Summary of CyberScanner P500
Page 1
Photo scanner p500 user’s manual.
Page 2: For Customers In Usa
For customers in north and south america for customers in usa this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference th...
Page 3: 1. Name of Parts
1. Name of parts 1. Photo slot 2. Snap shot / copy button 3. Power led 4. Usb cable 5. Photo tray -2-.
Page 4: System Requirements
Z system requirements this photo converter supports windows xp and vista (32-bits) via usb 2.0 only. A. First insert the photo in to the appropriately sized photo tray. B. Open the photo tray slot. C. Insert the tray in to the photo tray slot. -3-.
Page 5
2. Installing the driver and software to use this photo converter you must install the photo converter driver and arcsoft photoimpression 6 first. Note: do not connect the photo converter to the computer while installing the driver. Main menu • installing the driver and software for windows xp 1. Tu...
Page 6
3. 2. Click install. 3.3. Installation process will begin. 3.4. Once installation is complete. Click finish. -5-.
Page 7
4. Take out the installation disk and restart the computer. Insert the installation disk again and click on arcsoft software. 4.1. Select the language you wish to be displayed. Then click ok. 4.2. Photoimpression will start the installation. 4.3. Click on yes to agree to the terms and conditions. -6...
Page 8
4.4. Click next to have photoimpressions download into your programs folder. 4.5. Click next to continue. 4.6. Photoimpressions will start the setup process. -7-.
Page 9
4.7. Once you get this to this screen select "clear all" so that photoimpressions does not take over the files on your computer. -8- 4.8. Click on finish to complete and restart the computer. 5. Restart the computer and take out the installation disk. Then connect the photo converter to your compute...
Page 10
5.1. Do not insert the disk into the drive and select "install the software automatically" (the driver is already installed; there is no need for the driver disk.) 5.2. The found new hardware wizard will automatically look for the driver in your computer to synch the hardware. When the windows warni...
Page 11
• installing the driver and software for windows vista 1. Turn on the computer. 2. Insert the installation cd into the cd-rom drive and the main menu will appear. 3. Installation for windows vista, follow the steps below: 3.1. Click on install driver to start installation. 3.2 click next to start th...
Page 12
3.5 once installation is complete. Click finish. 4. Take out the installation disk and restart the computer. Insert the installation disk again and click on arcsoft software. 4.1. Select the language you wish to be displayed. Then click ok. 4.2. Photoimpression will start the installation. -11-.
Page 13
4.3. Click on yes to agree to the terms and conditions. 4.4. Click next to have photoimpressions download into your programs folder. 4.5. Click next to continue. -12-.
Page 14
4.6. Photoimpressions will start the setup process. 4.7. Once you get this to this screen select "clear all" so that photoimpressions does not take over the files on your computer. 4.8. Click on finish to complete and restart the computer. -13-.
Page 15
5. Restart the computer and take out the installation disk. Then connect the photo converter to your computer and follow the steps below to synch up the hardware with the software. 5.1. Do not insert the disk into the drive and click select “locate and install driver software (recommended).” 5.2. A ...
Page 16: 3. Using Photoimpression 6
You are now ready to start using your photo converter to start converting your photographs to digital images. 3. Using photoimpression 6 1. Double click on the “photoimpression 6” icon on the desktop and you will see the following: follow the instructions to open the software. Pic1 pic2 for first ti...
Page 17
Pic3 select the location to save the pictures. Note: try to use the calibrate function before each use. (except the first use, it calibrates automatically.) this helps the light in the converter adjust. Make sure there is nothing in the converter during this process. Pic4 you can adjust the location...
Page 18
Keyboard and hold it to select more than one picture on the film strip. Then press the transfer button to transfer or save the selected pictures to your computer. Note: to ensure the best image quality, please allow about 5-10 seconds between snapshots and transfers for white balance enhancement. No...
Page 19: - Main Menu
-18- 4. Editing pictures with photoimpression 6 first, click once on the picture to select, then use the arcsoft editing tools to edit the pictures. - main menu the main menu appears in the upper left corner of the workspace. Many of the program's key options and controls are available in the main m...
Page 20: * View
Documents, my pictures and desktop. • scan all folders - scans your entire computer for media (except windows and program files folders). • select the folders you want to scan - allows you to choose the folders for scanning. * view full screen/play (f4) plays or displays the first selected file in f...
Page 21: * Edit
-20- here you can: • acquire images from connected twain compliant devices such as scanners and some digital cameras. • assign names to image files as they are acquired (using today's date or a descriptive word). How to acquire images from a twain compliant device: 1. Select a scanner or other twain...
Page 22: Enhance
The window can be stretched to provide a large size view of the active photo. Double click the module's tool bar to maximize the window to fill the computer screen. In addition to the large photo workspace, the photo editing tools module includes five distinct sets of controls: enhance the enhance f...
Page 23: Color
Color this feature is designed to fix digital photos that have unnatural color or appear too dark. It's also great for fixing scanned versions of old prints that have faded or whose colors have changed after many years. How to fix the color of a photo: 1. Drag the color balance sliders to make the p...
Page 24: Manual Fix
-23- manual fix 1. Use the zoom slider on the toolbar to zoom in on the photo. 2. Drag the small white box inside the zoom navigator to move over a red eye. 3. Place your cursor directly over the red eye and click. 4. Repeat the process until all the red eyes are fixed. 5. Click "undo" if you make a...
Page 25: Straighten
-24- straighten this feature enables you to fix photos that appear to be tilted. How to use straighten: 1. Move the slider (or click the rotate buttons) until the photo appears straight. 2. Use the superimposed grid lines for vertical and horizontal reference. 3. Click "apply" if you like the result...
Page 26: Saving Your Results
Saving your results when you're done editing a photo, click save as to save your results. You can choose to overwrite the original file or save a new one. Click "close" to exit the photo editing module. Retouch healing brush the healing brush is good for fixing dust, scratches and removing skin blem...
Page 27: Lighten/darken
How to use the clone tool to remove a telephone pole from the background of a photo: 1. Establish a source point for the clone tool by holding the shift key and clicking on an area of the sky that you want to use to paint over the telephone pole. 2. Adjust the brush size so the cursor (circle) is on...
Page 28: Sharpen
Sharpen sharpen blurry areas. Click and drag the sliders below to change the brush size and transparency. Blur smooth out rough areas. Click and drag the sliders below to change the brush size and intensity. Paint brush allows you to "paint" on your image when you click and drag the mouse. Click and...
Page 29: Saving You Results
-28- saving you results when you're done, click "save as" button to save your results. You can overwrite the original file or save it as a new one. Or click "cancel" to exit without saving. Click "close" to exit the photo editing module. Note: for more detailed information, please refer to the [help...
Page 30: 4. Specification
4. Specification interface: usb 2.0 image sensor: 5 mega pixel cmos sensor lens: fno= 3.0 , 4 glass elements, view angle 54 。 frame rate (max): 5 mega pixel (2592x1800) 2 fps focus range: fixed focus exposure control: automatic color balance: automatic scan high resolution 5 mega pixel equals to 180...