Fold ‘n store ™ table tennis table assembly instructions model 1-1-33610 contact info hours monday to friday (9am to 5pm est) technical support email us at: consumerservice@eastpointsports.Com visit us at: www.Eastpointsports.Com call: 973-585-4747 www.Eastpointsports.Com patent - www.Eastpointsport...
1 contact info hours monday to friday (9am to 5pm est) technical support email us at: consumerservice@eastpointsports.Com visit us at: www.Eastpointsports.Com call: 973-585-4747 important - lay out all parts before you begin • please review the parts identifier and make sure that you have all parts ...
2 before building - please inspect your playfield your table game playfield is not replaceable. Any damage that exists to your playfield is not reparable under warranty. If your playfield is damaged, the entire game must be returned to the original place of purchase for an exchange. Please attach re...
No tool required! Tools how to use the parts identifier before you begin assembly, please make sure that you have all the parts listed and in the correct quantities. This will ensure the quickest and most organized assembly. Be sure to work on the assembly on a soft non-marring surface such as carpe...
Pre-installed parts x8 linkage tube - short 33610-09394 pre-installed 9 x4 cross bar - spring lock 33610-10394 pre-installed 10 x4 linkage tube - long - spring lock 33610-11394 pre-installed 11 x4 linkage tube - long - spring lock - insert nut 33610-12394 pre-installed 12 x4 corner cap 33610-13394 p...
Pre-installed hardware x12 screw - corner cap 33610-72394 pre-installed 72 x4 screw - storage bag 33610-73394 pre-installed 73 x12 screw - handle 33610-74394 pre-installed 74 5 before building - please inspect and layout all your parts start all parts are listed in the parts identifier and accessori...
6 one adult should hold up the table. Unclip the lock on the handle. Swing open each side of the table. Remove the contents from the storage bag. Note: step 3 with 2 strong adults flip the table in the air as shown. Do not pivot table on corners to rotate. Important: make sure that the end of the ta...
7 step 5 - cross bar assembly warning: the cross bar must be locked across to the other leg assembly before the long linkage tubes are locked in place. This is required for structural stability. Unscrew the cross bar from the linkage tube. Swing the cross bars over to the other side’s long linkage t...
8 step 6 - long linkage tube assembly with 2 strong adults flip the table in the air as shown. Repeat steps 1 through 7 for the second half of the table. Note: step 7 important: do not proceed to step 9 until steps 5a - 5c are completed . A b do not lean table on legs! Align all 4 spring locks to th...
9 align each end of the table together as shown. Important: the ends without the apron and corner caps must face each other. Note: step 8 slide the table tennis net posts onto the table. Then, tighten the clamps to secure the posts’ position on the table. Note: step 9 components qty. Post - table te...
10 slide the table tennis net onto the table tennis net posts. Note: step 10 components qty. Table tennis net x1 81 note: step 11 have fun! Consult rule book for game rules for table tennis. 81.
1-1-33610 im 185.189 limited warranty as described in and as limited by this limited warranty, eastpoint sports ltd., llc (the “company”) warrants this product to be free from defects in workmanship and materials for a period of 90 days from the date of original purchase. The term defects shall mean...
