1. DL manuals
  2. East Coast Datacom
  3. Receiver
  4. DBU-V11
  5. Installation And Operation Manual

East Coast Datacom DBU-V11 Installation And Operation Manual

Summary of DBU-V11

  • Page 1

    3 forced indicate to input port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 equipment grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 cascading and termination resistors . ...

  • Page 2: Operations Manual

    Operations manual data broadcast unit dbu-v.11 june 05, 2000 manufactured by : east coast datacom, inc. For technical support call: east coast datacom, inc. 245 gus hipp blvd, ste 3 rockledge, fl 32955 tel: (800) 240-7948 or (321) 637-9922 fax: (321) 637-9980 web site: www.Ecdata.Com pt # 719014-b.

  • Page 3: Safety Warning

    Safety warning always observe standard safety precautions during installation, operation and maintenance of this product. To avoid the possibility of electrical shock, be sure to disconnect the power cord from the power source before you remove the iec power fuses or perform any repairs. Proprietary...

  • Page 4: Emissions Requirements

    Emissions requirements fcc class a note : this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a com...

  • Page 5: Chapter 1 - Description

    Chapter 1 - description the dbu-v11 is designed for use in receive only data broadcast applications. Examples of typical data broadcast applications are; continuously updated private or public data displays and distribution of continuous data to pc's or receive only printers. The expanding role of v...

  • Page 6: Chapter 2 - Basic Operation

    1-1 chapter 2 - basic operation operation of the dbu-v11 is as simple as plugging a male db-15 cable into the female db-15 input port on the back panel and plugging up to eight male db-15 connectors into ports 1 - 8. Data, clock and indicate are received on the master port and are broadcast out simu...

  • Page 7: Power Connection

    Chapter 3 - setup and installation power connection it is very important to check that the unit is set to the correct voltage setting for your application before applying ac power. Located on the rear of the unit you will find a rotary 110/220 vac switch. Using a coin or small screwdriver, gently tu...

  • Page 8

    Jumper jmp5 provides for forcing indicate high to the input port. Strap chart east coast datacom, inc., dbu-v11 installation and operations manual page 4.

  • Page 9: Technical Specifications

    Technical specifications applications front panel multiple synchronous broadcasting of indicator: power, data, clock and data, clock and indicate indicate capacity power requirement one to eight sub-channels; standard 100-120/200-220 vac @+10%, 47 db-15 pin (female) interface connector to 63 hz, 7 w...

  • Page 10: Notes:

    Notes: east coast datacom, inc., dbu-v11 installation and operations manual page 6.