Versa-cut 60 plasma cutter assembly & operating instructions (pdf version available at eastwood.Com/14099manual) part #14099.
Specifications the eastwood-designed versa-cut 60 plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 7/8”. Compared to mechanical cutting, our versa-cut 60 plasma cutter works signifi cantly faster, and makes cur...
To order parts and supplies: 800.345.1178 >> eastwood.Com 3 safety information read instructions! • thoroughly read and understand this instruction manual before using the plasma cutter. • keep this instruction booklet electric shock can kill! • improper use of a plasma cutter can cause electric sho...
4 eastwood technical assistance: 800.544.5118 >> techelp@eastwood.Com arc rays can burn! • use a shield with the proper fi lter (a minimum of #11) to protect your eyes from sparks and the rays of the arc when cutting or when observing open arc cutting (see ansi z49.1 and z87.1 for safety standards)....
Required items before you begin using the eastwood versa-cut 60 plasma cutter make sure you have the following: • a clean, dry air supply source for the torch. An air compressor capable of delivering 5-7 cfm @ 60 psi is required. You can even use a portable air tank with regulator. The air supply mu...
Operation 1. Before attempting to use this unit on an actual project or object of value, practice on a similar material as there is a moderate learning curve necessary before achieving profi ciency in cutting. 2. Place the ground cable clamp on a clean, bare area of your workpiece. Scrape, wire brus...
Care & maintenance • it is extremely important that the air supply be clean and dry. A separate moisture trap, water/oil separator or desiccant system should be used. The versa-cut 60 plasma cutter has a built-in “last-chance” moisture separator which requires draining each time you have completed w...
© copyright 2014 easthill group, inc. Instruction part #14099q rev. 12/14 if you have any questions about the use of this product, please contact the eastwood technical assistance service department: 800.544.5118 >> email: techelp@eastwood.Com pdf version of this manual is available online >> eastwo...
