Easy Weigh PC-100 Owner's Manual

Other manuals for PC-100: Owner's Manual
Manual is about: PRICE COMPUTING SCALE

Summary of PC-100

  • Page 1

    Easy weigh o w n e r ’ s m a n u a l model: pc-100 price computing scale ver 2.20 ®.

  • Page 2

    Table of contents specifications .......................................................... 1 nomenclature ......................................................... 1 function keys .......................................................... 2 display .....................................................

  • Page 3

    1 specifications model: pc-100 maximum capacity: 30 / 60 lb dual range minimum graduation: dual range 0 to 30 lb x 0.01 lb / 30 to 60 lb x 0.02 lb maximum tare: half capacity 0 to 29.99 lb internal resolution: 60,000 counts (minimum) a/d conversion rate: 9 updates / second direct plu keys: standard ...

  • Page 4

    2 ~ function keys numeric keys, used to enter pricing data, tare, programming, etc. Clear key, used to release error conditions and to clear erroneous entries. Zero key, used to manually set the zero point. Tare key, used to enter tares and clear tares. Save key, used to disable the price / tare aut...

  • Page 5

    3 memory write, used to program plus. Memory read, used to call-up plus. 1/2 key, used to price items by the half pound. (this key is not allowed in some states.) 1/4 key, used to price items by the quarter pound. (this key is not allowed in some states.) ¿ key, reserved for future use. Direct plu k...

  • Page 6

    4 unpacking & assembly your pc-100 scale should come with the following: no parts name units qty 4-1 in carton box ea 1 4-2 styrofoam ea 2 4-3 body poly bag ea 1 4-4 manual poly bag ea 1 4-5 ac cord ea 1 4-6 manual ea 1 4-7 pan screws , pole model only ea 4 4-8 cal sealing bolts ea 2 4-9 fuse ea 1 4...

  • Page 7

    5 once you have unboxed your pc-100 you must determine whether you have a pole or standard display model. If you have a standard display model, simply connect the power cord to the scale and then to a 110 vac 60 hz outlet. If you have pole display model follow the instructions below on how to assemb...

  • Page 8

    6 operating the scale make sure the platter is sitting properly on top of the platform and that there is nothing on top of the platter. Also, make sure that the scale is plugged into the proper outlet. Place the power switch into the on position. The scale displays will run through a self test, coun...

  • Page 9

    7 steps 2 and 4 can be interchanged. Once you press the tare key you will notice that the net light will come on indicating to you that the weight shown is a net weight. For example: after you place an item on the scale and enter a price the displays may look like this: after step 5 you will notice ...

  • Page 10

    8 weighing using direct plus: 1. Press the direct plu key on the keyboard and change the price if desired. 2. Place an item on the platter 3. Remove the item from the platter steps 1 and 2 can be interchanged. You can learn how to program direct plus in the next section. Weighing using indirect plus...

  • Page 11

    9 3. You can now enter a tare weight for this plu. The displays will now show the following: 4. Once you have entered the tare, press the mw key. Step 5 is percent tare programming. This feature can be disabled so if you do not see the following displays then go to step 6. (only an easy weigh™ autho...

  • Page 12

    10 check stand operation if you have purchased your pc-100 scale with the rs-232 kit you will be able to interface your scale to a pc or virtually any ecr (electronic cash register.) if you do not have this feature or aren’t sure, please contact your local easy weigh™ authorized dealer to assist you...

  • Page 13

    11 options & accessories the following options are available through your easy weigh™ authorized dealer: description part number fish pan platter 260-00001-020001 rs-232 kit 070-10001-020000 spill-proof overlay (wet cover) 101-00001-020000 ac power cord 690-00001-02002m adjusting feet (set of 4) 4b0...

  • Page 14

    12 a complete list of cable diagrams is located at: http://www.Easyweighscales.Com/ docs/pc-100 cable diagrams p.Pdf/ a complete list of cable diagrams is also located in the pc-100 service manual. Interface cross reference chart make type setting models casio 01 sa-3000 crs 02 crs-3000 datasym 02 d...

  • Page 16

    Easy weigh www.Atronsystems.Com copyright 2005, all rights reserved. 800-20101-020000