Product instruction manual easymount sign laminator ems-650 the easymount sign has been designed to be user friendly, however we strongly recommend you take a few minutes to read through this manual to ensure correct operation. Keep this manual safe for future reference..
2 contents page 3 - introduction page 4 - safety instructions and environmental requirements page 5 - control panel and specifications page 6 - operating instructions page 7 - cleaning and maintenance of the system & spare parts page 8 - warranty.
3 pressure control knob feed table top roller bottom roller foot switch control panel emergency stop supply roll tension knob core adaptor roll shaft introduction thank you for purchasing the easymount® sign laminator. This easymount® sign laminator is designed to perform and built to last, with its...
4 safety instructions • please ensure that the voltages of the power supply you are using match with rated working voltages before operating the machine • the power supply should be close to the system for convenient use • the power supply should provide reliable protective earthing connection • bef...
5 speed control forward / reverse auto / foot pedal control panel ems-650 max. Laminating width 650mm max. Laminating thickness 15mm laminating speed 5m/min rated working voltage/frequency 220v-240v, 50hz-60hz rate input power 50w dimensions 850 x 300 x 470mm gross machine weight 33kg specifications...
6 the photocell will function as follows: • auto: in auto control mode the rollers will stop immediately when the photocell is interrupted. A beep will sound if there is a blockage between the photocell sensor. Once the blockage is removed and you have activated the reset switch, the rollers will be...
7 cold lamination • adjust the pressure control on both sides according to the thickness and the finish of the film. Turning the pressure control clockwise will increase the pressure. Turning the control anti-clockwise will decrease the pressure. To adjust to the optimum pressure, increase the press...
8 warranty & incorrect use important information your easymount sign laminator should reach you in perfect condition and is guaranteed for 1 year from date of purchase covering defective parts and general wear and tear, this does not cover film jams, misfeeds or other operator related errors, which ...
