Versa-cut plasma cutter assembly & operating instructions part #12740
2 eastwood technical assistance: 800.544.5118 >> techelp@eastwood.Com specifications our eastwood-designed versa-cut plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 3/8”. Compared to mechanical cutting, our ve...
To order parts and supplies: 800.345.1178 >> eastwood.Com 3 safety information flammability hazard • before beginning, make sure the work surface is cleaned of any oils, coatings or other materials which can ignite and or emit dangerous fumes or vapors. • molten metal is ejected away from the cuttin...
4 eastwood technical assistance: 800.544.5118 >> techelp@eastwood.Com required items before you begin using the eastwood versa cut plasma cutter make sure you have the following: • a clean, dry air supply source for the torch. An air compressor capable of delivering 5-7 cfm @ 60 psi is required. You...
To order parts and supplies: 800.345.1178 >> eastwood.Com 5 set-up • after the desired current source is determined, be sure the proper plug is used and the appropriate circuitry and breakers are in place. • do not plug unit in at this time and make sure the power switch on the left side of the fron...
6 eastwood technical assistance: 800.544.5118 >> techelp@eastwood.Com operation 1. Before attempting to use this unit on an actual project or object of value, practice on a similar material as there is a moderate learning curve necessary before achieving proficiency in cutting. 2. Place the ground c...
Care and maintenance • it is extremely important that the air supply be clean and dry. A seprate moisture trap, water/oil separator or desiccant system should be used. The versa-cut plasma cutter has a built-in “last-chance” moisture separator which requires draining each time you have completed wor...
© copyright 2012 easthill group, inc. Instruction part #12740q rev. 6/12 if you have any questions about the use of this product, please contact the eastwood technical assistance service department: 800.544.5118 >> email: techelp@eastwood.Com the eastwood company 263 shoemaker road, pottstown, pa 19...
