Easy PocketNAV.com OnCourse Navigator 4 User Manual - page 36
User's manual OnCourse Navigator | 4
Operating the navigation software
- 34 -
Points of Interest nearby
Notice: You may only display Points of Interest nearby when the
GPS receiver is connected and when your current position can be
determined.
Selecting a Point of
Interest nearby...
2. On the P
OINT OF INTEREST
screen, tap the Nearby button.
The P
OINT OF INTEREST NEARBY
screen opens:
3. Enter the radius around your current position within which
you want to search for Points of Interest into the Radius
entry field.
4. Select the main category of Points of Interest to search for
from the left one of the two Category list fields, e.g.
“Garages”. Only Points of Interest situated within the
indicated radius will be displayed.
5. Select the sub-category of Points of Interest to search for into
the right one of the two Category list fields, e.g. "BMW",
"Ford", "DaimlerChrysler".
Notice: If you leave the Sub-category field empty, all Points
of Interest matching with the selected main category will be
listed in the Point of Interest list field.
6. Select the correct destination from the Point of Interest list
field.
All Points of Interest matching your entries are listed,
including their linear distance from your current position:
7. Tap the Save button if you want to navigate more often to
the selected destination. You may then quickly select it from
the Saved destinations list.