Easy Comp PM50 Instructions Manual - Grounding Instructions
6
gRoUNdiNg iNStRUctioNS
The product should be grounded. in the event of an elec-
trical short circuit, grounding reduces the risk of electrical
shock by providing an escape wire for the electrical current.
This product is equipped with a cord having a grounding
wire with a grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded.
dANgER
improper use of the grounding plug can result in a risk of
electrical shock.
WARNiNg
ground reliability can only be achieved when the power
cord is connected to an equivalent receptacle marked
“Hospital grade”.
oPERAtiNg iNStRUctioNS
WARNiNg
Read this User manual before installing or operating the
easy comp compressor.
cAUtioN
inspect the easy comp compressor for visual damage,
Do NoT USe if damaged.
1. Place easy comp compressor near a properly grounded
electrical receptacle on a table, floor or other horizontal ,
smooth, hard surface.
Allow a minimum of 4 in. (10 cm) clearance on all sides
to ensure adequate air flow for cooling of product.
2. Press down on product until Suction Feet are secure.
3. Be sure the on/off Switch is in the “oFF
” position.
4. Plug the compressor into a properly grounded receptacle.
5. Attach appropriate device to the outlet Fitting, securely,
without overtightening.
6. Press the on/off Switch to the “oN