitivity: 10mv/pa (-40dbv/pa) power requirements: 48v phantom, 10ma max acoustic input: 145db spl output connector: female xlr-3 (pin 2+) min output load: 600 o...
Warranty all earthworks ® products carry a two-year limited warranty (parts and labor). If you have any problems with your earthworks products, please contact our warranty/repair department by email at: returns@earthworksaudio.Com or by telephone at (603) 654-6427, ext 20..
Patent pending • made in u.S.A. Earthworks, inc. 37 wilton rd. Milford, nh 03055 603-654-6427, ext. 14 www.Earthworksaudio.Com printed in u.S.A..
