Easygreen Easy 800 L User Manual - page 2
The EASY 800 will measure either in units of Metres or Yards. To Switch
from one unit to the other, with the power on, simply hold down the Mode
Button for three (3) seconds. The unit measurement indicator will switch
beside the Main Target Distance from
M to YD. Once a unit is selected, the
unit selection will remain even after the power is turned off between usage.
UNIT MODE
To turn the EASY 800 on, press the power button. The device power
will remain on for 15 seconds or until a measurement is taken.
POWER ON
The EASY 800 has the ability to measure relative
distances between many targets. To do this a second
target is selected at a different distance, either further
away or closer than the Main Target Distance. Simply
aim with the aiming recticle and select a new target in
relatively in the same direction as the Main Target and
press the Plus Minus Button . When a second
target is aquired, the T or Target Icon will appear,
showing a Main Target distance is in memory.
PLUS MINUS™ MODE
Press and hold the Power/Target Button while
aiming the aiming recticle at a target. A distance to the
Main Target should appear on the Main Target
Distance readout, 123 Metres as shown in this
example. The device will also indicate returning signal
strength and show a laser out signal to show that a
measurement is being taken.
MAIN TARGET MODE
The Plus Minus Distance Indicator will now show
the relative distance of this second target 38 metres
from the first Main Target Distance to the second target
for example. In the Plus Minus Mode, many additional
targets can be measured. For example a closer
distance to the player can be measured by again
aiming and pressing the Plus Minus Button . A
target 29 meters in front of the Main Target distance.
The Plus Minus system can be used in numerous ways and in many
situations on a golf course where you wish to quickly calculate relative
distances. Determine the landing area between the flag and the front or back
of a green, the distance across a water hazard for approach shots, width of
the fairway on a dog leg hole at the turn, length of a sand trap in front of a
green, distance from a landing area to the green while still on the tee and
many more applications.
To Exit Plus Minus Mode, simply select a new Main Target by pressing the
Power/Target Button and the device will return to the Main Target Mode.
To turn on the RAIN Mode, with the power on, simply
press the Mode Button and the device will enter
into rain mode and the word RAIN will appear in the
view display. The RAIN Mode can be used during
rainy conditions to filter out false readings caused by
raindrops and the device will not take readings closer
than 60 metres. IMPORTANT: To take readings closer
than 60 metres, you will have to exit RAIN Mode by
pressing the Mode Button until the device is out of
any advanced mode and no mode icons appear in the
view display.
RAIN MODE
To turn on the FOG Mode, with the power on, press the
Mode Button until the word FOG appears in the
view display. The FOG Mode will help the device to
filter out false signals caused by fog or dust and
provide a more reliable signal from the Target.
FOG MODE
To turn on the LONG Mode, with the power on, press
the Mode Button until the word LONG appears in
the view display. The LONG Mode will filter out signals
returned from closer than 150 metres. This mode is
designed to be used when there are objects such as
trees or bushes that are closer than the target and are
causing false signals. Keep in mind this mode only
works when the target is farther than 150 metres away.
LONG MODE
To return to the standard target mode, with the power on, press the Mode
Button until no RAIN, FOG or LONG mode icons appear.
STANDARD MODE
In the view dispay, the strength of the returning laser signal is displayed
beside the S Icon. When a good signal is returned to the device, this will be
displayed as shown below. When a poor signal is returned, the device may
be unable to display a distance reading. Try aiming at a clearer or more
direct target to improve the return signal.
SIGNAL STRENGTH
GOOD SIGNAL
POOR SIGNAL
If the battery strength drops below 10 percent power
remaining, the low battery icon will appear in the view
display. Replace with a quality CR2 3V battery.
BATTERY STRENGTH
Easygreen AB
Lövåsen 2
139 40
Värmdö
Sweden
Tel: +46(0)8 22 65 65
www.easygreen.se
info@easygreen.se
Easygreen (Hong Kong) Ltd.
Flat 11, 4/F, Kwai Cheong Centre
50 Kwai Cheong Road
Kwai Chung, N.T.
Hong Kong
(852) 2489-8288
www.easygreen.com.hk
info@easygreen.com.hk
Copyright © 2012 by Easygreen Industries (Hong Kong) Ltd.
Easygreen, EASY 800, and the Plus Minus Logo are Registered Trademarks
of Easygreen AB and Easygreen Industries (Hong Kong) Ltd.
All Designs are Patented or Patent Pending Status Worldwide.
WARRANTY
This product is covered by a Two (2) Year Limited Warranty with proof of
purchase against defects in workmanship or materials.
When the laser is active and the device is emmiting a
laser to aquire a target distance, the laser icon will
appear in the view display.
LASER ACTIVE
SPECIFICATIONS
OPERATING RANGE 5 - 800 metres ( 5 - 875 Yards )
OBJECTIVE LENS 6.0 Magnification x Ø 26mm
FIELD OF VIEW
122m / 1000m
EYE RELIEF 17.5 mm
ACCURACY ± 1m or ±0.1%
LENS Fully Multi Coated (FMC)
WEATHERPROOF Sealed Housing and Battery Housing
DURABLE Silicon Ergonomic Grip
BATTERY CR2 3V Lithium
BATTERY LIFE
3000 - 5000 Uses with Low Indicator
DIMENSIONS 128mm x 46mm x 88mm
WIEGHT 325 grams
CONTACT